Large PIO transfers are broken up into chunks to try to avoid disabling
local IRQs for long periods. But IRQs are still disabled for too long
and this causes SCC FIFO overruns during serial port transfers.
This patch reduces the PIO chunk size to reduce interrupt latency to
something on the order of milliseconds, at the expense of additional CPU
overhead from extra iterations of the NCR5380_main() loop.
That CPU overhead is a problem for slow machines (e.g. mac_scsi on 25 MHz
68030) but these machines generally use PDMA not PIO. This patch doesn't
make the overhead any worse on my Mac LC III (because it only gets about
510 accesses per ms).
This patch decreases disk performance by a fraction of one percent for
dmx3191d on my 333 MHz PowerPC 750. Other affected hardware (such as
g_NCR5380 on x86) was not tested but 5380 ISA cards generally use PDMA
and not PIO.
Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
---
Changed since v1:
- PIO transfer chunk size is now hard-coded for simplicity.
---
drivers/scsi/NCR5380.c | 8 ++++----
drivers/scsi/NCR5380.h | 2 ++
2 files changed, 6 insertions(+), 4 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-08-31 14:44:51.000000000 +1000
+++ linux/drivers/scsi/NCR5380.c 2016-08-31 14:44:52.000000000 +1000
@@ -1849,11 +1849,11 @@ static void NCR5380_information_transfer
/* XXX - need to source or sink data here, as appropriate */
}
} else {
- /* Break up transfer into 3 ms chunks,
- * presuming 6 accesses per handshake.
+ /* Transfer a small chunk so that the
+ * irq mode lock is not held too long.
*/
- transfersize = min((unsigned long)cmd->SCp.this_residual,
- hostdata->accesses_per_ms / 2);
+ transfersize = min(cmd->SCp.this_residual,
+ NCR5380_PIO_CHUNK_SIZE);
len = transfersize;
NCR5380_transfer_pio(instance, &phase, &len,
(unsigned char **)&cmd->SCp.ptr);
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2016-08-31 14:44:51.000000000 +1000
+++ linux/drivers/scsi/NCR5380.h 2016-08-31 14:44:52.000000000 +1000
@@ -250,6 +250,8 @@ struct NCR5380_cmd {
#define NCR5380_CMD_SIZE (sizeof(struct NCR5380_cmd))
+#define NCR5380_PIO_CHUNK_SIZE 256
+
static inline struct scsi_cmnd *NCR5380_to_scmd(struct NCR5380_cmd *ncmd_ptr)
{
return ((struct scsi_cmnd *)ncmd_ptr) - 1;
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
