During test of Xen pvSCSI frontend module I found the following issue:
When unplugging a passed-through SCSI-device the SCSI Host is removed.
When calling the final scsi_host_put() from the driver an Oops is
happening:
[ 219.816292] (file=drivers/scsi/xen-scsifront.c, line=808)
scsifront_remove: device/vscsi/1 removed
[ 219.816371] BUG: unable to handle kernel NULL pointer dereference at
0000000000000010
[ 219.816380] IP: [<ffffffff805fdcf8>] scsi_put_host_cmd_pool+0x38/0xb0
[ 219.816390] PGD 3bd60067 PUD 3d353067 PMD 0
[ 219.816396] Oops: 0000 [#1] SMP
[ 219.816400] Modules linked in: nls_utf8 sr_mod cdrom xen_scsifront
xt_pkttype xt_LOG xt_limit af_packet ip6t_REJECT xt_tcpudp
nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw ipt_REJECT iptable_raw
xt_CT iptable_filter ip6table_mangle nf_conntrack_netbios_ns
nf_conntrack_broadcast nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables
xt_conntrack nf_conntrack ip6table_filter ip6_tables x_tables
x86_pkg_temp_thermal thermal_sys coretemp hwmon crc32_pclmul
crc32c_intel ghash_clmulni_intel aesni_intel ablk_helper cryptd lrw
gf128mul glue_helper aes_x86_64 microcode pcspkr sg dm_mod autofs4
scsi_dh_alua scsi_dh_emc scsi_dh_rdac scsi_dh_hp_sw scsi_dh xen_blkfront
xen_netfront
[ 219.816458] CPU: 0 PID: 23 Comm: xenwatch Not tainted
3.16.0-rc6-11-xen+ #66
[ 219.816463] task: ffff88003da985d0 ti: ffff88003da9c000 task.ti:
ffff88003da9c000
[ 219.816467] RIP: e030:[<ffffffff805fdcf8>] [<ffffffff805fdcf8>]
scsi_put_host_cmd_pool+0x38/0xb0
[ 219.816474] RSP: e02b:ffff88003da9fc20 EFLAGS: 00010202
[ 219.816477] RAX: ffffffffa01a50c0 RBX: 0000000000000000 RCX:
0000000000000003
[ 219.816481] RDX: 0000000000000240 RSI: ffff88003d242b80 RDI:
ffffffff80c708c0
[ 219.816485] RBP: ffff88003da9fc38 R08: 4f7e974a31ed0290 R09:
0000000000000000
[ 219.816488] R10: 0000000000007ff0 R11: 0000000000000001 R12:
ffff8800038f8000
[ 219.816491] R13: ffffffffa01a50c0 R14: 0000000000000000 R15:
0000000000000000
[ 219.816498] FS: 00007fe2e2eeb700(0000) GS:ffff88003f800000(0000)
knlGS:0000000000000000
[ 219.816502] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 219.816505] CR2: 0000000000000010 CR3: 000000003d20c000 CR4:
0000000000042660
[ 219.816509] Stack:
[ 219.816511] ffff8800038f8000 ffff8800038f8030 ffff880003ae3400
ffff88003da9fc58
[ 219.816516] ffffffff805fe78b ffff8800038f8000 ffff88003bb82c40
ffff88003da9fc80
[ 219.816521] ffffffff805ff587 ffff8800038f81a0 ffff8800038f8190
ffff880003ae3400
[ 219.816527] Call Trace:
[ 219.816533] [<ffffffff805fe78b>] scsi_destroy_command_freelist+0x5b/0x60
[ 219.816538] [<ffffffff805ff587>] scsi_host_dev_release+0x97/0xe0
[ 219.816543] [<ffffffff805dd71d>] device_release+0x2d/0xa0
[ 219.816548] [<ffffffff804dbec7>] kobject_cleanup+0x77/0x1b0
[ 219.816553] [<ffffffff804dbd70>] kobject_put+0x30/0x60
[ 219.816556] [<ffffffff805dd9e2>] put_device+0x12/0x20
[ 219.816560] [<ffffffff805ff490>] scsi_host_put+0x10/0x20
[ 219.816565] [<ffffffffa01a2042>] scsifront_free+0x42/0x90
[xen_scsifront]
[ 219.816569] [<ffffffffa01a20ad>] scsifront_remove+0x1d/0x50
[xen_scsifront]
[ 219.816576] [<ffffffff805a4ee0>] xenbus_dev_remove+0x50/0xa0
[ 219.816580] [<ffffffff805e1a8a>] __device_release_driver+0x7a/0xf0
[ 219.816584] [<ffffffff805e1b1e>] device_release_driver+0x1e/0x30
[ 219.816588] [<ffffffff805e1440>] bus_remove_device+0x100/0x180
[ 219.816593] [<ffffffff805ddef1>] device_del+0x121/0x1b0
[ 219.816596] [<ffffffff805ddf99>] device_unregister+0x19/0x60
[ 219.816601] [<ffffffff805a56be>] xenbus_dev_changed+0x9e/0x1e0
[ 219.816606] [<ffffffff8079d695>] ? _raw_spin_unlock_irqrestore+0x25/0x50
[ 219.816611] [<ffffffff805a41d0>] ? unregister_xenbus_watch+0x200/0x200
[ 219.816615] [<ffffffff805a7420>] frontend_changed+0x20/0x50
[ 219.816619] [<ffffffff805a426f>] xenwatch_thread+0x9f/0x160
[ 219.816624] [<ffffffff802a50f0>] ? prepare_to_wait_event+0xf0/0xf0
[ 219.816628] [<ffffffff8028485d>] kthread+0xcd/0xf0
[ 219.816633] [<ffffffff80284790>] ? kthread_create_on_node+0x170/0x170
[ 219.816638] [<ffffffff8079dcbc>] ret_from_fork+0x7c/0xb0
[ 219.816642] [<ffffffff80284790>] ? kthread_create_on_node+0x170/0x170
[ 219.816645] Code: 8b af c0 00 00 00 48 c7 c7 c0 08 c7 80 e8 d1 e0 19
00 49 8b 84 24 c0 00 00 00 8b 90 48 01 00 00 85 d2 74 2f 48 8b 98 50 01
00 00 <8b> 43 10 85 c0 74 68 83 e8 01 85 c0 89 43 10 74 37 48 c7 c7 c0
[ 219.816732] RIP [<ffffffff805fdcf8>] scsi_put_host_cmd_pool+0x38/0xb0
[ 219.816747] RSP <ffff88003da9fc20>
[ 219.816750] CR2: 0000000000000010
[ 219.816753] ---[ end trace c6915ea21a3d05f7 ]---
I should mention I've specified .cmd_len in the scsi_host_template. The
only other driver doing this seems to be virtio_scsi.c, so I assume the
same problem could occur with passed-through SCSI devices under KVM...
Juergen
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
