On Wed, Mar 05, 2014 at 10:21:07AM -0800, Mark Knecht wrote: > On Wed, Mar 5, 2014 at 9:50 AM, Markus <markus@xxxxxxx> wrote: > <SNIP> > > > The hdparm result looks like there is somethink not right . There were no features supported but why ? > > > Does the HDD have S.M.A.R.T. features? Possibly > > smartctl -a /dev/sda root@outpost:~# smartctl -a /dev/sda smartctl 5.41 2011-06-09 r3365 [sparc64-linux-3.13.5-mar] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net Probable ATA device behind a SAT layer Try an additional '-d ata' or '-d sat' argument. so i try it with scsi. root@outpost:~# smartctl -d scsi -a /dev/sda smartctl 5.41 2011-06-09 r3365 [sparc64-linux-3.13.5-mar] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net User Capacity: 2,000,398,934,016 bytes [2.00 TB] Logical block size: 512 bytes Logical Unit id: 0x50000394e2380537 Serial number: 7365P4KNT Device type: disk Local Time is: Wed Mar 5 22:32:09 2014 CET Device supports SMART and is Disabled Temperature Warning Disabled or Not Supported SMART Health Status: OK Error Counter logging not supported Device does not support Self Test logging > > would provide some additional visibility? ..... [ 98.037209] Uniform Multi-Platform E-IDE driver [ 98.107564] SLAB: Unable to allocate memory on node 0 (gfp=0x40d1) [ 98.188985] cache: dma-kmalloc-512, object size: 512, order: 0 [ 98.268127] node 0: slabs: 0/0, objs: 0/0, free: 0 [ 98.333538] sr: out of memory. [ 98.373628] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 98.443390] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 98.448375] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 103.198705] scsi2 : ioc0: LSISAS1064 A3, FwRev=01080400h, Ports=1, MaxQ=511, IRQ=10 [ 103.329805] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x1221000000000000 [ 103.462762] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MQ01ABB2 0U PQ: 0 ANSI: 5 [ 103.571610] scsi 2:0:0:0: Attached scsi generic sg1 type 0 [ 103.645418] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x1221000001000000 [ 103.777635] scsi 2:0:1:0: Direct-Access ATA TOSHIBA MQ01ABB2 0U PQ: 0 ANSI: 5 [ 103.886607] scsi 2:0:1:0: Attached scsi generic sg2 type 0 [ 103.960517] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 2, phy 2, sas_addr 0x1221000002000000 [ 104.093109] scsi 2:0:2:0: Direct-Access ATA TOSHIBA MQ01ABB2 0U PQ: 0 ANSI: 5 [ 104.201973] scsi 2:0:2:0: Attached scsi generic sg3 type 0 [ 104.275830] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 3, phy 3, sas_addr 0x1221000003000000 [ 104.408412] scsi 2:0:3:0: Direct-Access ATA TOSHIBA MQ01ABB2 0U PQ: 0 ANSI: 5 [ 104.517379] scsi 2:0:3:0: Attached scsi generic sg4 type 0 [ 104.618997] sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 104.721185] sd 2:0:3:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 104.823771] sd 2:0:1:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 104.824017] sd 2:0:2:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 104.828691] sd 2:0:0:0: [sda] Write Protect is off [ 104.828697] sd 2:0:0:0: [sda] Mode Sense: 67 00 00 08 [ 104.829940] sd 2:0:2:0: [sdc] Write Protect is off [ 104.829945] sd 2:0:2:0: [sdc] Mode Sense: 67 00 00 08 [ 104.830488] sd 2:0:3:0: [sdd] Write Protect is off [ 104.830493] sd 2:0:3:0: [sdd] Mode Sense: 67 00 00 08 [ 104.833225] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 104.834471] sd 2:0:2:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 104.835118] sd 2:0:3:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 105.583175] sd 2:0:1:0: [sdb] Write Protect is off [ 105.623801] sda: sda1 sda2 sda3 [ 105.651118] sdc: sdc1 sdc9 [ 105.654024] sdd: sdd1 sdd9 [ 105.761966] sd 2:0:1:0: [sdb] Mode Sense: 67 00 00 08 [ 105.769029] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 105.775293] sd 2:0:2:0: [sdc] Attached SCSI disk [ 105.775941] sd 2:0:3:0: [sdd] Attached SCSI disk [ 106.014357] sd 2:0:0:0: [sda] Attached SCSI disk [ 106.158864] sdb: sdb1 sdb9 [ 106.205879] sd 2:0:1:0: [sdb] Attached SCSI disk [ 106.502387] random: nonblocking pool is initialized [ 106.792978] device-mapper: uevent: version 1.0.3 [ 106.861434] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@xxxxxxxxxx [ 108.085062] bio: create slab <bio-1> at 1 ..... > > - Mark Markus
Attachment:
signature.asc
Description: Digital signature
