Dear Neil,
I agree with you so that I already review code related to Accept and
Bind are listed below but still can't find the problem at this moment.
Would you give me some hint?
Moreover, in your utility, can your secondary IP return heartbeat ACK to client?
int SctpAcceptor::accept(
Handle *newHandle,
SctpAssociation *newChannel,
InetAddr *remoteAddrCopy)
{
void *addrPtr = NULL;
SOCKLEN_T peersize = 0;
if (remoteAddrCopy) {
addrPtr = remoteAddrCopy->getAddr();
peersize = remoteAddrCopy->size();
}
SOCKET newSockFd = ::accept((SOCKET)handle.fd, (struct
sockaddr *)addrPtr, &peersize);
if (newSockFd == INVALID_SOCKET) {
int errorCode = errno;
if (errorCode) perror("accept ");
return -1;
} else {
// We should check the validity of the new socket here
//make sure we receive MSG_NOTIFICATION (without this,
we can't read sinfo_ppid correctly)
struct sctp_event_subscribe event;
memset(&event, 0, sizeof(event));
event.sctp_data_io_event = 1;
event.sctp_association_event = 1;
event.sctp_address_event = 1;
event.sctp_send_failure_event = 1;
event.sctp_peer_error_event = 1;
event.sctp_partial_delivery_event = 1;
event.sctp_shutdown_event = 1;
// Must hardcode sizeof(sctp_event_subscribe) to 8;
otherwise will fail
if (::setsockopt(newSockFd, IPPROTO_SCTP, SCTP_EVENTS,
& event, 8) < 0) {
perror("setsockopt(SCTP_EVENTS): ");
// Unable to set socket option
CLOSE_SOCKET(newSockFd);
return -3;
}
Handle h((int *)newSockFd, Handle::SOCKET);
if (newHandle) {
*newHandle = h;
}
if (newChannel) {
newChannel->setHandle(&h); // Once the
handle is set, we can retrieve the local & remote addr
newChannel->setReadStatus(StreamConnection::STATUS_READ_READY);
}
if (!newHandle && !newChannel) {
// Both pointers are null is disallowed.
CLOSE_SOCKET(newSockFd);
return -2;
}
return 0;
}
}
int SctpAcceptor::bind(SOCKET fd, const MultiHomedInetAddr &addr)
{
char ipStr[128];
int rc;
int secondaryAddrCount = addr.getSecondaryAddrCount();
InetAddr primaryAddr = addr; // Get the
primary address first
if (secondaryAddrCount == 0 && primaryAddr.getPort() == 0) {
return -1; // Acceptor must have a port to bind
}
primaryAddr.getIp(ipStr);
printf("fd=%d. Binding to primary addr %s:%d...\n", (int)fd,
ipStr, primaryAddr.getPort());
// We must call bind() first before calling bindx()
if ((rc = ::bind(fd, (struct sockaddr *)primaryAddr.getAddr(),
primaryAddr.size())) < 0) {
int errorCode = errno;
if (errorCode) perror("bind ");
}
if (!rc && secondaryAddrCount > 0) {
SOCKADDR_IN *addrList = new SOCKADDR_IN[secondaryAddrCount];
addr.getSecondaryAddr(addrList, secondaryAddrCount);
for(int i=0; i<secondaryAddrCount;i++) {
char ip[32];
inet_ntop(addrList[i].sin_family, &addrList[i].sin_addr, ip,
(addrList[i].sin_family == AF_INET) ?
INET_ADDRSTRLEN : INET6_ADDRSTRLEN);
unsigned port = ntohs(addrList[i].sin_port);
printf("Bind to secondary (%s : %d)\n", ip, port);
}
rc = sctp_bindx(fd, (struct sockaddr *)addrList,
secondaryAddrCount, SCTP_BINDX_ADD_ADDR);
delete [] addrList;
if (rc < 0) {
int errorCode = errno;
if (errorCode) perror("bindx ");
}
}
// No need to close the socket if rc < 0, because outer
function will close it for us
return rc;
}
Regards,
Andrew
On Fri, Nov 8, 2013 at 8:12 PM, Neil Horman <nhorman@xxxxxxxxxxxxx> wrote:
> On Fri, Nov 08, 2013 at 11:35:51AM +0800, tsoi andrew wrote:
>> Dear Neil,
>>
>> The 176 routing is ok because when I shift 172.28.129.176 to primary address.
>> The 176 can be establish but 48 failed.
>> I guess it is related to primary and secondary setting. Can secondary
>> IP be established also?
>>
>> sctp 172.28.129.176:9082
>> LISTEN
>> 172.28.129.48:9082
>>
>> sctp 0 0 172.28.129.176:9082 10.82.29.240:9082
>> ESTABLISHED
>> Regards,
>> Andrew
>>
> If thats the case I would suspect that something is wrong with either your
> sysctl settings or your application. I can use the sctp_darn utility included
> in lksctp-tools to set up a multihomed connection here without issue
> Neil
>
>> On Thu, Nov 7, 2013 at 10:16 PM, Neil Horman <nhorman@xxxxxxxxxxxxx> wrote:
>> > On Thu, Nov 07, 2013 at 11:45:25AM +0800, tsoi andrew wrote:
>> >> Dear Neil,
>> >>
>> >> Attached file is our tcpdump.
>> >> Now our secondary IP doesn't work.
>> >> Please advise. Thanks.
>> >>
>> >> IP info:
>> >> lksctp primary IP is 172.28.129.49
>> >> lksctp secondary IP is 172.28.129.176
>> >>
>> >> Client IP is 10.82.29.240/10.82.29.241
>> >>
>> >>
>> > I think you mean the lksctp primary is 172.28.129.48, not 49, but no matter.
>> >
>> > Looking at this, its not just heartbeats that arent getting answered, nothing is
>> > getting responded to via the 176 address. The only data that I see come out of
>> > that address are two abort frames (not sure what the cause is there yet).
>> >
>> > I would start by verifying basic connectivity via that address. I'd try
>> > something like:
>> > ping -I 172.28.129.176 10.82.29.240
>> > and
>> > ping -I 172.28.129.176 10.82.29.241
>> >
>> > while running a tcpdump on the interface that holds the 176 address specifically
>> > to make sure that you're routing tables locally and network in generally can
>> > pass traffic over that address
>> >
>> > Neil
>> >
>> >>
>> >>
>> >>
>> >> Regards,
>> >> Andrew
>> >>
>> >> On Thu, Nov 7, 2013 at 10:43 AM, tsoi andrew <tsoiandrew@xxxxxxxxx> wrote:
>> >> > Dear Neil,
>> >> >
>> >> > For more information, our secondary IP doesn't response COOKIE_ECHO
>> >> > also. Only our primary IP can response COOKIE_ECHO with COOKIE_ACK.
>> >> >
>> >> > Regards,
>> >> > Andrew
>> >> >
>> >> > On Thu, Nov 7, 2013 at 10:36 AM, tsoi andrew <tsoiandrew@xxxxxxxxx> wrote:
>> >> >> Dear Neil,
>> >> >>
>> >> >> Please find my network diagram first.
>> >> >> Now at server side, can't see our lksctp client 4 connection but only
>> >> >> 2 2 connection. The reason is that heartbeat ACK not found.
>> >> >>
>> >> >> Regards,
>> >> >> Andrew
>> >> >>
>> >> >> On Mon, Nov 4, 2013 at 8:09 PM, Neil Horman <nhorman@xxxxxxxxxxxxx> wrote:
>> >> >>> On Mon, Nov 04, 2013 at 09:59:44AM +0800, tsoi andrew wrote:
>> >> >>>> Dear Sir,
>> >> >>>>
>> >> >>>> I got a problem when set multi-homing to active/active.
>> >> >>>> That mean, It is expected that our lksctp server have 2 IP to connect
>> >> >>>> 2 IP of destination client with total 4 connections.
>> >> >>>> The flow is that client send "INIT" message with 2 (primary and
>> >> >>>> secondary) IP to our server and lksctp server return INIT_ACK. But
>> >> >>>> when second client send 'heartbeat' to us, lksctp server cannot return
>> >> >>>> ACK.
>> >> >>>> Moreover, we already proved our connectivity correct because when our
>> >> >>>> lksctp server send heartbeat to both destination client and they can
>> >> >>>> return ACK.
>> >> >>>> Would you mind sharing if lksctp lib already configure those
>> >> >>>> multi-homing purpose.
>> >> >>>>
>> >> >>> Can you provide a network diagram and a tcpdump of your connection?
>> >> >>> Neil
>> >> >>>
>> >> >>>>
>> >> >>>>
>> >> >>>> Best Regards,
>> >> >>>> Andrew Tsoi
>> >> >>>> --
>> >> >>>> To unsubscribe from this list: send the line "unsubscribe linux-sctp" in
>> >> >>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> >> >>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> >> >>>>
>> >
>> >
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-sctp" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
