Last time we have posted a set of patches which combine the mpt2sas
and mpt3sas driver code. and we are generating two driver modules
(i.e. two separate .ko's) from this Combined driver source.
Now we have modified above Combined driver source (i.e. single driver
source with two .ko's) to a Merged driver source (i.e. sing source with
single .ko) which supports both LSI MPT Fusion SAS 2.0 and SAS 3.0
generation HBAs.
Here I am once again posting first 18 patches of Combined driver source
along with last 7 patches which converts this Combined driver source to
Merged driver source.
Here is the change list from Combined driver src to Merged driver src
* Added SAS 2.0 HBA device IDs to the mpt3sas_pci_table pci table.
* Created two separate SCSI host templates for SAS2 and SAS3 HBAs. So
that, during the driver load time driver can use
corresponding host template(based the pci device ID) while
registering a scsi host adapter instance for that pci device.
* Registered two IOCTL devices, mpt2ctl is for SAS2 HBAs & mpt3ctl for
SAS3 HBAs. Also updated the code to make sure that mpt2ctl device to
process only those ioctl cmds issued for the SAS2 HBAs and mpt3ctl
device to process only those ioctl cmds issued for the SAS3 HBAs.
* Added two separate ioc number indexing for SAS2 and SAS3 HBAs.
* Replaced compile time check 'MPT2SAS_SCSI' to run time check
'hba_mpi_version_belonged' wherever needed.
* Aliased this merged driver to mpt2sas using MODULE_ALIAS.so that
still user can load this merged driver with 'modprobe mpt2sas'.
* Moved global variable 'driver_name' to per adapter instance variable.
* Created two raid function templates and used corresponding raid
function templates based on the run time check
'hba_mpi_version_belonged'.
* Moved mpt2sas_warpdrive.c file from mpt2sas to mpt3sas folder and
renamed it as mpt3sas_warpdrive.c.
* Updated the Makefile to built as a mpt3sas_warpdrive.o file.
* Added module parameter 'hbas_to_enumarate', which user can use this
merged driver as legacy mpt2sas driver or as a
legacy mpt3sas driver if needed.
Here are the available options for this module parameter
0 - Merged driver which enumerates both SAS 2.0 & SAS 3.0 HBAs
1 - Acts as legacy mpt2sas driver, which enumerates only SAS 2.0 HBAs
2 - Acts as legacy mpt3sas driver, which enumerates only SAS 3.0 HBAs
* Added SCSI_MPT3SAS_MERGED config option, This Kconfig option is only
used for legacy mpt2sas/mpt3sas interoperability.
In patch 5 (ie. mpt2sas: Removed .c and .h files from mpt2sas driver)
we are just removing mpt2sas driver files. so one can just provide below
command if this patch is not reached to linux-scsi community mail list,
"git rm drivers/scsi/mpt2sas/mpt2sas_base.*
drivers/scsi/mpt2sas/mpt2sas_config.c
drivers/scsi/mpt2sas/mpt2sas_ctl.*
drivers/scsi/mpt2sas/mpt2sas_scsih.c
drivers/scsi/mpt2sas/mpt2sas_transport.c
drivers/scsi/mpt2sas/mpt2sas_debug.h"
Thanks,
Sreekanth
Sreekanth Reddy (25):
mpt2sas: Use mpi headers from mpt3sas
mpt3sas: Added mpt2sas driver definitions
mpt3sas: Move Gen3 HBA's device registration with PCI, SML and IOCTL
related API's to a separate file
mpt2sas: Created mpt2sas_module.c file in which Gen2 HBA's are
registers with PCI, SML and IOCTLs
mpt2sas: Removed .c and .h files from mpt2sas driver
mpt3sas: Define 'hba_mpi_version_belonged' IOC variable
mpt2sas, mpt3sas : Removed SCSI_MPTXSAS_LOGGING entry from Kconfig
mpt3sas: For an IO, build MPI SGL LIST on GEN2 HBA's and build IEEE
SGL LIST on GEN3 HBA's
mpt3sas: Don't send PHYDISK_HIDDEN Raid Action request on SAS2 HBA's
mpt3sas: Manage MSIX vectors according to HBA device type
mpt3sas: fix for driver fails EEH, recovery from injected pci bus
error
mpt3sas: Ported WarpDrive product SSS6200 support
mpt3sas: Ported the providing sysfs attribute to report Backup Rail
Monitor Status
mpt3sas: Refcount sas_device objects and fix unsafe list usage
mpt3sas: Refcount fw_events and fix unsafe list usage
mpt3sas: Added OEMs Gen2 PnP ID Branding names
mpt3sas: setpci reset kernel oops fix
mpt2sas, mpt3sas: Update the driver versions
mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0
HBA's
mpt3sas: Moved Warpdriver specific functions to mpt3sas_warpdrive.c
mpt2sas: Removed mpt2sas folder
mpt3sas: Added a module parameter hbas_to_enumerate
mpt2sas: Removed mpt2sas entries from SCSI's Kconfig and Makefile
mpt3sas: Added SCSI_MPT3SAS_MERGED config option
mpt3sas: Bump mpt3sas driver version to 09.102.00.00
drivers/scsi/Kconfig | 1 -
drivers/scsi/Makefile | 1 -
drivers/scsi/mpt2sas/Kconfig | 67 -
drivers/scsi/mpt2sas/Makefile | 7 -
drivers/scsi/mpt2sas/mpi/mpi2.h | 1170 ----
drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h | 3068 -----------
drivers/scsi/mpt2sas/mpi/mpi2_init.h | 461 --
drivers/scsi/mpt2sas/mpi/mpi2_ioc.h | 1708 ------
drivers/scsi/mpt2sas/mpi/mpi2_raid.h | 366 --
drivers/scsi/mpt2sas/mpi/mpi2_sas.h | 288 -
drivers/scsi/mpt2sas/mpi/mpi2_tool.h | 481 --
drivers/scsi/mpt2sas/mpi/mpi2_type.h | 61 -
drivers/scsi/mpt2sas/mpt2sas_base.c | 4899 -----------------
drivers/scsi/mpt2sas/mpt2sas_base.h | 1235 -----
drivers/scsi/mpt2sas/mpt2sas_config.c | 1527 ------
drivers/scsi/mpt2sas/mpt2sas_ctl.c | 3101 -----------
drivers/scsi/mpt2sas/mpt2sas_ctl.h | 419 --
drivers/scsi/mpt2sas/mpt2sas_debug.h | 182 -
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 8855 ------------------------------
drivers/scsi/mpt2sas/mpt2sas_transport.c | 2173 --------
drivers/scsi/mpt3sas/Kconfig | 29 +-
drivers/scsi/mpt3sas/Makefile | 3 +-
drivers/scsi/mpt3sas/mpt3sas_base.c | 668 ++-
drivers/scsi/mpt3sas/mpt3sas_base.h | 233 +-
drivers/scsi/mpt3sas/mpt3sas_config.c | 42 +-
drivers/scsi/mpt3sas/mpt3sas_ctl.c | 259 +-
drivers/scsi/mpt3sas/mpt3sas_ctl.h | 6 +-
drivers/scsi/mpt3sas/mpt3sas_debug.h | 16 +-
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 1555 ++++--
drivers/scsi/mpt3sas/mpt3sas_transport.c | 18 +-
drivers/scsi/mpt3sas/mpt3sas_warpdrive.c | 344 ++
31 files changed, 2447 insertions(+), 30796 deletions(-)
delete mode 100644 drivers/scsi/mpt2sas/Kconfig
delete mode 100644 drivers/scsi/mpt2sas/Makefile
delete mode 100644 drivers/scsi/mpt2sas/mpi/mpi2.h
delete mode 100644 drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
delete mode 100644 drivers/scsi/mpt2sas/mpi/mpi2_init.h
delete mode 100644 drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
delete mode 100644 drivers/scsi/mpt2sas/mpi/mpi2_raid.h
delete mode 100644 drivers/scsi/mpt2sas/mpi/mpi2_sas.h
delete mode 100644 drivers/scsi/mpt2sas/mpi/mpi2_tool.h
delete mode 100644 drivers/scsi/mpt2sas/mpi/mpi2_type.h
delete mode 100644 drivers/scsi/mpt2sas/mpt2sas_base.c
delete mode 100644 drivers/scsi/mpt2sas/mpt2sas_base.h
delete mode 100644 drivers/scsi/mpt2sas/mpt2sas_config.c
delete mode 100644 drivers/scsi/mpt2sas/mpt2sas_ctl.c
delete mode 100644 drivers/scsi/mpt2sas/mpt2sas_ctl.h
delete mode 100644 drivers/scsi/mpt2sas/mpt2sas_debug.h
delete mode 100644 drivers/scsi/mpt2sas/mpt2sas_scsih.c
delete mode 100644 drivers/scsi/mpt2sas/mpt2sas_transport.c
create mode 100644 drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
--
2.0.2
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
