Hi,
Any other review comments on this patch. please let us known if any
changes are required.
Thanks,
Sreekanth
On Fri, Jun 12, 2015 at 4:46 PM, Sreekanth Reddy
<sreekanth.reddy@xxxxxxxxxxxxx> wrote:
> Thanks Johannes, we will take care of this point in our current
> on-development mpt2sas/mpt3sas merging activity.
>
>
> Thanks,
> Sreekanth
>
> On Fri, Jun 12, 2015 at 4:39 PM, Johannes Thumshirn <jthumshirn@xxxxxxx> wrote:
>> On Fri, Jun 12, 2015 at 03:12:13PM +0530, Sreekanth Reddy wrote:
>>> In this patch, increased the number of MSIX vector support for SAS3 C0 HBAs to up-to 96.
>>>
>>> Following are changes that are done in this patch
>>> 1. Support this feature only for SAS3 C0 cards and also only when reply post free queue count is greater than 8.
>>> 2. Instead of using single ReplyPostHostIndex system interface, here 12 ReplyPostHostIndex system interfaces are used. reply post free queues numbered from 0 to 7 use the first ReplyPostHostIndex system interface to update its corresponding ReplyPostHostIndex values, reply post free queues numbered from 8 to 15 will use the second ReplyPostHostIndex system interface and so on. These 12 ReplyPostHostIndex system interfaces address are saved in the array replyPostRegisterIndex[].
>>> 3. Update the ReplyPostHostIndex value of corresponding reply post free queue in the (its msix_index/8)th entry of replyPostRegisterIndex[] array after processing the reply post descriptor.
>>>
>>> Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@xxxxxxxxxxxxx>
>>> ---
>>> drivers/scsi/mpt3sas/mpt3sas_base.c | 70 +++++++++++++++++++++++++++++++++----
>>> drivers/scsi/mpt3sas/mpt3sas_base.h | 7 +++-
>>> 2 files changed, 69 insertions(+), 8 deletions(-)
>>>
>>> diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
>>> index 14a781b..c13a365 100644
>>> --- a/drivers/scsi/mpt3sas/mpt3sas_base.c
>>> +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
>>> @@ -83,7 +83,7 @@ static int msix_disable = -1;
>>> module_param(msix_disable, int, 0);
>>> MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)");
>>>
>>> -static int max_msix_vectors = 8;
>>> +static int max_msix_vectors = -1;
>>> module_param(max_msix_vectors, int, 0);
>>> MODULE_PARM_DESC(max_msix_vectors,
>>> " max msix vectors - (default=8)");
>>
>> When changing the default value, please also update the description reflecting
>> this change.
>>
>>> @@ -1009,8 +1009,15 @@ _base_interrupt(int irq, void *bus_id)
>>> }
>>>
>>> wmb();
>>> - writel(reply_q->reply_post_host_index | (msix_index <<
>>> - MPI2_RPHI_MSIX_INDEX_SHIFT), &ioc->chip->ReplyPostHostIndex);
>>> + if (ioc->msix96_vector) {
>>> + writel(reply_q->reply_post_host_index | ((msix_index & 7) <<
>>> + MPI2_RPHI_MSIX_INDEX_SHIFT),
>>> + ioc->replyPostRegisterIndex[msix_index/8]);
>>> + } else {
>>> + writel(reply_q->reply_post_host_index | (msix_index <<
>>> + MPI2_RPHI_MSIX_INDEX_SHIFT),
>>> + &ioc->chip->ReplyPostHostIndex);
>>> + }
>>> atomic_dec(&reply_q->busy);
>>> return IRQ_HANDLED;
>>> }
>>> @@ -1560,8 +1567,6 @@ _base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc)
>>>
>>> pci_read_config_word(ioc->pdev, base + 2, &message_control);
>>> ioc->msix_vector_count = (message_control & 0x3FF) + 1;
>>> - if (ioc->msix_vector_count > 8)
>>> - ioc->msix_vector_count = 8;
>>> dinitprintk(ioc, pr_info(MPT3SAS_FMT
>>> "msix is supported, vector_count(%d)\n",
>>> ioc->name, ioc->msix_vector_count));
>>> @@ -1880,6 +1885,31 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
>>> if (r)
>>> goto out_fail;
>>>
>>> + /* Use the Combined reply queue feature only for SAS3 C0 HBAs and
>>> + * also only when reply queue count is greater than 8
>>> + */
>>> + if (ioc->msix96_vector && ioc->reply_queue_count > 8) {
>>> + /* If this is an 96 vector supported device,
>>> + set up ReplyPostIndex addresses */
>>> + ioc->replyPostRegisterIndex = kcalloc(12,
>>> + sizeof(resource_size_t *), GFP_KERNEL);
>>> + if (!ioc->replyPostRegisterIndex) {
>>> + dfailprintk(ioc, printk(MPT3SAS_FMT
>>> + "allocation for reply Post Register Index failed!!!\n",
>>> + ioc->name));
>>> + r = -ENOMEM;
>>> + goto out_fail;
>>> + }
>>> +
>>> + for (i = 0; i < 12; i++) {
>>> + ioc->replyPostRegisterIndex[i] = (resource_size_t *)
>>> + ((u8 *)&ioc->chip->Doorbell +
>>> + MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET +
>>> + (i * 0x10));
>>> + }
>>> + } else
>>> + ioc->msix96_vector = 0;
>>> +
>>> list_for_each_entry(reply_q, &ioc->reply_queue_list, list)
>>> pr_info(MPT3SAS_FMT "%s: IRQ %d\n",
>>> reply_q->name, ((ioc->msix_enable) ? "PCI-MSI-X enabled" :
>>> @@ -1901,6 +1931,8 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
>>> pci_release_selected_regions(ioc->pdev, ioc->bars);
>>> pci_disable_pcie_error_reporting(pdev);
>>> pci_disable_device(pdev);
>>> + if (ioc->msix96_vector)
>>> + kfree(ioc->replyPostRegisterIndex);
>>> return r;
>>> }
>>>
>>> @@ -4522,8 +4554,16 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
>>>
>>> /* initialize reply post host index */
>>> list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
>>> - writel(reply_q->msix_index << MPI2_RPHI_MSIX_INDEX_SHIFT,
>>> - &ioc->chip->ReplyPostHostIndex);
>>> + if (ioc->msix96_vector) {
>>> + writel((reply_q->msix_index & 7)<<
>>> + MPI2_RPHI_MSIX_INDEX_SHIFT,
>>> + ioc->replyPostRegisterIndex[reply_q->msix_index/8]);
>>> + } else {
>>> + writel(reply_q->msix_index <<
>>> + MPI2_RPHI_MSIX_INDEX_SHIFT,
>>> + &ioc->chip->ReplyPostHostIndex);
>>> + }
>>> +
>>> if (!_base_is_controller_msix_enabled(ioc))
>>> goto skip_init_reply_post_host_index;
>>> }
>>> @@ -4577,6 +4617,9 @@ mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc)
>>> _base_free_irq(ioc);
>>> _base_disable_msix(ioc);
>>>
>>> + if (ioc->msix96_vector)
>>> + kfree(ioc->replyPostRegisterIndex);
>>> +
>>> if (ioc->chip_phys && ioc->chip)
>>> iounmap(ioc->chip);
>>> ioc->chip_phys = 0;
>>> @@ -4600,6 +4643,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
>>> {
>>> int r, i;
>>> int cpu_id, last_cpu_id = 0;
>>> + u8 revision;
>>>
>>> dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
>>> __func__));
>>> @@ -4618,6 +4662,18 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
>>> r = -ENOMEM;
>>> goto out_free_resources;
>>> }
>>> + /* Check whether the controller revision is C0 or above.
>>> + C0 and above revision controllers support 96 vectors */
>>> + revision = ioc->pdev->revision;
>>> +
>>> + if ((ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3004 ||
>>> + ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3008 ||
>>> + ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_1 ||
>>> + ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_2 ||
>>> + ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_5 ||
>>> + ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_6) &&
>>> + (revision >= 0x02))
>>> + ioc->msix96_vector = 1;
>>>
>>> ioc->rdpq_array_enable_assigned = 0;
>>> ioc->dma_mask = 0;
>>> diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
>>> index afa8816..6b8d8f1 100644
>>> --- a/drivers/scsi/mpt3sas/mpt3sas_base.h
>>> +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
>>> @@ -728,7 +728,8 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
>>> * is assigned only ones
>>> * @reply_queue_count: number of reply queue's
>>> * @reply_queue_list: link list contaning the reply queue info
>>> - * @reply_post_host_index: head index in the pool where FW completes IO
>>> + * @msix96_vector: 96 MSI-X vector support
>>> + * @replyPostRegisterIndex: index of next position in Reply Desc Post Queue
>>> * @delayed_tr_list: target reset link list
>>> * @delayed_tr_volume_list: volume target reset link list
>>> * @@temp_sensors_count: flag to carry the number of temperature sensors
>>> @@ -937,6 +938,10 @@ struct MPT3SAS_ADAPTER {
>>> u8 reply_queue_count;
>>> struct list_head reply_queue_list;
>>>
>>> + u8 msix96_vector;
>>> + /* reply post register index */
>>> + resource_size_t **replyPostRegisterIndex;
>>> +
>>
>> I know there are many uses of mixed-case varibles in this driver and changing
>> them when they're already in makes no sense, but maybe you could consider
>> getting rid of them in your mpt2sas/mpt3sas merge, as it is not really a
>> commonly seen pattern in the linux kernel.
>>
>>> struct list_head delayed_tr_list;
>>> struct list_head delayed_tr_volume_list;
>>> u8 temp_sensors_count;
>>> --
>>> 2.0.2
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>> --
>> Johannes Thumshirn Storage
>> jthumshirn@xxxxxxx +49 911 74053 689
>> SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
>> GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
>> HRB 21284 (AG Nürnberg)
>
>
>
> --
>
> Regards,
> Sreekanth
--
Regards,
Sreekanth
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
