On Jan 7, 2015, at 9:43 AM, Yaniv Gardi <ygardi@xxxxxxxxxxxxxxxx> wrote:
> This change adds a support for a 20nm qcom-ufs phy that is
> required in platforms that use ufs-qcom controller.
>
> Signed-off-by: Yaniv Gardi <ygardi@xxxxxxxxxxxxxx>
>
> ---
> drivers/phy/Makefile | 2 +
> drivers/phy/phy-qcom-ufs-i.h | 167 ++++++++
Curious, if the ‘-i’ in name means anything, or if we could just call this phy-qcom-ufs.h
> drivers/phy/phy-qcom-ufs-qmp-20nm.c | 257 +++++++++++++
> drivers/phy/phy-qcom-ufs-qmp-20nm.h | 235 ++++++++++++
> drivers/phy/phy-qcom-ufs.c | 745 ++++++++++++++++++++++++++++++++++++
> include/linux/phy/phy-qcom-ufs.h | 33 ++
> 6 files changed, 1439 insertions(+)
> create mode 100644 drivers/phy/phy-qcom-ufs-i.h
> create mode 100644 drivers/phy/phy-qcom-ufs-qmp-20nm.c
> create mode 100644 drivers/phy/phy-qcom-ufs-qmp-20nm.h
> create mode 100644 drivers/phy/phy-qcom-ufs.c
> create mode 100644 include/linux/phy/phy-qcom-ufs.h
>
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index aa74f96..ba94e85 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -34,3 +34,5 @@ obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
> obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
> obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o
> obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o
> +obj-$(CONFIG_SCSI_UFS_QCOM) += phy-qcom-ufs.o
> +obj-$(CONFIG_SCSI_UFS_QCOM) += phy-qcom-ufs-qmp-20nm.o
> diff --git a/drivers/phy/phy-qcom-ufs-i.h b/drivers/phy/phy-qcom-ufs-i.h
> new file mode 100644
> index 0000000..50f1fdc
> --- /dev/null
> +++ b/drivers/phy/phy-qcom-ufs-i.h
> @@ -0,0 +1,167 @@
> +/*
> + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef UFS_QCOM_PHY_I_H_
> +#define UFS_QCOM_PHY_I_H_
> +
> +#include <linux/module.h>
> +#include <linux/clk.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/slab.h>
> +
> +#include <linux/phy/phy-qcom-ufs.h>
> +#include <linux/platform_device.h>
> +#include <linux/io.h>
> +#include <linux/delay.h>
> +
> +#define readl_poll_timeout(addr, val, cond, sleep_us, timeout_us) \
> +({ \
> + ktime_t timeout = ktime_add_us(ktime_get(), timeout_us); \
> + might_sleep_if(timeout_us); \
> + for (;;) { \
> + (val) = readl(addr); \
> + if (cond) \
> + break; \
> + if (timeout_us && ktime_compare(ktime_get(), timeout) > 0) { \
> + (val) = readl(addr); \
> + break; \
> + } \
> + if (sleep_us) \
> + usleep_range(DIV_ROUND_UP(sleep_us, 4), sleep_us); \
> + } \
> + (cond) ? 0 : -ETIMEDOUT; \
> +})
We have a version of this in drivers/phy/phy-qcom-apq8064-sata.c, can we pull them out into something like include/asm-generic/io.h
> +
> +#define UFS_QCOM_PHY_CAL_ENTRY(reg, val) \
> + { \
> + .reg_offset = reg, \
> + .cfg_value = val, \
> + }
> +
> +#define UFS_QCOM_PHY_NAME_LEN 30
> +
> +enum {
> + MASK_SERDES_START = 0x1,
> + MASK_PCS_READY = 0x1,
> +};
> +
> +enum {
> + OFFSET_SERDES_START = 0x0,
> +};
Any reason these aren’t #defines?
> +
> +struct ufs_qcom_phy_stored_attributes {
> + u32 att;
> + u32 value;
> +};
> +
> +struct ufs_qcom_phy_calibration {
> + u32 reg_offset;
> + u32 cfg_value;
> +};
> +
> +struct ufs_qcom_phy_vreg {
> + const char *name;
> + struct regulator *reg;
> + int max_uA;
> + int min_uV;
> + int max_uV;
> + bool enabled;
> + bool is_always_on;
> +};
> +
> +struct ufs_qcom_phy {
> + struct list_head list;
> + struct device *dev;
> + void __iomem *mmio;
> + void __iomem *dev_ref_clk_ctrl_mmio;
> + struct clk *tx_iface_clk;
> + struct clk *rx_iface_clk;
> + bool is_iface_clk_enabled;
> + struct clk *ref_clk_src;
> + struct clk *ref_clk_parent;
> + struct clk *ref_clk;
> + bool is_ref_clk_enabled;
> + bool is_dev_ref_clk_enabled;
> + struct ufs_qcom_phy_vreg vdda_pll;
> + struct ufs_qcom_phy_vreg vdda_phy;
> + struct ufs_qcom_phy_vreg vddp_ref_clk;
> + unsigned int quirks;
> + u8 host_ctrl_rev_major;
> + u16 host_ctrl_rev_minor;
> + u16 host_ctrl_rev_step;
> +
> + /*
> + * If UFS PHY power down is deasserted and power is restored to analog
> + * circuits, the rx_sigdet can glitch. If the glitch is wide enough,
> + * it can trigger the digital logic to think it saw a DIF-N and cause
> + * it to exit Hibern8. Disabling the rx_sigdet during power-up masks
> + * the glitch.
> + */
> + #define UFS_QCOM_PHY_DIS_SIGDET_BEFORE_PWR_COLLAPSE (1 << 0)
> +
Where is this used? is it a QUIRK, if so probably having _QUIRK_ in the name would be good.
> + /*
> + * If UFS link is put into Hibern8 and if UFS PHY analog hardware is
> + * power collapsed (by clearing UFS_PHY_POWER_DOWN_CONTROL), Hibern8
> + * exit might fail even after powering on UFS PHY analog hardware.
> + * Enabling this quirk will help to solve above issue by doing
> + * custom PHY settings just before PHY analog power collapse.
> + */
> + #define UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE (1 << 1)
> +
Any reason not to either put this right after quirks above, or pull it out of the struct define, and keep it right after?
> + char name[UFS_QCOM_PHY_NAME_LEN];
> + struct ufs_qcom_phy_calibration *cached_regs;
> + int cached_regs_table_size;
> + bool is_powered_on;
> + struct ufs_qcom_phy_specific_ops *phy_spec_ops;
> +};
> +
> +/**
> + * struct ufs_qcom_phy_specific_ops - set of pointers to functions which have a
> + * specific implementation per phy. Each UFS phy, should implement
> + * those functions according to its spec and requirements
> + * @calibrate_phy: pointer to a function that calibrate the phy
> + * @start_serdes: pointer to a function that starts the serdes
> + * @is_physical_coding_sublayer_ready: pointer to a function that
> + * checks pcs readiness
What is the expected return values here? 0 means ready, non-zero error?
> + * @set_tx_lane_enable: pointer to a function that enable tx lanes
> + * @power_control: pointer to a function that controls analog rail of phy
> + * and writes to QSERDES_RX_SIGDET_CNTRL attribute
> + */
> +struct ufs_qcom_phy_specific_ops {
> + int (*calibrate_phy)(struct ufs_qcom_phy *phy, bool is_rate_B);
> + void (*start_serdes)(struct ufs_qcom_phy *phy);
> + int (*is_physical_coding_sublayer_ready)(struct ufs_qcom_phy *phy);
> + void (*set_tx_lane_enable)(struct ufs_qcom_phy *phy, u32 val);
> + void (*power_control)(struct ufs_qcom_phy *phy, bool val);
> +};
> +
> +struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy);
> +int ufs_qcom_phy_power_on(struct phy *generic_phy);
> +int ufs_qcom_phy_power_off(struct phy *generic_phy);
> +int ufs_qcom_phy_exit(struct phy *generic_phy);
Any reasons these need to be exported, and not just kept static? I assume these are called via the generic PHY ops.
> +int ufs_qcom_phy_init_clks(struct phy *generic_phy,
> + struct ufs_qcom_phy *phy_common);
> +int ufs_qcom_phy_init_vregulators(struct phy *generic_phy,
> + struct ufs_qcom_phy *phy_common);
> +int ufs_qcom_phy_remove(struct phy *generic_phy,
> + struct ufs_qcom_phy *ufs_qcom_phy);
> +struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev,
> + struct ufs_qcom_phy *common_cfg,
> + struct phy_ops *ufs_qcom_phy_gen_ops,
> + struct ufs_qcom_phy_specific_ops *phy_spec_ops);
> +int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
> + struct ufs_qcom_phy_calibration *tbl_A, int tbl_size_A,
> + struct ufs_qcom_phy_calibration *tbl_B, int tbl_size_B,
> + bool is_rate_B);
> +#endif
> diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/phy-qcom-ufs-qmp-20nm.c
> new file mode 100644
> index 0000000..8332f96
> --- /dev/null
> +++ b/drivers/phy/phy-qcom-ufs-qmp-20nm.c
> @@ -0,0 +1,257 @@
> +/*
> + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include "phy-qcom-ufs-qmp-20nm.h"
> +
> +#define UFS_PHY_NAME "ufs_phy_qmp_20nm"
> +
> +static
> +int ufs_qcom_phy_qmp_20nm_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
> + bool is_rate_B)
> +{
> + struct ufs_qcom_phy_calibration *tbl_A, *tbl_B;
> + int tbl_size_A, tbl_size_B;
> + u8 major = ufs_qcom_phy->host_ctrl_rev_major;
> + u16 minor = ufs_qcom_phy->host_ctrl_rev_minor;
> + u16 step = ufs_qcom_phy->host_ctrl_rev_step;
> + int err;
> +
> + if ((major == 0x1) && (minor == 0x002) && (step == 0x0000)) {
> + tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A_1_2_0);
> + tbl_A = phy_cal_table_rate_A_1_2_0;
> + } else if ((major == 0x1) && (minor == 0x003) && (step == 0x0000)) {
> + tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A_1_3_0);
> + tbl_A = phy_cal_table_rate_A_1_3_0;
> + } else {
> + dev_err(ufs_qcom_phy->dev, "%s: Unknown UFS-PHY version, no calibration values\n",
> + __func__);
> + err = -ENODEV;
> + goto out;
> + }
> +
> + tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B);
> + tbl_B = phy_cal_table_rate_B;
> +
> + err = ufs_qcom_phy_calibrate(ufs_qcom_phy, tbl_A, tbl_size_A,
> + tbl_B, tbl_size_B, is_rate_B);
> +
> + if (err)
> + dev_err(ufs_qcom_phy->dev, "%s: ufs_qcom_phy_calibrate() failed %d\n",
> + __func__, err);
> +
> +out:
> + return err;
> +}
> +
> +static
> +void ufs_qcom_phy_qmp_20nm_advertise_quirks(struct ufs_qcom_phy *phy_common)
> +{
> + phy_common->quirks =
> + UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
> +}
> +
> +static int ufs_qcom_phy_qmp_20nm_init(struct phy *generic_phy)
> +{
> + struct ufs_qcom_phy_qmp_20nm *phy = phy_get_drvdata(generic_phy);
> + struct ufs_qcom_phy *phy_common = &phy->common_cfg;
> + int err = 0;
> +
> + err = ufs_qcom_phy_init_clks(generic_phy, phy_common);
> + if (err) {
> + dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_clks() failed %d\n",
> + __func__, err);
> + goto out;
> + }
> +
> + err = ufs_qcom_phy_init_vregulators(generic_phy, phy_common);
> + if (err) {
> + dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_vregulators() failed %d\n",
> + __func__, err);
> + goto out;
> + }
> +
> + ufs_qcom_phy_qmp_20nm_advertise_quirks(phy_common);
> +
> +out:
> + return err;
> +}
> +
> +static
> +void ufs_qcom_phy_qmp_20nm_power_control(struct ufs_qcom_phy *phy, bool val)
> +{
> + bool hibern8_exit_after_pwr_collapse = phy->quirks &
> + UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
> +
> + if (val) {
> + writel_relaxed(0x1, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
> + /*
> + * Before any transactions involving PHY, ensure PHY knows
> + * that it's analog rail is powered ON.
> + */
> + mb();
> +
> + if (hibern8_exit_after_pwr_collapse) {
> + /*
> + * Give atleast 1us delay after restoring PHY analog
> + * power.
> + */
> + usleep_range(1, 2);
> + writel_relaxed(0x0A, phy->mmio +
> + QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
> + writel_relaxed(0x08, phy->mmio +
> + QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
> + /*
> + * Make sure workaround is deactivated before proceeding
> + * with normal PHY operations.
> + */
> + mb();
> + }
> + } else {
> + if (hibern8_exit_after_pwr_collapse) {
> + writel_relaxed(0x0A, phy->mmio +
> + QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
> + writel_relaxed(0x02, phy->mmio +
> + QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
> + /*
> + * Make sure that above workaround is activated before
> + * PHY analog power collapse.
> + */
> + mb();
> + }
> +
> + writel_relaxed(0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
> + /*
> + * ensure that PHY knows its PHY analog rail is going
> + * to be powered down
> + */
> + mb();
> + }
> +}
> +
> +static
> +void ufs_qcom_phy_qmp_20nm_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val)
> +{
> + writel_relaxed(val & UFS_PHY_TX_LANE_ENABLE_MASK,
> + phy->mmio + UFS_PHY_TX_LANE_ENABLE);
> + mb();
> +}
> +
> +static inline void ufs_qcom_phy_qmp_20nm_start_serdes(struct ufs_qcom_phy *phy)
> +{
> + u32 tmp;
> +
> + tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START);
> + tmp &= ~MASK_SERDES_START;
> + tmp |= (1 << OFFSET_SERDES_START);
> + writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START);
> + mb();
> +}
> +
> +static int ufs_qcom_phy_qmp_20nm_is_pcs_ready(struct ufs_qcom_phy *phy_common)
> +{
> + int err = 0;
> + u32 val;
> +
> + err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS,
> + val, (val & MASK_PCS_READY), 10, 1000000);
> + if (err)
> + dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n",
> + __func__, err);
> + return err;
> +}
> +
> +static struct phy_ops ufs_qcom_phy_qmp_20nm_phy_ops = {
> + .init = ufs_qcom_phy_qmp_20nm_init,
> + .exit = ufs_qcom_phy_exit,
> + .power_on = ufs_qcom_phy_power_on,
> + .power_off = ufs_qcom_phy_power_off,
> + .owner = THIS_MODULE,
> +};
> +
> +static struct ufs_qcom_phy_specific_ops phy_20nm_ops = {
> + .calibrate_phy = ufs_qcom_phy_qmp_20nm_phy_calibrate,
> + .start_serdes = ufs_qcom_phy_qmp_20nm_start_serdes,
> + .is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_20nm_is_pcs_ready,
> + .set_tx_lane_enable = ufs_qcom_phy_qmp_20nm_set_tx_lane_enable,
> + .power_control = ufs_qcom_phy_qmp_20nm_power_control,
> +};
> +
> +static int ufs_qcom_phy_qmp_20nm_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct phy *generic_phy;
> + struct ufs_qcom_phy_qmp_20nm *phy;
> + int err = 0;
> +
> + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
> + if (!phy) {
> + dev_err(dev, "%s: failed to allocate phy\n", __func__);
> + err = -ENOMEM;
> + goto out;
> + }
> +
> + generic_phy = ufs_qcom_phy_generic_probe(pdev, &phy->common_cfg,
> + &ufs_qcom_phy_qmp_20nm_phy_ops, &phy_20nm_ops);
> +
> + if (!generic_phy) {
> + dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n",
> + __func__);
> + err = -EIO;
> + goto out;
> + }
> +
> + phy_set_drvdata(generic_phy, phy);
> +
> + strlcpy(phy->common_cfg.name, UFS_PHY_NAME,
> + sizeof(phy->common_cfg.name));
> +
> +out:
> + return err;
> +}
> +
> +static int ufs_qcom_phy_qmp_20nm_remove(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct phy *generic_phy = to_phy(dev);
> + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
> + int err = 0;
> +
> + err = ufs_qcom_phy_remove(generic_phy, ufs_qcom_phy);
> + if (err)
> + dev_err(dev, "%s: ufs_qcom_phy_remove failed = %d\n",
> + __func__, err);
> +
> + return err;
> +}
> +
> +static const struct of_device_id ufs_qcom_phy_qmp_20nm_of_match[] = {
> + {.compatible = "qcom,ufs-phy-qmp-20nm"},
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_20nm_of_match);
> +
> +static struct platform_driver ufs_qcom_phy_qmp_20nm_driver = {
> + .probe = ufs_qcom_phy_qmp_20nm_probe,
> + .remove = ufs_qcom_phy_qmp_20nm_remove,
> + .driver = {
> + .of_match_table = ufs_qcom_phy_qmp_20nm_of_match,
> + .name = "ufs_qcom_phy_qmp_20nm",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +module_platform_driver(ufs_qcom_phy_qmp_20nm_driver);
> +
> +MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 20nm");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.h b/drivers/phy/phy-qcom-ufs-qmp-20nm.h
> new file mode 100644
> index 0000000..4f3076b
> --- /dev/null
> +++ b/drivers/phy/phy-qcom-ufs-qmp-20nm.h
> @@ -0,0 +1,235 @@
> +/*
> + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef UFS_QCOM_PHY_QMP_20NM_H_
> +#define UFS_QCOM_PHY_QMP_20NM_H_
> +
> +#include "phy-qcom-ufs-i.h"
> +
> +/* QCOM UFS PHY control registers */
> +
> +#define COM_OFF(x) (0x000 + x)
> +#define PHY_OFF(x) (0xC00 + x)
> +#define TX_OFF(n, x) (0x400 + (0x400 * n) + x)
> +#define RX_OFF(n, x) (0x600 + (0x400 * n) + x)
> +
> +/* UFS PHY PLL block registers */
> +#define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x0)
> +#define QSERDES_COM_PLL_VCOTAIL_EN COM_OFF(0x04)
> +#define QSERDES_COM_PLL_CNTRL COM_OFF(0x14)
> +#define QSERDES_COM_PLL_IP_SETI COM_OFF(0x24)
> +#define QSERDES_COM_CORE_CLK_IN_SYNC_SEL COM_OFF(0x28)
> +#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x30)
> +#define QSERDES_COM_PLL_CP_SETI COM_OFF(0x34)
> +#define QSERDES_COM_PLL_IP_SETP COM_OFF(0x38)
> +#define QSERDES_COM_PLL_CP_SETP COM_OFF(0x3C)
> +#define QSERDES_COM_SYSCLK_EN_SEL_TXBAND COM_OFF(0x48)
> +#define QSERDES_COM_RESETSM_CNTRL COM_OFF(0x4C)
> +#define QSERDES_COM_RESETSM_CNTRL2 COM_OFF(0x50)
> +#define QSERDES_COM_PLLLOCK_CMP1 COM_OFF(0x90)
> +#define QSERDES_COM_PLLLOCK_CMP2 COM_OFF(0x94)
> +#define QSERDES_COM_PLLLOCK_CMP3 COM_OFF(0x98)
> +#define QSERDES_COM_PLLLOCK_CMP_EN COM_OFF(0x9C)
> +#define QSERDES_COM_BGTC COM_OFF(0xA0)
> +#define QSERDES_COM_DEC_START1 COM_OFF(0xAC)
> +#define QSERDES_COM_PLL_AMP_OS COM_OFF(0xB0)
> +#define QSERDES_COM_RES_CODE_UP_OFFSET COM_OFF(0xD8)
> +#define QSERDES_COM_RES_CODE_DN_OFFSET COM_OFF(0xDC)
> +#define QSERDES_COM_DIV_FRAC_START1 COM_OFF(0x100)
> +#define QSERDES_COM_DIV_FRAC_START2 COM_OFF(0x104)
> +#define QSERDES_COM_DIV_FRAC_START3 COM_OFF(0x108)
> +#define QSERDES_COM_DEC_START2 COM_OFF(0x10C)
> +#define QSERDES_COM_PLL_RXTXEPCLK_EN COM_OFF(0x110)
> +#define QSERDES_COM_PLL_CRCTRL COM_OFF(0x114)
> +#define QSERDES_COM_PLL_CLKEPDIV COM_OFF(0x118)
> +
> +/* TX LANE n (0, 1) registers */
> +#define QSERDES_TX_EMP_POST1_LVL(n) TX_OFF(n, 0x08)
> +#define QSERDES_TX_DRV_LVL(n) TX_OFF(n, 0x0C)
> +#define QSERDES_TX_LANE_MODE(n) TX_OFF(n, 0x54)
> +
> +/* RX LANE n (0, 1) registers */
> +#define QSERDES_RX_CDR_CONTROL1(n) RX_OFF(n, 0x0)
> +#define QSERDES_RX_CDR_CONTROL_HALF(n) RX_OFF(n, 0x8)
> +#define QSERDES_RX_RX_EQ_GAIN1_LSB(n) RX_OFF(n, 0xA8)
> +#define QSERDES_RX_RX_EQ_GAIN1_MSB(n) RX_OFF(n, 0xAC)
> +#define QSERDES_RX_RX_EQ_GAIN2_LSB(n) RX_OFF(n, 0xB0)
> +#define QSERDES_RX_RX_EQ_GAIN2_MSB(n) RX_OFF(n, 0xB4)
> +#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(n) RX_OFF(n, 0xBC)
> +#define QSERDES_RX_CDR_CONTROL_QUARTER(n) RX_OFF(n, 0xC)
> +#define QSERDES_RX_SIGDET_CNTRL(n) RX_OFF(n, 0x100)
> +
> +/* UFS PHY registers */
> +#define UFS_PHY_PHY_START PHY_OFF(0x00)
> +#define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x4)
> +#define UFS_PHY_TX_LANE_ENABLE PHY_OFF(0x44)
> +#define UFS_PHY_PWM_G1_CLK_DIVIDER PHY_OFF(0x08)
> +#define UFS_PHY_PWM_G2_CLK_DIVIDER PHY_OFF(0x0C)
> +#define UFS_PHY_PWM_G3_CLK_DIVIDER PHY_OFF(0x10)
> +#define UFS_PHY_PWM_G4_CLK_DIVIDER PHY_OFF(0x14)
> +#define UFS_PHY_CORECLK_PWM_G1_CLK_DIVIDER PHY_OFF(0x34)
> +#define UFS_PHY_CORECLK_PWM_G2_CLK_DIVIDER PHY_OFF(0x38)
> +#define UFS_PHY_CORECLK_PWM_G3_CLK_DIVIDER PHY_OFF(0x3C)
> +#define UFS_PHY_CORECLK_PWM_G4_CLK_DIVIDER PHY_OFF(0x40)
> +#define UFS_PHY_OMC_STATUS_RDVAL PHY_OFF(0x68)
> +#define UFS_PHY_LINE_RESET_TIME PHY_OFF(0x28)
> +#define UFS_PHY_LINE_RESET_GRANULARITY PHY_OFF(0x2C)
> +#define UFS_PHY_TSYNC_RSYNC_CNTL PHY_OFF(0x48)
> +#define UFS_PHY_PLL_CNTL PHY_OFF(0x50)
> +#define UFS_PHY_TX_LARGE_AMP_DRV_LVL PHY_OFF(0x54)
> +#define UFS_PHY_TX_SMALL_AMP_DRV_LVL PHY_OFF(0x5C)
> +#define UFS_PHY_TX_LARGE_AMP_POST_EMP_LVL PHY_OFF(0x58)
> +#define UFS_PHY_TX_SMALL_AMP_POST_EMP_LVL PHY_OFF(0x60)
> +#define UFS_PHY_CFG_CHANGE_CNT_VAL PHY_OFF(0x64)
> +#define UFS_PHY_RX_SYNC_WAIT_TIME PHY_OFF(0x6C)
> +#define UFS_PHY_TX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xB4)
> +#define UFS_PHY_RX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xE0)
> +#define UFS_PHY_TX_MIN_STALL_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xB8)
> +#define UFS_PHY_RX_MIN_STALL_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xE4)
> +#define UFS_PHY_TX_MIN_SAVE_CONFIG_TIME_CAPABILITY PHY_OFF(0xBC)
> +#define UFS_PHY_RX_MIN_SAVE_CONFIG_TIME_CAPABILITY PHY_OFF(0xE8)
> +#define UFS_PHY_RX_PWM_BURST_CLOSURE_LENGTH_CAPABILITY PHY_OFF(0xFC)
> +#define UFS_PHY_RX_MIN_ACTIVATETIME_CAPABILITY PHY_OFF(0x100)
> +#define UFS_PHY_RX_SIGDET_CTRL3 PHY_OFF(0x14c)
> +#define UFS_PHY_RMMI_ATTR_CTRL PHY_OFF(0x160)
> +#define UFS_PHY_RMMI_RX_CFGUPDT_L1 (1 << 7)
> +#define UFS_PHY_RMMI_TX_CFGUPDT_L1 (1 << 6)
> +#define UFS_PHY_RMMI_CFGWR_L1 (1 << 5)
> +#define UFS_PHY_RMMI_CFGRD_L1 (1 << 4)
> +#define UFS_PHY_RMMI_RX_CFGUPDT_L0 (1 << 3)
> +#define UFS_PHY_RMMI_TX_CFGUPDT_L0 (1 << 2)
> +#define UFS_PHY_RMMI_CFGWR_L0 (1 << 1)
> +#define UFS_PHY_RMMI_CFGRD_L0 (1 << 0)
> +#define UFS_PHY_RMMI_ATTRID PHY_OFF(0x164)
> +#define UFS_PHY_RMMI_ATTRWRVAL PHY_OFF(0x168)
> +#define UFS_PHY_RMMI_ATTRRDVAL_L0_STATUS PHY_OFF(0x16C)
> +#define UFS_PHY_RMMI_ATTRRDVAL_L1_STATUS PHY_OFF(0x170)
> +#define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x174)
> +
> +#define UFS_PHY_TX_LANE_ENABLE_MASK 0x3
> +
> +/*
> + * This structure represents the 20nm specific phy.
> + * common_cfg MUST remain the first field in this structure
> + * in case extra fields are added. This way, when calling
> + * get_ufs_qcom_phy() of generic phy, we can extract the
> + * common phy structure (struct ufs_qcom_phy) out of it
> + * regardless of the relevant specific phy.
> + */
> +struct ufs_qcom_phy_qmp_20nm {
> + struct ufs_qcom_phy common_cfg;
> +};
Do expect at some point the 20nm phy to change such that this struct would have something more in it? If not it seems like we should just use 'struct ufs_qcom_phy’ directly in this code and remove the additional indirection.
> +
> +static struct ufs_qcom_phy_calibration phy_cal_table_rate_A_1_2_0[] = {
> + UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
> + UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL3, 0x0D),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_VCOTAIL_EN, 0xe1),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0xcc),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL_TXBAND, 0x08),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x10),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x82),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x40),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0xff),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x19),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x90),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL2, 0x03),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(0), 0xf2),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x0c),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x12),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(1), 0xf2),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x0c),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x12),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(0), 0xff),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(0), 0xff),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(0), 0xff),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(0), 0x00),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(1), 0xff),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(1), 0xff),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(1), 0xff),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(1), 0x00),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x3f),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x1b),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x0f),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x01),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_EMP_POST1_LVL(0), 0x2F),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_DRV_LVL(0), 0x20),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_EMP_POST1_LVL(1), 0x2F),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_DRV_LVL(1), 0x20),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(0), 0x68),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(1), 0x68),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(1), 0xdc),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(0), 0xdc),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x3),
> +};
> +
> +static struct ufs_qcom_phy_calibration phy_cal_table_rate_A_1_3_0[] = {
> + UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
> + UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL3, 0x0D),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_VCOTAIL_EN, 0xe1),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0xcc),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL_TXBAND, 0x08),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x10),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x82),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x40),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0xff),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x19),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x90),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL2, 0x03),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(0), 0xf2),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x0c),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x12),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(1), 0xf2),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x0c),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x12),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(0), 0xff),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(0), 0xff),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(0), 0xff),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(0), 0x00),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(1), 0xff),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(1), 0xff),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(1), 0xff),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(1), 0x00),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x2b),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x38),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x3c),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RES_CODE_UP_OFFSET, 0x02),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RES_CODE_DN_OFFSET, 0x02),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x01),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CNTRL, 0x40),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(0), 0x68),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(1), 0x68),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(1), 0xdc),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(0), 0xdc),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x3),
> +};
> +
> +static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = {
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x98),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0x65),
> + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x1e),
> +};
> +
While I doubt we’d include this in more than one place, seems like the static tables should be in the .c file instead.
> +#endif
> diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/phy-qcom-ufs.c
> new file mode 100644
> index 0000000..44ee983
> --- /dev/null
> +++ b/drivers/phy/phy-qcom-ufs.c
> @@ -0,0 +1,745 @@
> +/*
> + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include "phy-qcom-ufs-i.h"
> +
> +#define MAX_PROP_NAME 32
> +#define VDDA_PHY_MIN_UV 1000000
> +#define VDDA_PHY_MAX_UV 1000000
> +#define VDDA_PLL_MIN_UV 1800000
> +#define VDDA_PLL_MAX_UV 1800000
> +#define VDDP_REF_CLK_MIN_UV 1200000
> +#define VDDP_REF_CLK_MAX_UV 1200000
> +
> +static int __ufs_qcom_phy_init_vreg(struct phy *, struct ufs_qcom_phy_vreg *,
> + const char *, bool);
> +static int ufs_qcom_phy_init_vreg(struct phy *, struct ufs_qcom_phy_vreg *,
> + const char *);
> +static int ufs_qcom_phy_base_init(struct platform_device *pdev,
> + struct ufs_qcom_phy *phy_common);
> +
> +int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
> + struct ufs_qcom_phy_calibration *tbl_A,
> + int tbl_size_A,
> + struct ufs_qcom_phy_calibration *tbl_B,
> + int tbl_size_B, bool is_rate_B)
> +{
> + int i;
> + int ret = 0;
> +
> + if (!tbl_A) {
> + dev_err(ufs_qcom_phy->dev, "%s: tbl_A is NULL", __func__);
> + ret = EINVAL;
> + goto out;
> + }
> +
> + for (i = 0; i < tbl_size_A; i++)
> + writel_relaxed(tbl_A[i].cfg_value,
> + ufs_qcom_phy->mmio + tbl_A[i].reg_offset);
> +
> + /*
> + * In case we would like to work in rate B, we need
> + * to override a registers that were configured in rate A table
> + * with registers of rate B table.
> + * table.
> + */
> + if (is_rate_B) {
> + if (!tbl_B) {
> + dev_err(ufs_qcom_phy->dev, "%s: tbl_B is NULL",
> + __func__);
> + ret = EINVAL;
> + goto out;
> + }
> +
> + for (i = 0; i < tbl_size_B; i++)
> + writel_relaxed(tbl_B[i].cfg_value,
> + ufs_qcom_phy->mmio + tbl_B[i].reg_offset);
> + }
> +
> + /* flush buffered writes */
> + mb();
> +
> +out:
> + return ret;
> +}
> +
> +struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev,
> + struct ufs_qcom_phy *common_cfg,
> + struct phy_ops *ufs_qcom_phy_gen_ops,
> + struct ufs_qcom_phy_specific_ops *phy_spec_ops)
> +{
> + int err;
> + struct device *dev = &pdev->dev;
> + struct phy *generic_phy = NULL;
> + struct phy_provider *phy_provider;
> +
> + err = ufs_qcom_phy_base_init(pdev, common_cfg);
> + if (err) {
> + dev_err(dev, "%s: phy base init failed %d\n", __func__, err);
> + goto out;
> + }
> +
> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> + if (IS_ERR(phy_provider)) {
> + err = PTR_ERR(phy_provider);
> + dev_err(dev, "%s: failed to register phy %d\n", __func__, err);
> + goto out;
> + }
> +
> + generic_phy = devm_phy_create(dev, NULL, ufs_qcom_phy_gen_ops);
> + if (IS_ERR(generic_phy)) {
> + err = PTR_ERR(generic_phy);
> + dev_err(dev, "%s: failed to create phy %d\n", __func__, err);
> + goto out;
> + }
> +
> + common_cfg->phy_spec_ops = phy_spec_ops;
> + common_cfg->dev = dev;
> +
> +out:
> + return generic_phy;
> +}
> +
> +/*
> + * This assumes the embedded phy structure inside generic_phy is of type
> + * struct ufs_qcom_phy. In order to function properly it's crucial
> + * to keep the embedded struct "struct ufs_qcom_phy common_cfg"
> + * as the first inside generic_phy.
> + */
> +struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy)
> +{
> + return (struct ufs_qcom_phy *)phy_get_drvdata(generic_phy);
> +}
> +
> +static
> +int ufs_qcom_phy_base_init(struct platform_device *pdev,
> + struct ufs_qcom_phy *phy_common)
> +{
> + struct device *dev = &pdev->dev;
> + struct resource *res;
> + int err = 0;
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_mem");
> + if (!res) {
> + dev_err(dev, "%s: phy_mem resource not found\n", __func__);
> + err = -ENOMEM;
> + goto out;
> + }
> +
> + phy_common->mmio = devm_ioremap_resource(dev, res);
> + if (IS_ERR((void const *)phy_common->mmio)) {
> + err = PTR_ERR((void const *)phy_common->mmio);
> + phy_common->mmio = NULL;
> + dev_err(dev, "%s: ioremap for phy_mem resource failed %d\n",
> + __func__, err);
> + goto out;
> + }
> +
> + /* "dev_ref_clk_ctrl_mem" is optional resource */
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> + "dev_ref_clk_ctrl_mem");
> + if (!res) {
> + dev_dbg(dev, "%s: dev_ref_clk_ctrl_mem resource not found\n",
> + __func__);
> + goto out;
> + }
> +
> + phy_common->dev_ref_clk_ctrl_mmio = devm_ioremap_resource(dev, res);
> + if (IS_ERR((void const *)phy_common->dev_ref_clk_ctrl_mmio)) {
> + err = PTR_ERR((void const *)phy_common->dev_ref_clk_ctrl_mmio);
> + phy_common->dev_ref_clk_ctrl_mmio = NULL;
> + dev_err(dev, "%s: ioremap for dev_ref_clk_ctrl_mem resource failed %d\n",
> + __func__, err);
> + }
> +
> +out:
> + return err;
> +}
> +
> +static int __ufs_qcom_phy_clk_get(struct phy *phy,
> + const char *name, struct clk **clk_out, bool err_print)
> +{
> + struct clk *clk;
> + int err = 0;
> + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy);
> + struct device *dev = ufs_qcom_phy->dev;
> +
> + clk = devm_clk_get(dev, name);
> + if (IS_ERR(clk)) {
> + err = PTR_ERR(clk);
> + if (err_print)
> + dev_err(dev, "failed to get %s err %d", name, err);
> + } else {
> + *clk_out = clk;
> + }
> +
> + return err;
> +}
> +
> +static
> +int ufs_qcom_phy_clk_get(struct phy *phy,
> + const char *name, struct clk **clk_out)
> +{
> + return __ufs_qcom_phy_clk_get(phy, name, clk_out, true);
> +}
> +
> +int
> +ufs_qcom_phy_init_clks(struct phy *generic_phy,
> + struct ufs_qcom_phy *phy_common)
> +{
> + int err;
> +
> + err = ufs_qcom_phy_clk_get(generic_phy, "tx_iface_clk",
> + &phy_common->tx_iface_clk);
> + if (err)
> + goto out;
> +
> + err = ufs_qcom_phy_clk_get(generic_phy, "rx_iface_clk",
> + &phy_common->rx_iface_clk);
> + if (err)
> + goto out;
> +
> + err = ufs_qcom_phy_clk_get(generic_phy, "ref_clk_src",
> + &phy_common->ref_clk_src);
> + if (err)
> + goto out;
> +
> + /*
> + * "ref_clk_parent" is optional hence don't abort init if it's not
> + * found.
> + */
> + __ufs_qcom_phy_clk_get(generic_phy, "ref_clk_parent",
> + &phy_common->ref_clk_parent, false);
> +
> + err = ufs_qcom_phy_clk_get(generic_phy, "ref_clk",
> + &phy_common->ref_clk);
> +
> +out:
> + return err;
> +}
> +
> +int
> +ufs_qcom_phy_init_vregulators(struct phy *generic_phy,
> + struct ufs_qcom_phy *phy_common)
> +{
> + int err;
> +
> + err = ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vdda_pll,
> + "vdda-pll");
> + if (err)
> + goto out;
> +
> + err = ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vdda_phy,
> + "vdda-phy");
> +
> + if (err)
> + goto out;
> +
> + /* vddp-ref-clk-* properties are optional */
> + __ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vddp_ref_clk,
> + "vddp-ref-clk", true);
> +out:
> + return err;
> +}
> +
> +static int __ufs_qcom_phy_init_vreg(struct phy *phy,
> + struct ufs_qcom_phy_vreg *vreg, const char *name, bool optional)
> +{
> + int err = 0;
> + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy);
> + struct device *dev = ufs_qcom_phy->dev;
> +
> + char prop_name[MAX_PROP_NAME];
> +
> + vreg->name = kstrdup(name, GFP_KERNEL);
> + if (!vreg->name) {
> + err = -ENOMEM;
> + goto out;
> + }
> +
> + vreg->reg = devm_regulator_get(dev, name);
> + if (IS_ERR(vreg->reg)) {
> + err = PTR_ERR(vreg->reg);
> + vreg->reg = NULL;
> + if (!optional)
> + dev_err(dev, "failed to get %s, %d\n", name, err);
> + goto out;
> + }
> +
> + if (dev->of_node) {
> + snprintf(prop_name, MAX_PROP_NAME, "%s-max-microamp", name);
> + err = of_property_read_u32(dev->of_node,
> + prop_name, &vreg->max_uA);
> + if (err && err != -EINVAL) {
> + dev_err(dev, "%s: failed to read %s\n",
> + __func__, prop_name);
> + goto out;
> + } else if (err == -EINVAL || !vreg->max_uA) {
> + if (regulator_count_voltages(vreg->reg) > 0) {
> + dev_err(dev, "%s: %s is mandatory\n",
> + __func__, prop_name);
> + goto out;
> + }
> + err = 0;
> + }
> + snprintf(prop_name, MAX_PROP_NAME, "%s-always-on", name);
> + if (of_get_property(dev->of_node, prop_name, NULL))
> + vreg->is_always_on = true;
> + else
> + vreg->is_always_on = false;
> + }
> +
> + if (!strcmp(name, "vdda-pll")) {
> + vreg->max_uV = VDDA_PLL_MAX_UV;
> + vreg->min_uV = VDDA_PLL_MIN_UV;
> + } else if (!strcmp(name, "vdda-phy")) {
> + vreg->max_uV = VDDA_PHY_MAX_UV;
> + vreg->min_uV = VDDA_PHY_MIN_UV;
> + } else if (!strcmp(name, "vddp-ref-clk")) {
> + vreg->max_uV = VDDP_REF_CLK_MAX_UV;
> + vreg->min_uV = VDDP_REF_CLK_MIN_UV;
> + }
> +
> +out:
> + if (err)
> + kfree(vreg->name);
> + return err;
> +}
> +
> +static int ufs_qcom_phy_init_vreg(struct phy *phy,
> + struct ufs_qcom_phy_vreg *vreg, const char *name)
> +{
> + return __ufs_qcom_phy_init_vreg(phy, vreg, name, false);
> +}
> +
> +static
> +int ufs_qcom_phy_cfg_vreg(struct phy *phy,
> + struct ufs_qcom_phy_vreg *vreg, bool on)
> +{
> + int ret = 0;
> + struct regulator *reg = vreg->reg;
> + const char *name = vreg->name;
> + int min_uV;
> + int uA_load;
> + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy);
> + struct device *dev = ufs_qcom_phy->dev;
> +
> + BUG_ON(!vreg);
> +
> + if (regulator_count_voltages(reg) > 0) {
> + min_uV = on ? vreg->min_uV : 0;
> + ret = regulator_set_voltage(reg, min_uV, vreg->max_uV);
> + if (ret) {
> + dev_err(dev, "%s: %s set voltage failed, err=%d\n",
> + __func__, name, ret);
> + goto out;
> + }
> + uA_load = on ? vreg->max_uA : 0;
> + ret = regulator_set_optimum_mode(reg, uA_load);
> + if (ret >= 0) {
> + /*
> + * regulator_set_optimum_mode() returns new regulator
> + * mode upon success.
> + */
> + ret = 0;
> + } else {
> + dev_err(dev, "%s: %s set optimum mode(uA_load=%d) failed, err=%d\n",
> + __func__, name, uA_load, ret);
> + goto out;
> + }
> + }
> +out:
> + return ret;
> +}
> +
> +static
> +int ufs_qcom_phy_enable_vreg(struct phy *phy,
> + struct ufs_qcom_phy_vreg *vreg)
> +{
> + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy);
> + struct device *dev = ufs_qcom_phy->dev;
> + int ret = 0;
> +
> + if (!vreg || vreg->enabled)
> + goto out;
> +
> + ret = ufs_qcom_phy_cfg_vreg(phy, vreg, true);
> + if (ret) {
> + dev_err(dev, "%s: ufs_qcom_phy_cfg_vreg() failed, err=%d\n",
> + __func__, ret);
> + goto out;
> + }
> +
> + ret = regulator_enable(vreg->reg);
> + if (ret) {
> + dev_err(dev, "%s: enable failed, err=%d\n",
> + __func__, ret);
> + goto out;
> + }
> +
> + vreg->enabled = true;
> +out:
> + return ret;
> +}
> +
> +int ufs_qcom_phy_enable_ref_clk(struct phy *generic_phy)
> +{
> + int ret = 0;
> + struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
> +
> + if (phy->is_ref_clk_enabled)
> + goto out;
> +
> + /*
> + * reference clock is propagated in a daisy-chained manner from
> + * source to phy, so ungate them at each stage.
> + */
> + ret = clk_prepare_enable(phy->ref_clk_src);
> + if (ret) {
> + dev_err(phy->dev, "%s: ref_clk_src enable failed %d\n",
> + __func__, ret);
> + goto out;
> + }
> +
> + /*
> + * "ref_clk_parent" is optional clock hence make sure that clk reference
> + * is available before trying to enable the clock.
> + */
> + if (phy->ref_clk_parent) {
> + ret = clk_prepare_enable(phy->ref_clk_parent);
> + if (ret) {
> + dev_err(phy->dev, "%s: ref_clk_parent enable failed %d\n",
> + __func__, ret);
> + goto out_disable_src;
> + }
> + }
> +
> + ret = clk_prepare_enable(phy->ref_clk);
> + if (ret) {
> + dev_err(phy->dev, "%s: ref_clk enable failed %d\n",
> + __func__, ret);
> + goto out_disable_parent;
> + }
> +
> + phy->is_ref_clk_enabled = true;
> + goto out;
> +
> +out_disable_parent:
> + if (phy->ref_clk_parent)
> + clk_disable_unprepare(phy->ref_clk_parent);
> +out_disable_src:
> + clk_disable_unprepare(phy->ref_clk_src);
> +out:
> + return ret;
> +}
> +
> +static
> +int ufs_qcom_phy_disable_vreg(struct phy *phy,
> + struct ufs_qcom_phy_vreg *vreg)
> +{
> + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy);
> + struct device *dev = ufs_qcom_phy->dev;
> + int ret = 0;
> +
> + if (!vreg || !vreg->enabled || vreg->is_always_on)
> + goto out;
> +
> + ret = regulator_disable(vreg->reg);
> +
> + if (!ret) {
> + /* ignore errors on applying disable config */
> + ufs_qcom_phy_cfg_vreg(phy, vreg, false);
> + vreg->enabled = false;
> + } else {
> + dev_err(dev, "%s: %s disable failed, err=%d\n",
> + __func__, vreg->name, ret);
> + }
> +out:
> + return ret;
> +}
> +
> +void ufs_qcom_phy_disable_ref_clk(struct phy *generic_phy)
> +{
> + struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
> +
> + if (phy->is_ref_clk_enabled) {
> + clk_disable_unprepare(phy->ref_clk);
> + /*
> + * "ref_clk_parent" is optional clock hence make sure that clk
> + * reference is available before trying to disable the clock.
> + */
> + if (phy->ref_clk_parent)
> + clk_disable_unprepare(phy->ref_clk_parent);
> + clk_disable_unprepare(phy->ref_clk_src);
> + phy->is_ref_clk_enabled = false;
> + }
> +}
> +
> +#define UFS_REF_CLK_EN (1 << 5)
> +
> +static void ufs_qcom_phy_dev_ref_clk_ctrl(struct phy *generic_phy, bool enable)
> +{
> + struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
> +
> + if (phy->dev_ref_clk_ctrl_mmio &&
> + (enable ^ phy->is_dev_ref_clk_enabled)) {
> + u32 temp = readl_relaxed(phy->dev_ref_clk_ctrl_mmio);
> +
> + if (enable)
> + temp |= UFS_REF_CLK_EN;
> + else
> + temp &= ~UFS_REF_CLK_EN;
> +
> + /*
> + * If we are here to disable this clock immediately after
> + * entering into hibern8, we need to make sure that device
> + * ref_clk is active atleast 1us after the hibern8 enter.
> + */
> + if (!enable)
> + udelay(1);
> +
> + writel_relaxed(temp, phy->dev_ref_clk_ctrl_mmio);
> + /* ensure that ref_clk is enabled/disabled before we return */
> + wmb();
> + /*
> + * If we call hibern8 exit after this, we need to make sure that
> + * device ref_clk is stable for atleast 1us before the hibern8
> + * exit command.
> + */
> + if (enable)
> + udelay(1);
> +
> + phy->is_dev_ref_clk_enabled = enable;
> + }
> +}
> +
> +void ufs_qcom_phy_enable_dev_ref_clk(struct phy *generic_phy)
> +{
> + ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, true);
> +}
> +
> +void ufs_qcom_phy_disable_dev_ref_clk(struct phy *generic_phy)
> +{
> + ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, false);
> +}
> +
> +/* Turn ON M-PHY RMMI interface clocks */
> +int ufs_qcom_phy_enable_iface_clk(struct phy *generic_phy)
> +{
> + struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
> + int ret = 0;
> +
> + if (phy->is_iface_clk_enabled)
> + goto out;
> +
> + ret = clk_prepare_enable(phy->tx_iface_clk);
> + if (ret) {
> + dev_err(phy->dev, "%s: tx_iface_clk enable failed %d\n",
> + __func__, ret);
> + goto out;
> + }
> + ret = clk_prepare_enable(phy->rx_iface_clk);
> + if (ret) {
> + clk_disable_unprepare(phy->tx_iface_clk);
> + dev_err(phy->dev, "%s: rx_iface_clk enable failed %d. disabling also tx_iface_clk\n",
> + __func__, ret);
> + goto out;
> + }
> + phy->is_iface_clk_enabled = true;
> +
> +out:
> + return ret;
> +}
> +
> +/* Turn OFF M-PHY RMMI interface clocks */
> +void ufs_qcom_phy_disable_iface_clk(struct phy *generic_phy)
> +{
> + struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
> +
> + if (phy->is_iface_clk_enabled) {
> + clk_disable_unprepare(phy->tx_iface_clk);
> + clk_disable_unprepare(phy->rx_iface_clk);
> + phy->is_iface_clk_enabled = false;
> + }
> +}
> +
> +int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
> +{
> + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
> + int ret = 0;
> +
> + if (!ufs_qcom_phy->phy_spec_ops->start_serdes) {
> + dev_err(ufs_qcom_phy->dev, "%s: start_serdes() callback is not supported\n",
> + __func__);
> + ret = -ENOTSUPP;
> + } else {
> + ufs_qcom_phy->phy_spec_ops->start_serdes(ufs_qcom_phy);
> + }
> +
> + return ret;
> +}
> +
> +int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes)
> +{
> + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
> + int ret = 0;
> +
> + if (!ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable) {
> + dev_err(ufs_qcom_phy->dev, "%s: set_tx_lane_enable() callback is not supported\n",
> + __func__);
> + ret = -ENOTSUPP;
> + } else {
> + ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable(ufs_qcom_phy,
> + tx_lanes);
> + }
> +
> + return ret;
> +}
> +
> +void ufs_qcom_phy_save_controller_version(struct phy *generic_phy,
> + u8 major, u16 minor, u16 step)
> +{
> + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
> +
> + ufs_qcom_phy->host_ctrl_rev_major = major;
> + ufs_qcom_phy->host_ctrl_rev_minor = minor;
> + ufs_qcom_phy->host_ctrl_rev_step = step;
> +}
> +
> +int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool is_rate_B)
> +{
> + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
> + int ret = 0;
> +
> + if (!ufs_qcom_phy->phy_spec_ops->calibrate_phy) {
> + dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() callback is not supported\n",
> + __func__);
> + ret = -ENOTSUPP;
> + } else {
> + ret = ufs_qcom_phy->phy_spec_ops->
> + calibrate_phy(ufs_qcom_phy, is_rate_B);
> + if (ret)
> + dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() failed %d\n",
> + __func__, ret);
> + }
> +
> + return ret;
> +}
> +
> +int ufs_qcom_phy_remove(struct phy *generic_phy,
> + struct ufs_qcom_phy *ufs_qcom_phy)
> +{
> + phy_power_off(generic_phy);
> +
> + kfree(ufs_qcom_phy->vdda_pll.name);
> + kfree(ufs_qcom_phy->vdda_phy.name);
> +
> + return 0;
> +}
> +
> +int ufs_qcom_phy_exit(struct phy *generic_phy)
> +{
> + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
> +
> + if (ufs_qcom_phy->is_powered_on)
> + phy_power_off(generic_phy);
> +
> + return 0;
> +}
> +
> +int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy)
> +{
> + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
> +
> + if (!ufs_qcom_phy->phy_spec_ops->is_physical_coding_sublayer_ready) {
> + dev_err(ufs_qcom_phy->dev, "%s: is_physical_coding_sublayer_ready() callback is not supported\n",
> + __func__);
> + return -ENOTSUPP;
> + }
> +
> + return ufs_qcom_phy->phy_spec_ops->
> + is_physical_coding_sublayer_ready(ufs_qcom_phy);
> +}
> +
> +int ufs_qcom_phy_power_on(struct phy *generic_phy)
> +{
> + struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
> + struct device *dev = phy_common->dev;
> + int err;
> +
> + err = ufs_qcom_phy_enable_vreg(generic_phy, &phy_common->vdda_phy);
> + if (err) {
> + dev_err(dev, "%s enable vdda_phy failed, err=%d\n",
> + __func__, err);
> + goto out;
> + }
> +
> + phy_common->phy_spec_ops->power_control(phy_common, true);
> +
> + /* vdda_pll also enables ref clock LDOs so enable it first */
> + err = ufs_qcom_phy_enable_vreg(generic_phy, &phy_common->vdda_pll);
> + if (err) {
> + dev_err(dev, "%s enable vdda_pll failed, err=%d\n",
> + __func__, err);
> + goto out_disable_phy;
> + }
> +
> + err = ufs_qcom_phy_enable_ref_clk(generic_phy);
> + if (err) {
> + dev_err(dev, "%s enable phy ref clock failed, err=%d\n",
> + __func__, err);
> + goto out_disable_pll;
> + }
> +
> + /* enable device PHY ref_clk pad rail */
> + if (phy_common->vddp_ref_clk.reg) {
> + err = ufs_qcom_phy_enable_vreg(generic_phy,
> + &phy_common->vddp_ref_clk);
> + if (err) {
> + dev_err(dev, "%s enable vddp_ref_clk failed, err=%d\n",
> + __func__, err);
> + goto out_disable_ref_clk;
> + }
> + }
> +
> + phy_common->is_powered_on = true;
> + goto out;
> +
> +out_disable_ref_clk:
> + ufs_qcom_phy_disable_ref_clk(generic_phy);
> +out_disable_pll:
> + ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_pll);
> +out_disable_phy:
> + ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_phy);
> +out:
> + return err;
> +}
> +
> +int ufs_qcom_phy_power_off(struct phy *generic_phy)
> +{
> + struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
> +
> + phy_common->phy_spec_ops->power_control(phy_common, false);
> +
> + if (phy_common->vddp_ref_clk.reg)
> + ufs_qcom_phy_disable_vreg(generic_phy,
> + &phy_common->vddp_ref_clk);
> + ufs_qcom_phy_disable_ref_clk(generic_phy);
> +
> + ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_pll);
> + ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_phy);
> + phy_common->is_powered_on = false;
> +
> + return 0;
> +}
> diff --git a/include/linux/phy/phy-qcom-ufs.h b/include/linux/phy/phy-qcom-ufs.h
> new file mode 100644
> index 0000000..5feb1c9
> --- /dev/null
> +++ b/include/linux/phy/phy-qcom-ufs.h
> @@ -0,0 +1,33 @@
> +/*
> + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef PHY_QCOM_UFS_H_
> +#define PHY_QCOM_UFS_H_
> +
> +#include "phy.h"
> +
> +int ufs_qcom_phy_enable_ref_clk(struct phy *phy);
> +void ufs_qcom_phy_disable_ref_clk(struct phy *phy);
what’s the difference here between the two above and below? Might be useful for all of these functions to have DocBook style comments.
> +void ufs_qcom_phy_enable_dev_ref_clk(struct phy *);
> +void ufs_qcom_phy_disable_dev_ref_clk(struct phy *);
Can we be consistent for readability and have these be:
void ufs_qcom_phy_enable_dev_ref_clk(struct phy *phy);
void ufs_qcom_phy_disable_dev_ref_clk(struct phy *phy);
> +int ufs_qcom_phy_enable_iface_clk(struct phy *phy);
> +void ufs_qcom_phy_disable_iface_clk(struct phy *phy);
> +int ufs_qcom_phy_start_serdes(struct phy *generic_phy);
> +int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes);
> +int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool is_rate_B);
> +int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy);
> +void ufs_qcom_phy_save_controller_version(struct phy *generic_phy,
> + u8 major, u16 minor, u16 step);
similar comment as above, can we make generic_phy just phy to match.
As there isn’t a matching ‘restore’ to ufs_qcom_phy_save_controller_version. Is this really ufs_qcom_phy_set_controller_version instead?
> +
> +#endif /* PHY_QCOM_UFS_H_ */
> --
> 1.8.2.1
>
> --
> QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
