[PATCH] scsi: Set sg_tablesize to 1, for LLDDs that set SG_NONE

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Oops while testing blk_mq over the new cxlflash driver.

[ 2960.817172] Oops: Kernel access of bad area, sig: 11 [#5]
[ 2960.817309] NIP  __blk_mq_run_hw_queue+0x278/0x4c0
[ 2960.817313] LR __blk_mq_run_hw_queue+0x2bc/0x4c0
[ 2960.817314] Call Trace:
[ 2960.817320] __blk_mq_run_hw_queue+0x2bc/0x4c0 (unreliable)
[ 2960.817324] blk_mq_run_hw_queue+0xd8/0x100
[ 2960.817329] blk_mq_insert_requests+0x14c/0x1f0
[ 2960.817333] blk_mq_flush_plug_list+0x150/0x190
[ 2960.817338] blk_flush_plug_list+0x11c/0x2b0
[ 2960.817344] blk_finish_plug+0x58/0x80
[ 2960.817348] __do_page_cache_readahead+0x1c0/0x2e0
[ 2960.817352] force_page_cache_readahead+0x68/0xd0
[ 2960.817356] generic_file_read_iter+0x43c/0x6a0
[ 2960.817359] blkdev_read_iter+0x68/0xa0
[ 2960.817361] __vfs_read+0x11c/0x180
[ 2960.817364] vfs_read+0xa4/0x1c0
[ 2960.817366] SyS_read+0x6c/0x110
[ 2960.817369] system_call+0x38/0xb4

The root cause of the problem was this low level device driver(LLDD),
in this case cxlflash, does not support scatter-gather and hence had
set it's sg_tablesize to SG_NONE (value of 0). In reality the tablesize
is of length 1. This value of SG_NONE does not cause any problems with
the standard block driver stack but causes issues for blk_mq, as shown
above. Since quite a few of the legacy LLDDs are setting sg_tablesize
to SG_NONE, it was preferable to override the LLDD provided value in
scsi_host_alloc().

Signed-off-by: Manoj N. Kumar <manoj@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Youngjae Lee <leeyo@xxxxxxxxxxxxxxxxxx>
---
 drivers/scsi/hosts.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index 8bb173e..bd13c9d 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -413,7 +413,7 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize)
 	shost->hostt = sht;
 	shost->this_id = sht->this_id;
 	shost->can_queue = sht->can_queue;
-	shost->sg_tablesize = sht->sg_tablesize;
+	shost->sg_tablesize = (sht->sg_tablesize ? sht->sg_tablesize : 1);
 	shost->sg_prot_tablesize = sht->sg_prot_tablesize;
 	shost->cmd_per_lun = sht->cmd_per_lun;
 	shost->unchecked_isa_dma = sht->unchecked_isa_dma;
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux