Re: [PATCH 18/18] scsi_dh_alua: use scsi_vpd_tpg_id()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2015-11-09 at 16:08 +0100, Hannes Reinecke wrote:
> Signed-off-by: Hannes Reinecke <hare@xxxxxxx>
> ---
>  drivers/scsi/device_handler/scsi_dh_alua.c | 39 +++++---------------
> ----------
>  1 file changed, 6 insertions(+), 33 deletions(-)
> 
> diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c
> b/drivers/scsi/device_handler/scsi_dh_alua.c
> index abf05b4..20fe981 100644
> --- a/drivers/scsi/device_handler/scsi_dh_alua.c
> +++ b/drivers/scsi/device_handler/scsi_dh_alua.c
> @@ -320,38 +320,10 @@ static int alua_check_tpgs(struct scsi_device
> *sdev)
>   */
>  static int alua_check_vpd(struct scsi_device *sdev, struct
> alua_dh_data *h)
>  {
> -	unsigned char *d;
> -	unsigned char __rcu *vpd_pg83;
> +	int rel_port = -1, group_id;
>  
> -	rcu_read_lock();
> -	if (!rcu_dereference(sdev->vpd_pg83)){
> -		rcu_read_unlock();
> -		return SCSI_DH_DEV_UNSUPP;
> -	}
> -
> -	/*
> -	 * Look for the correct descriptor.
> -	 */
> -	vpd_pg83 = rcu_dereference(sdev->vpd_pg83);
> -	d = vpd_pg83 + 4;
> -	while (d < vpd_pg83 + sdev->vpd_pg83_len) {
> -		switch (d[1] & 0xf) {
> -		case 0x4:
> -			/* Relative target port */
> -			h->rel_port = get_unaligned_be16(&d[6]);
> -			break;
> -		case 0x5:
> -			/* Target port group */
> -			h->group_id = get_unaligned_be16(&d[6]);
> -			break;
> -		default:
> -			break;
> -		}
> -		d += d[3] + 4;
> -	}
> -	rcu_read_unlock();
> -
> -	if (h->group_id == -1) {
> +	group_id = scsi_vpd_tpg_id(sdev, &rel_port);
> +	if (group_id < 0) {
>  		/*
>  		 * Internal error; TPGS supported but required
>  		 * VPD identification descriptors not present.
> @@ -360,10 +332,11 @@ static int alua_check_vpd(struct scsi_device
> *sdev, struct alua_dh_data *h)
>  		sdev_printk(KERN_INFO, sdev,
>  			    "%s: No target port descriptors
> found\n",
>  			    ALUA_DH_NAME);
> -		h->state = TPGS_STATE_OPTIMIZED;
> -		h->tpgs = TPGS_MODE_NONE;
>  		return SCSI_DH_DEV_UNSUPP;
>  	}
> +	h->rel_port = rel_port;
> +	h->group_id = group_id;
> +
>  	sdev_printk(KERN_INFO, sdev,
>  		    "%s: port group %02x rel port %02x\n",
>  		    ALUA_DH_NAME, h->group_id, h->rel_port);

Reviewed-by: Johannes Thumshirn <jthumshirn@xxxxxxx>

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux