Current the midlayer fakes up a struct request for the explicit reset
ioctls, and those don't have a tag allocated to them. The fnic driver pokes
into midlayer structures to paper over this design issue, but that won't
work for the blk-mq case.
Either someone who can actually test the hardware will have to come up with
a similar hack for the blk-mq case, or we'll have to bite the bullet and fix
the way the EH ioctls work for real, but until that happens we fail these
explicit requests here.
Signed-off-by: Christoph Hellwig <hch@xxxxxx>
Cc: Hiral Patel <hiralpat@xxxxxxxxx>
Cc: Suma Ramars <sramars@xxxxxxxxx>
Cc: Brian Uchino <buchino@xxxxxxxxx>
---
drivers/scsi/fnic/fnic_scsi.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index 3f88f56..961bdf5 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -2224,6 +2224,22 @@ int fnic_device_reset(struct scsi_cmnd *sc)
tag = sc->request->tag;
if (unlikely(tag < 0)) {
+ /*
+ * XXX(hch): current the midlayer fakes up a struct
+ * request for the explicit reset ioctls, and those
+ * don't have a tag allocated to them. The below
+ * code pokes into midlayer structures to paper over
+ * this design issue, but that won't work for blk-mq.
+ *
+ * Either someone who can actually test the hardware
+ * will have to come up with a similar hack for the
+ * blk-mq case, or we'll have to bite the bullet and
+ * fix the way the EH ioctls work for real, but until
+ * that happens we fail these explicit requests here.
+ */
+ if (shost_use_blk_mq(sc->device->host))
+ goto fnic_device_reset_end;
+
tag = fnic_scsi_host_start_tag(fnic, sc);
if (unlikely(tag == SCSI_NO_TAG))
goto fnic_device_reset_end;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
