Re: [PATCH V4 10/10] [SCSI] aacraid: Replace pci_enable_msix() with pci_enable_msix_range()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22.7.2015 16:55, Rajinikanth Pandurangan wrote:
> Hello Tomas,
> 
> Yes, in case of failure, we'll fall into msi.
Well ok, if you want support msi-x mode only with exactly 8 msi-x
lines, that's fine...

But because it creates another functional change - (before this patch
also values lower than eight were allowed please split this patch into
two parts. One for replacing pci_enable_msix() with
pci_enable_msix_range() and the other for setting a hard limit to
8 msi-x lines.

-tm

> 
> Thanks,
> -----Original Message-----
> From: Tomas Henzl [mailto:thenzl@xxxxxxxxxx] 
> Sent: Wednesday, July 22, 2015 6:56 AM
> To: Rajinikanth Pandurangan; jbottomley@xxxxxxxxxxxxx; linux-scsi@xxxxxxxxxxxxxxx
> Cc: aacraid@xxxxxxxxxxxxxx; Harry Yang; Rich Bono; Mahesh Rajashekhara; Achim Leubner; Murthy Bhat
> Subject: Re: [PATCH V4 10/10] [SCSI] aacraid: Replace pci_enable_msix() with pci_enable_msix_range()
> 
> On 21.7.2015 19:59, rajinikanth.pandurangan@xxxxxxxx wrote:
>> From: Rajinikanth Pandurangan <rajinikanth.pandurangan@xxxxxxxx>
>>
>> Description:
>>         As pci_enable_msix() deprecated, replaced with 
>> pci_enable_msix_range()
>>
>> V3 Reviewed/commented by:
>> 	Tomas Henzl <thenzl@xxxxxxxxxx>
>>
>> Changes from V3:
>> 	Uses pci_enable_msix_range() instead of pci_enable_msix_exact() based 
>> on review comment.
>>
>> Signed-off-by: Rajinikanth Pandurangan 
>> <rajinikanth.pandurangan@xxxxxxxx>
>> ---
>>  drivers/scsi/aacraid/comminit.c | 20 ++++++--------------
>>  1 file changed, 6 insertions(+), 14 deletions(-)
>>
>> diff --git a/drivers/scsi/aacraid/comminit.c 
>> b/drivers/scsi/aacraid/comminit.c index b4b6088..3ba6e97 100644
>> --- a/drivers/scsi/aacraid/comminit.c
>> +++ b/drivers/scsi/aacraid/comminit.c
>> @@ -338,7 +338,7 @@ static int aac_comm_init(struct aac_dev * dev)
>>  
>>  void aac_define_int_mode(struct aac_dev *dev)  {
>> -	int i, msi_count;
>> +	int i, msi_count, min_msix;
>>  
>>  	msi_count = i = 0;
>>  	/* max. vectors from GET_COMM_PREFERRED_SETTINGS */ @@ -366,22 
>> +366,14 @@ void aac_define_int_mode(struct aac_dev *dev)
>>  
>>  	if (msi_count > 1 &&
>>  	    pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) {
>> -		i = pci_enable_msix(dev->pdev,
>> +		min_msix = 8;
> That^ will make the pci-enable function fail on boxes with less than eight num-online-cpus
> 
> -tm
> 
>> +		i = pci_enable_msix_range(dev->pdev,
>>  				    dev->msixentry,
>> +				    min_msix,
>>  				    msi_count);
>> -		 /* Check how many MSIX vectors are allocated */
>> -		if (i >= 0) {
>> +		if (i > 0) {
>>  			dev->msi_enabled = 1;
>> -			if (i) {
>> -				msi_count = i;
>> -				if (pci_enable_msix(dev->pdev,
>> -				    dev->msixentry,
>> -				    msi_count)) {
>> -					dev->msi_enabled = 0;
>> -					printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
>> -							dev->name, dev->id, i);
>> -				}
>> -			}
>> +			msi_count = i;
>>  		} else {
>>  			dev->msi_enabled = 0;
>>  			printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
>>
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux