Hi Stefan, On Tue, Jan 06, 2015 at 12:16:35PM +0100, Stefan Priebe - Profihost AG wrote: > while testing 595b8ecd47e4dde64f704bf78d8c9b97e070ac67 ([PATCH] block: > remove artifical max_hw_sectors cap), i came around a problem with some > crucial m500 ssds direct attached. > > With the patch applied, i see the following max_sectors_kb value: > # cat /sys/block/sdi/queue/max_sectors_kb > 16383 > > But this results in the following error messages (at random time - most > probably at high load): > > Write(10): 2a 00 04 f9 db f0 00 0c d8 00 > scsi target0:0:7: handle(0x000a), sas_address(0x4433221107000000), phy(7) > scsi target0:0:7: enclosure_logical_id(0x5003048016aee700), slot(5) Seems like I misdirected you to only linux-ide, as from this printk it seems like the SSD is attached to a SAS HBA using the mpt2 or mpt3 drivers. But 16383 kilobytes if 32766 sectors, which is still only half of what ATA disks should support. It would be interesting if other people also see an issue with too large I/Os on a m500 SSD when attached to an ATA controller. > sd 0:0:7:0: task abort: SUCCESS scmd(ffff88018c6b4700) > sd 0:0:7:0: attempting task abort! scmd(ffff8807a12e6800) > sd 0:0:7:0: [sdh] CDB: Read(10): 28 00 15 d4 f9 60 00 00 10 00 > scsi target0:0:7: handle(0x000a), sas_address(0x4433221107000000), phy(7) > scsi target0:0:7: enclosure_logical_id(0x5003048016aee700), slot(5) > sd 0:0:7:0: task abort: SUCCESS scmd(ffff8807a12e6800) > sd 0:0:7:0: attempting task abort! scmd(ffff88078d989800) > sd 0:0:7:0: [sdh] CDB: Read(10): 28 00 15 aa d2 f9 00 00 20 00 > > Stefan > -- > To unsubscribe from this list: send the line "unsubscribe linux-ide" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html ---end quoted text--- -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
