Our detection logic to avoid doing UAS on ASM1051 bridge chips causes problems
with newer ASM1153 disk enclosures in 2 ways:
1) Some ASM1153 disk enclosures re-use the ASM1051 device-id of 5106, which
we assume is always an ASM1051, so remove the quirk for 5106, and instead
use the same detection logic as we already use for device-id 55aa, which is
used for all of ASM1051, ASM1053 and ASM1153 devices <sigh>.
2) Our detection logic to differentiate between ASM1051 and ASM1053 sees
ASM1153 devices as ASM1051 because they have 32 streams like ASM1051 devs.
Luckily the ASM1153 descriptors are not 100% identical, unlike the previous
models the ASM1153 has bMaxPower == 0, so use that to differentiate it.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/usb/storage/uas-detect.h | 33 ++++++++++++++++++++++++++++-----
drivers/usb/storage/unusual_uas.h | 8 --------
2 files changed, 28 insertions(+), 13 deletions(-)
diff --git a/drivers/usb/storage/uas-detect.h b/drivers/usb/storage/uas-detect.h
index 8a6f371..9893d69 100644
--- a/drivers/usb/storage/uas-detect.h
+++ b/drivers/usb/storage/uas-detect.h
@@ -69,16 +69,39 @@ static int uas_use_uas_driver(struct usb_interface *intf,
return 0;
/*
- * ASM1051 and older ASM1053 devices have the same usb-id, and UAS is
- * broken on the ASM1051, use the number of streams to differentiate.
- * New ASM1053-s also support 32 streams, but have a different prod-id.
+ * ASMedia has a number of usb3 to sata bridge chips, at the time of
+ * this writing the following versions exist:
+ * ASM1051 - no uas support version
+ * ASM1051 - with broken (*) uas support
+ * ASM1053 - with working uas support
+ * ASM1153 - with working uas support
+ *
+ * Devices with these chips re-use a number of device-ids over the
+ * entire line, so the device-id is useless to determine if we're
+ * dealing with an ASM1051 (which we want to avoid).
+ *
+ * The ASM1153 can be identified by config.MaxPower == 0,
+ * where as the ASM105x models have config.MaxPower == 36.
+ *
+ * Differentiating between the ASM1053 and ASM1051 is trickier, when
+ * connected over USB-3 we can look at the number of streams supported,
+ * ASM1051 supports 32 streams, where as early ASM1053 versions support
+ * 16 streams, newer ASM1053-s also support 32 streams, but have a
+ * different prod-id.
+ *
+ * (*) ASM1051 chips do work with UAS with some disks (with the
+ * US_FL_NO_REPORT_OPCODES quirk), but are broken with other disks
*/
if (le16_to_cpu(udev->descriptor.idVendor) == 0x174c &&
- le16_to_cpu(udev->descriptor.idProduct) == 0x55aa) {
- if (udev->speed < USB_SPEED_SUPER) {
+ (le16_to_cpu(udev->descriptor.idProduct) == 0x5106 ||
+ le16_to_cpu(udev->descriptor.idProduct) == 0x55aa)) {
+ if (udev->actconfig->desc.bMaxPower == 0) {
+ /* ASM1153, do nothing */
+ } else if (udev->speed < USB_SPEED_SUPER) {
/* No streams info, assume ASM1051 */
flags |= US_FL_IGNORE_UAS;
} else if (usb_ss_max_streams(&eps[1]->ss_ep_comp) == 32) {
+ /* Possibly an ASM1051, disable uas */
flags |= US_FL_IGNORE_UAS;
}
}
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index 2f0a3d3..f8492c1 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -96,14 +96,6 @@ UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x9999,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_REPORT_OPCODES),
-/* Most ASM1051 based devices have issues with uas, blacklist them all */
-/* Reported-by: Hans de Goede <hdegoede@xxxxxxxxxx> */
-UNUSUAL_DEV(0x174c, 0x5106, 0x0000, 0x9999,
- "ASMedia",
- "ASM1051",
- USB_SC_DEVICE, USB_PR_DEVICE, NULL,
- US_FL_IGNORE_UAS),
-
/* Reported-by: Hans de Goede <hdegoede@xxxxxxxxxx> */
UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999,
"VIA",
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
