Byte 69 bits 0:1 in the IDENTIFY DEVICE data indicate a
host-aware ZAC device.
And whenever we detect a ZAC-compatible device we should
be displaying the zoned block characteristics VPD page.
Signed-off-by: Hannes Reinecke <hare@xxxxxxx>
---
drivers/ata/libata-core.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++
drivers/ata/libata-scsi.c | 33 +++++++++++++++++++++++++++++--
include/linux/ata.h | 1 +
include/linux/libata.h | 7 +++++++
4 files changed, 89 insertions(+), 2 deletions(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index db5d9f7..d8c7bbc 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -65,6 +65,7 @@
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <asm/byteorder.h>
+#include <asm/unaligned.h>
#include <linux/cdrom.h>
#include <linux/ratelimit.h>
#include <linux/pm_runtime.h>
@@ -2165,6 +2166,54 @@ static void ata_dev_config_sense_reporting(struct ata_device *dev)
}
}
+static void ata_dev_config_zac(struct ata_device *dev)
+{
+ struct ata_port *ap = dev->link->ap;
+ unsigned int err_mask;
+ u8 *identify_buf = ap->sector_buf;
+
+ dev->zac_zones_optimal_open = (u32)-1;
+ dev->zac_zones_optimal_nonseq = (u32)-1;
+ dev->zac_zones_max_open = (u32)-1;
+
+ /*
+ * Always set the 'ZAC' flag for Host-managed devices.
+ */
+ if (dev->class == ATA_DEV_ZAC)
+ dev->flags |= ATA_DFLAG_ZAC;
+ else if (ata_id_zoned_cap(dev->id) == 0x01)
+ /*
+ * Check for host-aware devices.
+ */
+ dev->flags |= ATA_DFLAG_ZAC;
+
+ if (!(dev->flags & ATA_DFLAG_ZAC))
+ return;
+
+ /*
+ * Read IDENTIFY DEVICE data log, page 9 (Zoned-device information)
+ */
+ err_mask = ata_read_log_page(dev, ATA_LOG_SATA_ID_DEV_DATA,
+ ATA_LOG_ZONED_INFORMATION,
+ identify_buf, 1);
+ if (!err_mask) {
+ u64 zoned_cap, opt_open, opt_nonseq, max_open;
+
+ zoned_cap = get_unaligned_le64(&identify_buf[8]);
+ if ((zoned_cap >> 63))
+ dev->zac_zoned_cap = (zoned_cap & 1);
+ opt_open = get_unaligned_le64(&identify_buf[24]);
+ if ((opt_open >> 63))
+ dev->zac_zones_optimal_open = (u32)opt_open;
+ opt_nonseq = get_unaligned_le64(&identify_buf[32]);
+ if ((opt_nonseq >> 63))
+ dev->zac_zones_optimal_nonseq = (u32)opt_nonseq;
+ max_open = get_unaligned_le64(&identify_buf[40]);
+ if ((max_open >> 63))
+ dev->zac_zones_max_open = (u32)max_open;
+ }
+}
+
/**
* ata_dev_configure - Configure the specified ATA/ATAPI device
* @dev: Target device to configure
@@ -2388,6 +2437,7 @@ int ata_dev_configure(struct ata_device *dev)
}
}
ata_dev_config_sense_reporting(dev);
+ ata_dev_config_zac(dev);
dev->cdb_len = 16;
}
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index a5d1e74..984cef1 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2046,6 +2046,7 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
*/
static unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf)
{
+ int num_pages;
const u8 pages[] = {
0x00, /* page 0x00, this page */
0x80, /* page 0x80, unit serial no page */
@@ -2054,10 +2055,14 @@ static unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf)
0xb0, /* page 0xb0, block limits page */
0xb1, /* page 0xb1, block device characteristics page */
0xb2, /* page 0xb2, thin provisioning page */
+ 0xb6, /* page 0xb6, zoned block device characteristics */
};
- rbuf[3] = sizeof(pages); /* number of supported VPD pages */
- memcpy(rbuf + 4, pages, sizeof(pages));
+ num_pages = sizeof(pages);
+ if (!(args->dev->flags & ATA_DFLAG_ZAC))
+ num_pages--;
+ rbuf[3] = num_pages; /* number of supported VPD pages */
+ memcpy(rbuf + 4, pages, num_pages);
return 0;
}
@@ -2245,6 +2250,24 @@ static unsigned int ata_scsiop_inq_b2(struct ata_scsi_args *args, u8 *rbuf)
return 0;
}
+static unsigned int ata_scsiop_inq_b6(struct ata_scsi_args *args, u8 *rbuf)
+{
+ /*
+ * SCSI Zoned Block device characteristics VPD page:
+ * ZBC rev 02 or later.
+ */
+ rbuf[1] = 0xb6;
+ rbuf[3] = 0x3C;
+
+ if (args->dev->zac_zoned_cap & 1)
+ rbuf[4] |= 1;
+ put_unaligned_be32(args->dev->zac_zones_optimal_open, &rbuf[8]);
+ put_unaligned_be32(args->dev->zac_zones_optimal_nonseq, &rbuf[12]);
+ put_unaligned_be32(args->dev->zac_zones_max_open, &rbuf[16]);
+
+ return 0;
+}
+
/**
* ata_scsiop_noop - Command handler that simply returns success.
* @args: device IDENTIFY data / SCSI command of interest.
@@ -3793,6 +3816,12 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd)
case 0xb2:
ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b2);
break;
+ case 0xb6:
+ if (dev->flags & ATA_DFLAG_ZAC) {
+ ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b6);
+ break;
+ }
+ /* Fallthrough */
default:
ata_scsi_invalid_field(cmd);
break;
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 2d604ca..f607bf14 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -325,6 +325,7 @@ enum {
ATA_LOG_NCQ_SEND_RECV = 0x13,
ATA_LOG_SATA_ID_DEV_DATA = 0x30,
ATA_LOG_SATA_SETTINGS = 0x08,
+ ATA_LOG_ZONED_INFORMATION = 0x09,
ATA_LOG_DEVSLP_OFFSET = 0x30,
ATA_LOG_DEVSLP_SIZE = 0x08,
ATA_LOG_DEVSLP_MDAT = 0x00,
diff --git a/include/linux/libata.h b/include/linux/libata.h
index c9cfbcd..d508cce 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -180,6 +180,7 @@ enum {
ATA_DFLAG_DA = (1 << 26), /* device supports Device Attention */
ATA_DFLAG_DEVSLP = (1 << 27), /* device supports Device Sleep */
ATA_DFLAG_ACPI_DISABLED = (1 << 28), /* ACPI for the device is disabled */
+ ATA_DFLAG_ZAC = (1 << 29), /* ZAC device */
ATA_DEV_UNKNOWN = 0, /* unknown device */
ATA_DEV_ATA = 1, /* ATA device */
@@ -724,6 +725,12 @@ struct ata_device {
/* NCQ send and receive log subcommand support */
u8 ncq_send_recv_cmds[ATA_LOG_NCQ_SEND_RECV_SIZE];
+ /* ZAC zone configuration */
+ u32 zac_zoned_cap;
+ u32 zac_zones_optimal_open;
+ u32 zac_zones_optimal_nonseq;
+ u32 zac_zones_max_open;
+
/* error history */
int spdn_cnt;
/* ering is CLEAR_END, read comment above CLEAR_END */
--
1.8.5.2
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
