There is an error with the medium access timeout feature of the sd driver. The
sdkp->medium_access_timed_out value is reset to zero in sd_done() in the wrong
place. Currently it is reset to zero only when a command returns sense data.
This can result in cases where the medium access check falsely triggers from
timed out commands which are hours or days apart.
For example, an I/O command times out and is aborted. It then retries and
succeeds. But with no sense data generated and returned, the
medium_access_timed_out value is not reset. If no sd command returns sense
data, then the next command to time out (however far in time from the first
failure) will trigger the medium access timeout and put the device offline.
The resetting of sdkp->medium_access_timed_out should occur before the check
for sense data.
Signed-off-by: David Jeffery <djeffery@xxxxxxxxxx>
---
To reproduce using scsi_debug, use SCSI_DEBUG_OPT_TIMEOUT or
SCSI_DEBUG_OPT_MAC_TIMEOUT to force an I/O command to timeout. Then, remove
the opt value so the I/O will succeed on retry. Perform more I/O as desired.
Finally, repeat the process to make a new I/O command time out. Without the
patch, the device will be marked offline even though many I/O commands have
succeeded between the 2 instances of timed out commands.
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 470954a..a41e68e 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1689,12 +1689,12 @@ static int sd_done(struct scsi_cmnd *SCpnt)
sshdr.ascq));
}
#endif
+ sdkp->medium_access_timed_out = 0;
+
if (driver_byte(result) != DRIVER_SENSE &&
(!sense_valid || sense_deferred))
goto out;
- sdkp->medium_access_timed_out = 0;
-
switch (sshdr.sense_key) {
case HARDWARE_ERROR:
case MEDIUM_ERROR:
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
