Hi,
this patch adds support for esd's CPCI-ASIO4 4-port serial interface board.
The new PCI ids are added to include/linux/pci_ids.h.
Matthias
Signed-off-by: Matthias Fuchs <matthias.fuchs@xxxxxxxxxxxxxxxxxxx>
---
commit 5513f516c850f1e3422ca4316a255b09edbe214e
tree 7141cb8087cdf9da6601a95d4921db70262e7c3a
parent e1036502e5263851259d147771226161e5ccc85a
author Matthias Fuchs <matthias.fuchs@xxxxxxxxxxxxxxxxxxx> Fri, 15 Dec 2006
09:27:36 +0100
committer Matthias Fuchs <matthias.fuchs@xxxxxxxxxxxxxxxxxxx> Fri, 15 Dec 2006
09:27:36 +0100
drivers/serial/8250_pci.c | 11 +++++++++++
include/linux/pci_ids.h | 3 +++
2 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 4d0ff8f..3de8f14 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -936,6 +936,7 @@ enum pci_board_num_t {
pbn_b2_1_115200,
pbn_b2_2_115200,
+ pbn_b2_4_115200,
pbn_b2_8_115200,
pbn_b2_1_460800,
@@ -1249,6 +1250,12 @@ static struct pciserial_board pci_boards
.base_baud = 115200,
.uart_offset = 8,
},
+ [pbn_b2_4_115200] = {
+ .flags = FL_BASE2,
+ .num_ports = 4,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
[pbn_b2_8_115200] = {
.flags = FL_BASE2,
.num_ports = 8,
@@ -1990,6 +1997,10 @@ static struct pci_device_id serial_pci_t
{ PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_panacom2 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
+ PCI_VENDOR_ID_ESDGMBH,
+ PCI_DEVICE_ID_ESDGMBH_CPCIASIO4, 0, 0,
+ pbn_b2_4_115200 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_CHASE_PCIFAST,
PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0,
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 51180db..4d170e0 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -949,6 +949,7 @@
#define PCI_DEVICE_ID_PLX_R753 0x1152
#define PCI_DEVICE_ID_PLX_OLITEC 0x1187
#define PCI_DEVICE_ID_PLX_PCI200SYN 0x3196
+#define PCI_DEVICE_ID_PLX_9030 0x9030
#define PCI_DEVICE_ID_PLX_9050 0x9050
#define PCI_DEVICE_ID_PLX_9080 0x9080
#define PCI_DEVICE_ID_PLX_GTEK_SERIAL2 0xa001
@@ -1681,6 +1682,8 @@
#define PCI_VENDOR_ID_ELECTRONICDESIGNGMBH 0x12f8
#define PCI_DEVICE_ID_LML_33R10 0x8a02
+#define PCI_VENDOR_ID_ESDGMBH 0x12fe
+#define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
#define PCI_VENDOR_ID_SIIG 0x131f
#define PCI_SUBVENDOR_ID_SIIG 0x131f
--
-----------------------------------------------------------------------
Dipl.-Ing. Matthias Fuchs esd electronic system design gmbh
http://www.esd-electronics.com Vahrenwalder Str. 207
phone: +49-511-37298-0, fax: -68 30165 Hannover, Germany
-----------------------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
