On Thu, Mar 06, 2014 at 12:51:27PM -0800, Mark Knecht wrote: > On Wed, Mar 5, 2014 at 1:40 PM, markus <markus@xxxxxxx> wrote: > > On Wed, Mar 05, 2014 at 10:21:07AM -0800, Mark Knecht wrote: > >> On Wed, Mar 5, 2014 at 9:50 AM, Markus <markus@xxxxxxx> wrote: > >> <SNIP> > I am not familiar with this message: > > "Device supports SMART and is Disabled" > > but there are lots of posts out there with folks asking about it. > Possibly you can figure out what's causing smart not to turn on, get > it turned on and get some info. right , thats why i writing to the scsi and lsi devs , because die disk supports smart and lots of other features, but the controller driver failes to enable support for this. Now i get that the mpt driver provides /dev/sg[0-1] root@outpost:~# smartctl -d scsi -x /dev/sg1 smartctl 6.2 2013-07-26 r3841 [sparc64-linux-3.13.5-mar] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org User Capacity: 2,000,398,934,016 bytes [2.00 TB] Logical block size: 512 bytes Logical Unit id: 0x50000394e2380537 Serial number: 7365P4KNT Device type: disk Local Time is: Fri Mar 7 09:54:47 2014 CET SMART support is: Available - device has SMART capability. SMART support is: Disabled Temperature Warning: Disabled or Not Supported Read Cache is: Enabled Writeback Cache is: Enabled === START OF READ SMART DATA SECTION === SMART Health Status: OK Error Counter logging not supported Device does not support Self Test logging Device does not support Background scan results logging scsiPrintSasPhy Log Sense Failed [unsupported field in scsi command] so i had read those posts and i tried but it won't work. root@outpost:~/lsiutil# smartctl -r scsiioctl,3 -s on -d scsi /dev/sg1 smartctl 6.2 2013-07-26 r3841 [sparc64-linux-3.13.5-mar] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org [inquiry: 12 01 00 01 fc 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=0 milliseconds resid=500 Incoming data, len=8: 00 00 00 00 04 00 80 83 89 [inquiry: 12 00 00 00 24 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=4 milliseconds resid=0 Incoming data, len=36: 00 00 00 05 12 45 00 00 02 41 54 41 20 20 20 20 20 10 54 4f 53 48 49 42 41 20 4d 51 30 31 41 42 42 32 20 30 55 20 20 === START OF ENABLE/DISABLE COMMANDS SECTION === [mode sense(6): 1a 00 1c 00 40 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=4 milliseconds resid=40 Incoming data, len=24: 00 17 00 00 08 00 00 00 00 00 00 02 00 1c 0a 08 06 10 08 00 00 00 00 00 00 00 [mode sense(6): 1a 00 5c 00 40 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=0 milliseconds resid=40 Incoming data, len=24: 00 17 00 00 08 00 00 00 00 00 00 02 00 1c 0a 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 00 00 00 00 02 00 1c 0a 08 06 10 08 00 00 00 00 00 00 00 [mode select(6): 15 10 00 00 18 00 ] Outgoing data, len=24: scsi_status=0x2, host_status=0x0, driver_status=0x8 info=0x1 duration=0 milliseconds resid=24 >>> Sense buffer, len=18: 00 70 00 0b 00 00 00 00 0a 00 00 00 00 00 00 00 00 10 00 00 status=2: sense_key=b asc=0 ascq=0 unable to enable Exception control and warning [aborted command] > > Sorry I cannot help more. > > Good luck, > Mark
Attachment:
signature.asc
Description: Digital signature
