Re: [PATCH v3 3/4] ata: Add APM X-Gene SoC SATA host controller driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tuesday 26 November 2013 10:11 PM, Loc Ho wrote:
> Hi,
> 
>>> int set_speed(struct *phy, int lane, u64 speed);
>>
>> it should be phy_set_speed.
> [Loc Ho]
> But your other functions don't repeat the prefix "phy"?

refer include/linux/phy/phy.h..

int phy_init(struct phy *phy);
int phy_exit(struct phy *phy);
int phy_power_on(struct phy *phy);
int phy_power_off(struct phy *phy);

??

> 
>>>
>>> where lane indicates the lane of the PHY and speed is the PHY speed in hertz.
>>
>> Does lane here means the number of lanes? Is the lane also obtained after the
>> training sequence?
> [Loc Ho]
> Lane here is the lane with you are changing the speed. If there are
> two lanes, then 0 parameter would change lane 0. 1 would change lane
> 1.

can different lanes operate at different speed at the same time?

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux