Re: [PATCH 6/8] pm80xx: Add PORT RECOVERY TIMEOUT support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/29/2015 08:27 AM, Viswas.G@xxxxxxxx wrote:
> From: Viswas G <Viswas.G@xxxxxxxx>
> 
> PORT RECOVERY TIMEOUT is the maximum time between the controller's
> detection of the PHY down until the receipt of the ID_Frame (from the
> same remote SAS port). If the time expires before the ID_FRAME is
> received, the port is considered INVALID and can be removed. The
> IOP_EVENT_PORT_RECOVERY_TIMER_TMO event is reported following the
> IOP_EVENT_ PHY_DOWN event when the PHY/port does not recover after
> Port Recovery Time.
> 
> Signed-off-by: Viswas G <Viswas.G@xxxxxxxx>
> Signed-off-by: Suresh Thiagarajan <Suresh.Thiagarajan@xxxxxxxx> 
> ---
Ah. Here is the link down handling.
Maybe you should indicate this in the previous patch.

Reviewed-by: Hannes Reinecke <hare@xxxxxxxx>

Cheers,

Hannes
-- 
Dr. Hannes Reinecke		               zSeries & Storage
hare@xxxxxxx			               +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux