Update driver "mask_interrupts" before enable/disable hardware interrupt in order to avoid missing interrupts because of "mask_interrupts" still set to 1 and hardware interrupts are enabled. Cc: <stable@xxxxxxxxxxxxxxx> Signed-off-by: Sumit Saxena <sumit.saxena@xxxxxxxxxxxxx> Signed-off-by: Chaitra Basappa <chaitra.basappa@xxxxxxxxxxxxx> --- drivers/scsi/megaraid/megaraid_sas_fusion.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index fe60743..a703c86 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -102,6 +102,8 @@ megasas_enable_intr_fusion(struct megasas_instance *instance) { struct megasas_register_set __iomem *regs; regs = instance->reg_set; + + instance->mask_interrupts = 0; /* For Thunderbolt/Invader also clear intr on enable */ writel(~0, ®s->outbound_intr_status); readl(®s->outbound_intr_status); @@ -110,7 +112,6 @@ megasas_enable_intr_fusion(struct megasas_instance *instance) /* Dummy readl to force pci flush */ readl(®s->outbound_intr_mask); - instance->mask_interrupts = 0; } /** -- 1.7.3 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html