In order to issue a BLKRRPART the drive needs to be unmounted first, this
is not always possible on a machine. There is another way though:
'echo 1 > /sys/block/sda/device/rescan'. This rescans all the mode pages
so that the kernel is in sync.
Writing to cache_type does seem to be a better idea than using sdparm, but
this is erroring out on one of our drives, whereas sdparm sets it without
an error.
$echo "write through" > /sys/class/scsi_disk/6\:0\:0\:0/cache_type
-bash: echo: write error: Invalid argument
$dmesg | tail -4
[1667272.378024] sd 6:0:0:0: [sda]
[1667272.378547] Sense Key : Illegal Request [current]
[1667272.379254] sd 6:0:0:0: [sda]
[1667272.379758] Add. Sense: Invalid field in parameter list
I can think of a scenario where the kernel thinks that WCE is not set and issue
wrong flush commands and assume that the cache has been cleared. I think we
should find a better way to keep the kernel in sync, or inform the kernel of
this change.
- Vishwanath
On 06/06/2014 09:49 PM, Douglas Gilbert wrote:
> On 14-06-06 06:55 PM, James Bottomley wrote:
>> On Fri, 2014-06-06 at 17:14 -0400, Pai wrote:
>>> Hi All,
>>>
>>> I noticed that the sysfs file cache_type is not is sync with the information in the mode page. If we change the WCE attribute in the mode page (sdparm --set=WCE /dev/sda and sdparm --clear=WCE /dev/sda) it does not reflect this in the sysfs file.
>>>
>>> $ cat /sys/block/sda/device/scsi_disk/6\:0\:0\:0/cache_type
>>> write back
>>>
>>> $ sdparm --clear=WCE /dev/sda
>>> /dev/sda: TOSHIBA AL13SEB600 0101
>>>
>>> $ cat /sys/block/sda/device/scsi_disk/6\:0\:0\:0/cache_type
>>> write back
>>>
>>> Ideally cache_type should have changed to 'write through' or 'none'. I have a small one line change that can fix this one. This patch applies against the latest branch "linux-3.15-rc8".
>>>
>>> Few things to note:
>>> 1. revalidate_disk() also reads a whole bunch of other things from the mode page and I don't know if this will have any side effects. This call is made on store_cache_type as well, so I think it should be OK.
>>> 2. This is extra work which is not needed in most cases (mode pages hardly change). Is there an event that we can subscribe to when the modpages change?
>>>
>>> Please review.
>>>
>>> diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
>>> index efcbcd1..5b65ccc 100644
>>> --- a/drivers/scsi/sd.c
>>> +++ b/drivers/scsi/sd.c
>>> @@ -256,6 +256,7 @@ static ssize_t
>>> cache_type_show(struct device *dev, struct device_attribute *attr, char *buf)
>>> {
>>> struct scsi_disk *sdkp = to_scsi_disk(dev);
>>> + revalidate_disk(sdkp->disk);
>>> int ct = sdkp->RCD + 2*sdkp->WCE;
>>>
>>> return snprintf(buf, 40, "%s\n", sd_cache_types[ct]);
>> The behaviour you describe is correct. The cache type is probed once at
>> init. If you change the cache behind the back of the linux code, you
>> have to expect that we won't see it. We're definitely not doing a
>> revalidate on every write just in case, so by extension we expect that
>> to see it via sysfs either you change it through the provided interface
>> (writing to the cache_type file) or you inform the kernel if you change
>> it via other means by issuing the BLKRRPART ioctl.
> Have a look at
> echo "write through" > /sys/class/scsi_disk/6\:0\:0\:0/cache_type
>
> and/or
> echo "write back" > /sys/class/scsi_disk/6\:0\:0\:0/cache_type
>
> and those strings can be prefixed by "temporary ". The explanation
> and mapping to T10 terms is in drivers/scsi/sd.c cache_type_store(),
> or at least should be.
>
> Doug Gilbert
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
