Call _init_tables before chip-specific initialization. This avoids code
duplication and fixes a bug(?) in 880 init where the values read from flash
into atpdev->sp are then overwritten by calling init_tables.
Signed-off-by: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
---
drivers/scsi/atp870u.c | 22 ++++++----------------
1 file changed, 6 insertions(+), 16 deletions(-)
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index dd0b520..3c66539 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -1298,6 +1298,12 @@ static int atp870u_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
shpnt->unique_id = shpnt->io_port;
shpnt->irq = pdev->irq;
+ err = atp870u_init_tables(shpnt);
+ if (err) {
+ dev_err(&pdev->dev, "Unable to allocate tables for Acard controller\n");
+ goto unregister;
+ }
+
if (is880(atpdev)) {
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80);//JCC082803
@@ -1366,11 +1372,6 @@ flash_ok_880:
atpdev->async[0] = ~(atpdev->async[0]);
atp_writeb_base(atpdev, 0x35, atpdev->global_map[0]);
- if (atp870u_init_tables(shpnt) < 0) {
- printk(KERN_ERR "Unable to allocate tables for Acard controller\n");
- err = -ENOMEM;
- goto unregister;
- }
k = atp_readb_base(atpdev, 0x38) & 0x80;
atp_writeb_base(atpdev, 0x38, k);
@@ -1398,11 +1399,6 @@ flash_ok_880:
atpdev->pciport[0] = shpnt->io_port + 0x40;
atpdev->pciport[1] = shpnt->io_port + 0x50;
- if (atp870u_init_tables(shpnt) < 0) {
- err = -ENOMEM;
- goto unregister;
- }
-
c = atp_readb_base(atpdev, 0x29);
atp_writeb_base(atpdev, 0x29, c | 0x04);
@@ -1533,12 +1529,6 @@ flash_ok_885:
atpdev->ultra_map[0] = 0xffff;
}
-
- if (atp870u_init_tables(shpnt) < 0) {
- err = -ENOMEM;
- goto unregister;
- }
-
if (pdev->revision > 0x07) /* check if atp876 chip then enable terminator */
atp_writeb_base(atpdev, 0x3e, 0x00);
--
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
