The patch below is necessary for 115200 baud on an OMAP1510 internal UART. It's been in the linux-omap tree for some time and with it applied to a vanilla Linus git tree the serial console on the Amstrad Delta (which is OMAP1510 based and whose initial bootloader runs at 115200) works fine (it doesn't without it). Is there any possibility of getting it accepted into mainline? It shouldn't affect any other platform due to the ifdef/cpu_is guards. Signed-Off-By: Jonathan McDowell <noodles@xxxxxxxx> ----- diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index bbf78aa..76cd21d 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -1885,6 +1885,17 @@ #endif serial_outp(up, UART_EFR, efr); } +#ifdef CONFIG_ARCH_OMAP15XX + /* Workaround to enable 115200 baud on OMAP1510 internal ports */ + if (cpu_is_omap1510() && is_omap_port((unsigned int)up->port.membase)) { + if (baud == 115200) { + quot = 1; + serial_out(up, UART_OMAP_OSC_12M_SEL, 1); + } else + serial_out(up, UART_OMAP_OSC_12M_SEL, 0); + } +#endif + if (up->capabilities & UART_NATSEMI) { /* Switch to bank 2 not bank 1, to avoid resetting EXCR2 */ serial_outp(up, UART_LCR, 0xe0); ----- J. -- ] http://www.earth.li/~noodles/ [] 101 things you can't have too much [ ] PGP/GPG Key @ the.earth.li [] of : 1 - Cable ties. [ ] via keyserver, web or email. [] [ ] RSA: 4DC4E7FD / DSA: 5B430367 [] [ - To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html