From: Viswas G <Viswas.G@xxxxxxxx> Thermal page code has been changed to 7 for the 12G controllers. Signed-off-by: Viswas G <Viswas.G@xxxxxxxx> Signed-off-by: Suresh Thiagarajan <Suresh.Thiagarajan@xxxxxxxx> --- drivers/scsi/pm8001/pm80xx_hwi.c | 9 ++++++++- drivers/scsi/pm8001/pm80xx_hwi.h | 3 ++- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 05cce46..dced9f7 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -843,6 +843,7 @@ pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha) int rc; u32 tag; u32 opc = OPC_INB_SET_CONTROLLER_CONFIG; + u32 page_code; memset(&payload, 0, sizeof(struct set_ctrl_cfg_req)); rc = pm8001_tag_alloc(pm8001_ha, &tag); @@ -851,8 +852,14 @@ pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha) circularQ = &pm8001_ha->inbnd_q_tbl[0]; payload.tag = cpu_to_le32(tag); + + if (IS_SPCV_12G(pm8001_ha->pdev)) + page_code = THERMAL_PAGE_CODE_7H; + else + page_code = THERMAL_PAGE_CODE_8H; + payload.cfg_pg[0] = (THERMAL_LOG_ENABLE << 9) | - (THERMAL_ENABLE << 8) | THERMAL_OP_CODE; + (THERMAL_ENABLE << 8) | page_code; payload.cfg_pg[1] = (LTEMPHIL << 24) | (RTEMPHIL << 8); rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0); diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h index 9970a38..a083cc6 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.h +++ b/drivers/scsi/pm8001/pm80xx_hwi.h @@ -177,7 +177,8 @@ /* Thermal related */ #define THERMAL_ENABLE 0x1 #define THERMAL_LOG_ENABLE 0x1 -#define THERMAL_OP_CODE 0x6 +#define THERMAL_PAGE_CODE_7H 0x6 +#define THERMAL_PAGE_CODE_8H 0x7 #define LTEMPHIL 70 #define RTEMPHIL 100 -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
