Re: Oops in scsi_put_host_cmd_pool

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/01/2014 07:41 AM, Juergen Gross wrote:
During test of Xen pvSCSI frontend module I found the following issue:

When unplugging a passed-through SCSI-device the SCSI Host is removed.
When calling the final scsi_host_put() from the driver an Oops is
happening:

[  219.816292] (file=drivers/scsi/xen-scsifront.c, line=808)
scsifront_remove: device/vscsi/1 removed
[  219.816371] BUG: unable to handle kernel NULL pointer dereference at
0000000000000010
[  219.816380] IP: [<ffffffff805fdcf8>] scsi_put_host_cmd_pool+0x38/0xb0
[  219.816390] PGD 3bd60067 PUD 3d353067 PMD 0
[  219.816396] Oops: 0000 [#1] SMP
[  219.816400] Modules linked in: nls_utf8 sr_mod cdrom xen_scsifront
xt_pkttype xt_LOG xt_limit af_packet ip6t_REJECT xt_tcpudp
nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw ipt_REJECT iptable_raw
xt_CT iptable_filter ip6table_mangle nf_conntrack_netbios_ns
nf_conntrack_broadcast nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables
xt_conntrack nf_conntrack ip6table_filter ip6_tables x_tables
x86_pkg_temp_thermal thermal_sys coretemp hwmon crc32_pclmul
crc32c_intel ghash_clmulni_intel aesni_intel ablk_helper cryptd lrw
gf128mul glue_helper aes_x86_64 microcode pcspkr sg dm_mod autofs4
scsi_dh_alua scsi_dh_emc scsi_dh_rdac scsi_dh_hp_sw scsi_dh xen_blkfront
xen_netfront
[  219.816458] CPU: 0 PID: 23 Comm: xenwatch Not tainted
3.16.0-rc6-11-xen+ #66
[  219.816463] task: ffff88003da985d0 ti: ffff88003da9c000 task.ti:
ffff88003da9c000
[  219.816467] RIP: e030:[<ffffffff805fdcf8>]  [<ffffffff805fdcf8>]
scsi_put_host_cmd_pool+0x38/0xb0
[  219.816474] RSP: e02b:ffff88003da9fc20  EFLAGS: 00010202
[  219.816477] RAX: ffffffffa01a50c0 RBX: 0000000000000000 RCX:
0000000000000003
[  219.816481] RDX: 0000000000000240 RSI: ffff88003d242b80 RDI:
ffffffff80c708c0
[  219.816485] RBP: ffff88003da9fc38 R08: 4f7e974a31ed0290 R09:
0000000000000000
[  219.816488] R10: 0000000000007ff0 R11: 0000000000000001 R12:
ffff8800038f8000
[  219.816491] R13: ffffffffa01a50c0 R14: 0000000000000000 R15:
0000000000000000
[  219.816498] FS:  00007fe2e2eeb700(0000) GS:ffff88003f800000(0000)
knlGS:0000000000000000
[  219.816502] CS:  e033 DS: 0000 ES: 0000 CR0: 0000000080050033
[  219.816505] CR2: 0000000000000010 CR3: 000000003d20c000 CR4:
0000000000042660
[  219.816509] Stack:
[  219.816511]  ffff8800038f8000 ffff8800038f8030 ffff880003ae3400
ffff88003da9fc58
[  219.816516]  ffffffff805fe78b ffff8800038f8000 ffff88003bb82c40
ffff88003da9fc80
[  219.816521]  ffffffff805ff587 ffff8800038f81a0 ffff8800038f8190
ffff880003ae3400
[  219.816527] Call Trace:
[  219.816533]  [<ffffffff805fe78b>]
scsi_destroy_command_freelist+0x5b/0x60
[  219.816538]  [<ffffffff805ff587>] scsi_host_dev_release+0x97/0xe0
[  219.816543]  [<ffffffff805dd71d>] device_release+0x2d/0xa0
[  219.816548]  [<ffffffff804dbec7>] kobject_cleanup+0x77/0x1b0
[  219.816553]  [<ffffffff804dbd70>] kobject_put+0x30/0x60
[  219.816556]  [<ffffffff805dd9e2>] put_device+0x12/0x20
[  219.816560]  [<ffffffff805ff490>] scsi_host_put+0x10/0x20
[  219.816565]  [<ffffffffa01a2042>] scsifront_free+0x42/0x90
[xen_scsifront]
[  219.816569]  [<ffffffffa01a20ad>] scsifront_remove+0x1d/0x50
[xen_scsifront]
[  219.816576]  [<ffffffff805a4ee0>] xenbus_dev_remove+0x50/0xa0
[  219.816580]  [<ffffffff805e1a8a>] __device_release_driver+0x7a/0xf0
[  219.816584]  [<ffffffff805e1b1e>] device_release_driver+0x1e/0x30
[  219.816588]  [<ffffffff805e1440>] bus_remove_device+0x100/0x180
[  219.816593]  [<ffffffff805ddef1>] device_del+0x121/0x1b0
[  219.816596]  [<ffffffff805ddf99>] device_unregister+0x19/0x60
[  219.816601]  [<ffffffff805a56be>] xenbus_dev_changed+0x9e/0x1e0
[  219.816606]  [<ffffffff8079d695>] ?
_raw_spin_unlock_irqrestore+0x25/0x50
[  219.816611]  [<ffffffff805a41d0>] ? unregister_xenbus_watch+0x200/0x200
[  219.816615]  [<ffffffff805a7420>] frontend_changed+0x20/0x50
[  219.816619]  [<ffffffff805a426f>] xenwatch_thread+0x9f/0x160
[  219.816624]  [<ffffffff802a50f0>] ? prepare_to_wait_event+0xf0/0xf0
[  219.816628]  [<ffffffff8028485d>] kthread+0xcd/0xf0
[  219.816633]  [<ffffffff80284790>] ? kthread_create_on_node+0x170/0x170
[  219.816638]  [<ffffffff8079dcbc>] ret_from_fork+0x7c/0xb0
[  219.816642]  [<ffffffff80284790>] ? kthread_create_on_node+0x170/0x170
[  219.816645] Code: 8b af c0 00 00 00 48 c7 c7 c0 08 c7 80 e8 d1 e0 19
00 49 8b 84 24 c0 00 00 00 8b 90 48 01 00 00 85 d2 74 2f 48 8b 98 50 01
00 00 <8b> 43 10 85 c0 74 68 83 e8 01 85 c0 89 43 10 74 37 48 c7 c7 c0
[  219.816732] RIP  [<ffffffff805fdcf8>] scsi_put_host_cmd_pool+0x38/0xb0
[  219.816747]  RSP <ffff88003da9fc20>
[  219.816750] CR2: 0000000000000010
[  219.816753] ---[ end trace c6915ea21a3d05f7 ]---

I should mention I've specified .cmd_len in the scsi_host_template. The
only other driver doing this seems to be virtio_scsi.c, so I assume the
same problem could occur with passed-through SCSI devices under KVM...

After looking into the code the reason seems to be rather obvious:

scsi_find_host_cmd_pool() returns shost->hostt->cmd_pool if .cmd_size is
set. But shost->hostt->cmd_pool is never set. The following patch should
solve the issue (after testing it I'll send an official patch):

diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 88d46fe..da769f9 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -380,6 +380,10 @@ scsi_alloc_host_cmd_pool(struct Scsi_Host *shost)
                pool->slab_flags |= SLAB_CACHE_DMA;
                pool->gfp_mask = __GFP_DMA;
        }
+
+       if (shost->hostt->cmd_size)
+               shost->hostt->cmd_pool = pool;
+
        return pool;
 }


Juergen

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux