[PATCH] sd: Fix maximum I/O size for BLOCK_PC requests

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Commit bcdb247c6b6a ("sd: Limit transfer length") clamped the maximum
size of an I/O request to the MAXIMUM TRANSFER LENGTH field in the BLOCK
LIMITS VPD. This had the unfortunate effect of also limiting the maximum
size of non-filesystem requests sent to the device through sg/bsg.

Avoid using blk_queue_max_hw_sectors() and set the max_sectors queue
limit directly.

Also update the comment in blk_limits_max_hw_sectors() to clarify that
max_hw_sectors defines the limit for the I/O controller only.

Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Reported-by: Brian King <brking@xxxxxxxxxxxxxxxxxx>
Tested-by: Brian King <brking@xxxxxxxxxxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx> # 3.17+
---
 block/blk-settings.c | 4 ++--
 drivers/scsi/sd.c    | 6 +++---
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/block/blk-settings.c b/block/blk-settings.c
index 12600bfffca9..e0057d035200 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -241,8 +241,8 @@ EXPORT_SYMBOL(blk_queue_bounce_limit);
  * Description:
  *    Enables a low level driver to set a hard upper limit,
  *    max_hw_sectors, on the size of requests.  max_hw_sectors is set by
- *    the device driver based upon the combined capabilities of I/O
- *    controller and storage device.
+ *    the device driver based upon the capabilities of the I/O
+ *    controller.
  *
  *    max_sectors is a soft limit imposed by the block layer for
  *    filesystem type requests.  This value can be overridden on a
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 3b2fcb4fada0..a20da8c25b4f 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2770,9 +2770,9 @@ static int sd_revalidate_disk(struct gendisk *disk)
 	max_xfer = sdkp->max_xfer_blocks;
 	max_xfer <<= ilog2(sdp->sector_size) - 9;
 
-	max_xfer = min_not_zero(queue_max_hw_sectors(sdkp->disk->queue),
-				max_xfer);
-	blk_queue_max_hw_sectors(sdkp->disk->queue, max_xfer);
+	sdkp->disk->queue->limits.max_sectors =
+		min_not_zero(queue_max_hw_sectors(sdkp->disk->queue), max_xfer);
+
 	set_capacity(disk, sdkp->capacity);
 	sd_config_write_same(sdkp);
 	kfree(buffer);
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux