This patch series has fixes for bugs and compiler warnings as well as code cleanup and modernization. It covers all ten NCR5380 drivers and the three core NCR5380 drivers so it's fairly large. These patches remove a lot of duplicated code and C pre-processor abuse. There are also patches for scsi_add_host() conversion for atari_scsi, mac_scsi and sun3_scsi. Some steps are taken toward re-unification of the NCR5380 core driver forks by reducing divergence between them. Also, the atari_NCR5380.c core driver is generalized so it can be used by sun3_scsi.c (and others). I have compile-tested all of the NCR5380 drivers (x86, ARM and m68k) and executed mac_scsi and dmx3191d on suitable hardware. I found no regressions but the core NCR5380 drivers have bugs unrelated to these patches. Testing mac_scsi and dmx3191d provides only limited code coverage for these patches. Some testing on Sun 3, Atari ST and/or Atari TT would be nice (I don't have the hardware). There are old bugs relating to exception handling and autosense in the core NCR5380 drivers that can make testing difficult. I'm working on a series of patches to address these bugs. Those patches are not yet ready for submission but they were helpful for the testing I did and may be helpful to other testers. Let me know if so. Changes since v1: - Re-based to v3.17. - Addressed issues raised in code review (see relevant patches for details). - Added patches 30 to 36, to remove sun3_NCR5380.c entirely and remove more static variables from atari_NCR5380.c. This patch set stops short of parameterizing the drivers with platform_data and/or ops struct. IMHO, it would be premature to do such refactoring before drivers have been purged of static variables and certain #ifdefs. After that is done, entire modules could be replaced with platform devices. Several patches in this set address issues with the tagged command queueing code (see patches 7, 33 and 34). I've since learned from recent discussions on the linux-scsi list that use of the tag member in struct scsi_cmnd is deprecated. If removal of the tag member is imminent then it may be better to remove TCQ support from all of the NCR5380 drivers instead of this cleanup. Or it could be done separately. Removal of TCQ code might make re-unification easier, by bringing atari_NCR5380.c closer to NCR5380.c and eliminating some #ifdefs. Changes to the TCQ code would affect atari_scsi, being the only driver to #define SUPPORT_TAGS. Changes since v2: - Addressed issues raised in code review (see relevant patches for details). - Fixed a checkpatch warning in patch 22. - Added patch 37 to fix a typo. --- MAINTAINERS | 1 arch/m68k/atari/config.c | 27 arch/m68k/atari/stdma.c | 61 arch/m68k/include/asm/atari_stdma.h | 4 arch/m68k/include/asm/macintosh.h | 4 arch/m68k/mac/config.c | 146 + arch/m68k/sun3/config.c | 60 drivers/scsi/Kconfig | 2 drivers/scsi/NCR5380.c | 295 +-- drivers/scsi/NCR5380.h | 78 drivers/scsi/arm/cumana_1.c | 18 drivers/scsi/arm/oak.c | 23 drivers/scsi/atari_NCR5380.c | 983 +++++------- drivers/scsi/atari_scsi.c | 673 +++----- drivers/scsi/atari_scsi.h | 60 drivers/scsi/dmx3191d.c | 31 drivers/scsi/dtc.c | 85 - drivers/scsi/dtc.h | 26 drivers/scsi/g_NCR5380.c | 224 -- drivers/scsi/g_NCR5380.h | 26 drivers/scsi/mac_scsi.c | 542 ++---- drivers/scsi/mac_scsi.h | 74 drivers/scsi/pas16.c | 106 - drivers/scsi/pas16.h | 21 drivers/scsi/sun3_NCR5380.c | 2933 ------------------------------------ drivers/scsi/sun3_scsi.c | 512 ++---- drivers/scsi/sun3_scsi.h | 84 - drivers/scsi/t128.c | 83 - drivers/scsi/t128.h | 23 29 files changed, 1742 insertions(+), 5463 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
