On 23.7.2015 15:42, Rajinikanth Pandurangan wrote: > Hello Tomas, > > Our real intention was to replace pci_enable_msix() with pci_enable_msix_range(). > In V4, I had min as 8 and max as msi_count (which could be max of 32). So range was 2 - 32. But then as you suggested to make separate patch if I wanted to set the min range different, I have created patch 11 in V5. > In patch 10 of V5, set range as (1 - 32). - I thought this would reflect our original intention. > After discussed internally, we wanted to have at least minimum of 2 MSIx, so it reflects in patch 11 of V5. In V4 you had a minimum value of 8 and because AAC_MAX_MSIX also is eight your were limiting it to exact 8, that seemed to me as a clear mistake so I pointed you to that. Your answer was that this functional change is intended (8 as minimum value instead of 2), so I asked you for a new patch for the minimum value change. In your V5 you again use the original range and thus the split to two patches makes no sense. As I already wrote, I accepted it as it is (two patches instead of one is not a big problem) If you for some reason will post a new series, please merge 10 and 11. > > Please let me know if you still think I missed something. For for future series - if you wish the upper limit to be 32 change the definition of AAC_MAX_MSIX in aacraid.h - change the description of the aac_msi option from the current description it seems that msi-x is unsupported - and and important point is - you may add the 'reviewed-by' tag only if the person actually reviewed your patch and not just commented or asked you to make some change Cheers, tomas > > Thanks, > > -----Original Message----- > From: Tomas Henzl [mailto:thenzl@xxxxxxxxxx] > Sent: Thursday, July 23, 2015 5:54 AM > To: Rajinikanth Pandurangan; jbottomley@xxxxxxxxxxxxx; linux-scsi@xxxxxxxxxxxxxxx > Cc: aacraid@xxxxxxxxxxxxxx; Harry Yang; Rich Bono; Mahesh Rajashekhara; Achim Leubner; Murthy Bhat > Subject: Re: [PATCH V5 10/11] [SCSI] aacraid: Replace pci_enable_msix() with pci_enable_msix_range() > > On 22.7.2015 18:49, rajinikanth.pandurangan@xxxxxxxx wrote: >> From: Rajinikanth Pandurangan <rajinikanth.pandurangan@xxxxxxxx> >> >> Description: >> As pci_enable_msix() deprecated, replaced with >> pci_enable_msix_range() >> >> V4 Reviewed/commented by: >> Tomas Henzl <thenzl@xxxxxxxxxx> >> >> Changes from V4: >> Changed to 1 as minimum msix range in pci_enable_msix_range() to >> match with original code. > I don't this is correct, your original code hasn't allowed a single msi-x line too, it allowed it in an exact same range <2,8> like it is now with 10+11/11 patch applied. > It looks like you have decided to not change the minimal supported value in the end, that means that not two but a single patch is preferred. If you for any reason repost your series, please merge > 10+11 into a single patch. > I can accept it in the current form too so - > > Reviewed-by: Tomas Henzl <thenzl@xxxxxxxxxx> > > Tomas > >> >> Signed-off-by: Rajinikanth Pandurangan >> <rajinikanth.pandurangan@xxxxxxxx> >> --- >> drivers/scsi/aacraid/comminit.c | 20 ++++++-------------- >> 1 file changed, 6 insertions(+), 14 deletions(-) >> >> diff --git a/drivers/scsi/aacraid/comminit.c >> b/drivers/scsi/aacraid/comminit.c index b4b6088..a02cfb3 100644 >> --- a/drivers/scsi/aacraid/comminit.c >> +++ b/drivers/scsi/aacraid/comminit.c >> @@ -338,7 +338,7 @@ static int aac_comm_init(struct aac_dev * dev) >> >> void aac_define_int_mode(struct aac_dev *dev) { >> - int i, msi_count; >> + int i, msi_count, min_msix; >> >> msi_count = i = 0; >> /* max. vectors from GET_COMM_PREFERRED_SETTINGS */ @@ -366,22 >> +366,14 @@ void aac_define_int_mode(struct aac_dev *dev) >> >> if (msi_count > 1 && >> pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) { >> - i = pci_enable_msix(dev->pdev, >> + min_msix = 1; >> + i = pci_enable_msix_range(dev->pdev, >> dev->msixentry, >> + min_msix, >> msi_count); >> - /* Check how many MSIX vectors are allocated */ >> - if (i >= 0) { >> + if (i > 0) { >> dev->msi_enabled = 1; >> - if (i) { >> - msi_count = i; >> - if (pci_enable_msix(dev->pdev, >> - dev->msixentry, >> - msi_count)) { >> - dev->msi_enabled = 0; >> - printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n", >> - dev->name, dev->id, i); >> - } >> - } >> + msi_count = i; >> } else { >> dev->msi_enabled = 0; >> printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n", >> > -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
