Re: [RFC PATCH 74/71] ncr5380: Enable PDMA for NCR53C400A

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 29 Nov 2015, Ondrej Zary wrote:

> Add I/O register mapping for NCR53C400A and enable PDMA mode to
> improve performance and fix non-working IRQ.
> 
> Tested with HP C2502 (and user-space enabler).
> 
> Signed-off-by: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
> ---
>  drivers/scsi/g_NCR5380.c |   11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
> index ce444da..c3abe48 100644
> --- a/drivers/scsi/g_NCR5380.c
> +++ b/drivers/scsi/g_NCR5380.c
> @@ -324,7 +324,10 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
>  #endif
>  			break;
>  		case BOARD_NCR53C400A:
> +			flags = FLAG_NO_DMA_FIXUP;
> +#ifndef PSEUDO_DMA
>  			flags = FLAG_NO_PSEUDO_DMA;
> +#endif

FLAG_NO_PSEUDO_DMA is not tested unless defined(PSEUDO_DMA), so it 
shouldn't be set here. I know I made the same mistake in patch 8; it will 
be fixed in the next submission.

-- 

>  			ports = ncr_53c400a_ports;
>  			break;
>  		case BOARD_DTC3181E:
> @@ -412,6 +415,11 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
>  			hostdata->c400_blk_cnt = 1;
>  			hostdata->c400_host_buf = 4;
>  		}
> +		if (overrides[current_override].board == BOARD_NCR53C400A) {
> +			hostdata->c400_ctl_status = 9;
> +			hostdata->c400_blk_cnt = 10;
> +			hostdata->c400_host_buf = 8;
> +		}
>  #else
>  		instance->base = overrides[current_override].NCR5380_map_name;
>  		hostdata->iomem = iomem;
> @@ -425,7 +433,8 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
>  		if (NCR5380_init(instance, flags))
>  			goto out_unregister;
>  
> -		if (overrides[current_override].board == BOARD_NCR53C400)
> +		if (overrides[current_override].board == BOARD_NCR53C400 ||
> +		    overrides[current_override].board == BOARD_NCR53C400A)
>  			NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
>  
>  		NCR5380_maybe_reset_bus(instance);
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux