Some UFS host controllers may only allow accessing the peer DME attribute
in AUTO mode (FAST AUTO or SLOW AUTO) hence we had added a quirk for
switching to AUTO power mode before accessing the peer DME attribute.
Signed-off-by: Yaniv Gardi <ygardi@xxxxxxxxxxxxxx>
---
drivers/scsi/ufs/ufshcd.c | 31 +++++++++++++++++++++++++++++++
drivers/scsi/ufs/ufshcd.h | 7 +++++++
2 files changed, 38 insertions(+)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index a274df9..014f1c0 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -188,6 +188,8 @@ static int ufshcd_host_reset_and_restore(struct ufs_hba *hba);
static irqreturn_t ufshcd_intr(int irq, void *__hba);
static int ufshcd_config_pwr_mode(struct ufs_hba *hba,
struct ufs_pa_layer_attr *desired_pwr_mode);
+static int ufshcd_change_power_mode(struct ufs_hba *hba,
+ struct ufs_pa_layer_attr *pwr_mode);
static inline int ufshcd_enable_irq(struct ufs_hba *hba)
{
@@ -2156,6 +2158,31 @@ int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
};
const char *get = action[!!peer];
int ret;
+ struct ufs_pa_layer_attr orig_pwr_info;
+ struct ufs_pa_layer_attr temp_pwr_info;
+ bool pwr_mode_change = false;
+
+ if (peer && (hba->quirks & UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE)) {
+ orig_pwr_info = hba->pwr_info;
+ temp_pwr_info = orig_pwr_info;
+
+ if (orig_pwr_info.pwr_tx == FAST_MODE ||
+ orig_pwr_info.pwr_rx == FAST_MODE) {
+ temp_pwr_info.pwr_tx = FASTAUTO_MODE;
+ temp_pwr_info.pwr_rx = FASTAUTO_MODE;
+ pwr_mode_change = true;
+ } else if (orig_pwr_info.pwr_tx == SLOW_MODE ||
+ orig_pwr_info.pwr_rx == SLOW_MODE) {
+ temp_pwr_info.pwr_tx = SLOWAUTO_MODE;
+ temp_pwr_info.pwr_rx = SLOWAUTO_MODE;
+ pwr_mode_change = true;
+ }
+ if (pwr_mode_change) {
+ ret = ufshcd_change_power_mode(hba, &temp_pwr_info);
+ if (ret)
+ goto out;
+ }
+ }
uic_cmd.command = peer ?
UIC_CMD_DME_PEER_GET : UIC_CMD_DME_GET;
@@ -2170,6 +2197,10 @@ int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
if (mib_val)
*mib_val = uic_cmd.argument3;
+
+ if (peer && (hba->quirks & UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE)
+ && pwr_mode_change)
+ ufshcd_change_power_mode(hba, &orig_pwr_info);
out:
return ret;
}
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 8636ec9..eb6831d 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -442,6 +442,13 @@ struct ufs_hba {
*/
#define UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP UFS_BIT(3)
+ /*
+ * This quirk needs to be enabled if the host contoller only allows
+ * accessing the peer dme attributes in AUTO mode (FAST AUTO or
+ * SLOW AUTO).
+ */
+ #define UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE UFS_BIT(4)
+
unsigned int quirks; /* Deviations from standard UFSHCI spec. */
wait_queue_head_t tm_wq;
--
1.8.5.2
--
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
