On 06/27/2014 09:38 PM, Maurizio Lombardi wrote:
>
>>> diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
>>> index 07934b0..a3e5648 100644
>>> --- a/drivers/scsi/be2iscsi/be_mgmt.c
>>> +++ b/drivers/scsi/be2iscsi/be_mgmt.c
>>> @@ -1015,7 +1015,7 @@ int mgmt_set_ip(struct beiscsi_hba *phba,
>>> if (if_info->dhcp_state) {
>>> beiscsi_log(phba, KERN_WARNING, BEISCSI_LOG_CONFIG,
>>> "BG_%d : DHCP Already Enabled\n");
>>> - return 0;
>>> + goto exit;
>> rc should be initialised - so this needs to be added to your patch
> It is initialized at the beginning of the function, and it must contain zero when the "goto exit" is executed.
Correct, I haven't noticed the initialisation, sorry for the confusion.
--tm
>
> int mgmt_set_ip(struct beiscsi_hba *phba,
> struct iscsi_iface_param_info *ip_param,
> struct iscsi_iface_param_info *subnet_param,
> uint32_t boot_proto)
> {
> struct be_cmd_get_def_gateway_resp gtway_addr_set;
> struct be_cmd_get_if_info_resp *if_info;
> struct be_cmd_set_dhcp_req *dhcpreq;
> struct be_cmd_rel_dhcp_req *reldhcp;
> struct be_dma_mem nonemb_cmd;
> uint8_t *gtway_addr;
> uint32_t ip_type;
> int rc;
>
> if (mgmt_get_all_if_id(phba))
> return -EIO;
>
> ip_type = (ip_param->param == ISCSI_NET_PARAM_IPV6_ADDR) ?
> BE2_IPV6 : BE2_IPV4 ;
>
> rc = mgmt_get_if_info(phba, ip_type, &if_info); <-------------- here
> if (rc)
> return rc;
>
> if (boot_proto == ISCSI_BOOTPROTO_DHCP) {
> if (if_info->dhcp_state) {
> beiscsi_log(phba, KERN_WARNING, BEISCSI_LOG_CONFIG,
> "BG_%d : DHCP Already Enabled\n");
> goto exit;
> }
>
> Regards,
> Maurizio Lombardi
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
