Hi,
Any review comments on this patch. please let us known if any changes
are required.
Thanks,
Sreekanth
On Mon, Mar 30, 2015 at 7:25 PM, Sreekanth Reddy
<sreekanth.reddy@xxxxxxxxxxxxx> wrote:
> Driver initialization fails if driver tries to send IOC facts request message when the IOC is in reset or in a fault state.
>
> This patch will make sure that
> 1.Driver to send IOC facts request message only if HBA is in operational or ready state.
> 2.If IOC is in fault state, a diagnostic reset would be issued.
> 3.If IOC is in reset state then driver will wait for 10 seconds to exit out of reset state.
> If the HBA continues to be in reset state, then the HBA wouldn't be claimed by the driver.
>
> Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@xxxxxxxxxxxxx>
> ---
> drivers/scsi/mpt3sas/mpt3sas_base.c | 65 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 65 insertions(+)
>
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
> index c13a365..ce57320 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_base.c
> +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
> @@ -3169,6 +3169,9 @@ _base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, u32 ioc_state, int timeout,
> * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell.
> */
> static int
> +_base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag);
> +
> +static int
> _base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout,
> int sleep_flag)
> {
> @@ -3711,6 +3714,61 @@ _base_get_port_facts(struct MPT3SAS_ADAPTER *ioc, int port, int sleep_flag)
> }
>
> /**
> + * _base_wait_for_iocstate - Wait until the card is in READY or OPERATIONAL
> + * @ioc: per adapter object
> + * @timeout:
> + * @sleep_flag: CAN_SLEEP or NO_SLEEP
> + *
> + * Returns 0 for success, non-zero for failure.
> + */
> +static int
> +_base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout,
> + int sleep_flag)
> +{
> + u32 ioc_state;
> + int rc;
> +
> + dinitprintk(ioc, printk(MPT3SAS_FMT "%s\n", ioc->name,
> + __func__));
> +
> + if (ioc->pci_error_recovery)
> + return 0;
> +
> + ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
> + dhsprintk(ioc, printk(MPT3SAS_FMT "%s: ioc_state(0x%08x)\n",
> + ioc->name, __func__, ioc_state));
> +
> + if (((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY) ||
> + (ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL)
> + return 0;
> +
> + if (ioc_state & MPI2_DOORBELL_USED) {
> + dhsprintk(ioc, printk(MPT3SAS_FMT
> + "unexpected doorbell active!\n", ioc->name));
> + goto issue_diag_reset;
> + }
> +
> + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
> + mpt3sas_base_fault_info(ioc, ioc_state &
> + MPI2_DOORBELL_DATA_MASK);
> + goto issue_diag_reset;
> + }
> +
> + ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY,
> + timeout, sleep_flag);
> + if (ioc_state) {
> + dfailprintk(ioc, printk(MPT3SAS_FMT
> + "%s: failed going to ready state (ioc_state=0x%x)\n",
> + ioc->name, __func__, ioc_state));
> + return -EFAULT;
> + }
> +
> + issue_diag_reset:
> + rc = _base_diag_reset(ioc, sleep_flag);
> + return rc;
> +}
> +
> +/**
> * _base_get_ioc_facts - obtain ioc facts reply and save in ioc
> * @ioc: per adapter object
> * @sleep_flag: CAN_SLEEP or NO_SLEEP
> @@ -3728,6 +3786,13 @@ _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
> dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
> __func__));
>
> + r = _base_wait_for_iocstate(ioc, 10, sleep_flag);
> + if (r) {
> + dfailprintk(ioc, printk(MPT3SAS_FMT
> + "%s: failed getting to correct state\n",
> + ioc->name, __func__));
> + return r;
> + }
> mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t);
> mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t);
> memset(&mpi_request, 0, mpi_request_sz);
> --
> 2.0.2
>
--
Regards,
Sreekanth
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
