Hi,
>> +config SATA_XGENE
>> + tristate "APM X-Gene 6.0Gbps SATA host controller support"
>> + depends on SATA_AHCI_PLATFORM
>> + default y if ARM64
>> + select SATA_XGENE_PHY
>
> I don't think the "default y" is appropriate here, since there are going to
> be lots of ARM64 platforms in the long run that don't have this. Also,
> there is a trend towards using CONFIG_COMPILE_TEST to limit the
> visibility.
>
> I'd suggest something like
>
> config SATA_XGENE
> tristate "APM X-Gene 6.0Gbps SATA host controller support"
> depends on ARM64 || COMPILE_TEST
> ...
>
[Loc Ho]
Okay. How about this?
depends on ARM64 || COMPILE_TEST
select SATA_XGENE_PHY && SATA_AHCI_PLATFORM
>> +/* Enable for dumping CSR read/write access */
>> +#undef XGENE_DBG_CSR
>
> This should be removed now as well, along with the debug macro you already removed.
[Loc Ho]
This is very useful if one running into problem - one can enable all
CSR dump. I would like to keep this around for the time being.
>
>> +
>> +/* Temporary function until the PHY parameter API */
>> +extern void xgene_ahci_phy_set_pq(struct phy *phy, int chan, int data);
>> +extern void xgene_ahci_phy_set_spd(struct phy *phy, int chan, int gen);
>
> Ah, that should have been mentioned in the changeset text. Do you think you
> can remove these for the final version?
[Loc Ho]
Yes... Krishon, can you provide an patch that allows me to accommodate
this? Or should I come up one? I will trying to get rip of the first
one. But I will need the function to set the PHY speed - for
Gen2/Gen1. Let's plan on add these function:
a. int (*set_speed)(int gen_speed) where gen_speed is either AUTO,
GEN1, GEN2, or GEN3.
b. Change the PHY init function to take an optional parameter. This
would help my first function in case I can get rip of it.
>
>> +static void xgene_rd(void *addr, u32 *val)
>> +{
>> + *val = readl(addr);
>> +#if defined(XGENE_DBG_CSR)
>> + printk(KERN_DEBUG "SATAPHY CSR RD: 0x%p value: 0x%08x\n", addr, *val);
>> +#endif
>> +}
>
> The interface you are looking for is pr_debug() or dev_dbg(), which get
> built-in only if the DEBUG macro is set.
>
> In a lot of cases, it's actually best to remove debug output like this from
> the driver once you have it working -- whoever is debugging problems in
> the driver next might need completely different debugging information or
> can add them back easily if needed.
>
> It's your choice if you want to use pr_debug() or remove that output
> entirely. If you remove it, best remove the helper functions entirely
> and use readl/writel directly.
[Loc Ho]
I would like to keep this function for now until this driver actual
being used in production. I will use pr_debug.
>
>> +/* Flush the IOB to ensure all SATA controller writes completed before
>> + servicing the completed command. */
>> +static int xgene_ahci_iob_flush(struct xgene_ahci_context *ctx)
>> +{
>> + if (ctx->ahbc_io_base == NULL) {
>> + void *ahbc_base;
>> + u32 val;
>> +
>> + /* The AHBC address is fixed in X-Gene */
>> + ahbc_base = devm_ioremap(ctx->dev, 0x1F2A0000, 0x80000);
>> + if (!ahbc_base) {
>> + dev_err(ctx->dev, "can't map AHBC resource\n");
>> + return -ENODEV;
>> + }
>
> I had an important comment about the misuse of hardcoded I/O addresses
> here. Please never just post a new version with the same issue. In general,
> your options are:
>
> * rewrite the code in a more appropriate way
> * reply to the comment, arguing why you think your code is correct
> * ask for clarification if you don't know how to improve the code
> * mark the code as TODO and mention in the patch description why you
> are still working on this and that the current version should not
> be seen as final.
>
> If you don't do any of these, reviewers will get annoyed because you
> are wasting their time.
[Loc Ho]
Sorry about this one. I will add this to the DTS. If this resource
isn't available, then it will be nop.
>> +
>> +static int xgene_ahci_get_u32_param(struct platform_device *pdev,
>> + const char *of_name, char *acpi_name,
>> + u32 *param)
>> +{
>> +#ifdef CONFIG_ACPI
>> + if (efi_enabled(EFI_BOOT)) {
>> + unsigned long long value;
>> + acpi_status status;
>> + if (acpi_name == NULL)
>> + return -ENODEV;
>> + status = acpi_evaluate_integer(ACPI_HANDLE(&pdev->dev),
>> + acpi_name, NULL, &value);
>> + if (ACPI_FAILURE(status))
>> + return -ENODEV;
>> + *param = value;
>> + return 0;
>> + }
>> +#endif
>
> There are more previous comments that you have not addressed yet.
[Loc Ho]
Original, I didn't want to get rip of this as ACPI isn't available in
the 3.12 kernel yet. I will get rip of this as I don't need the ID any
more. Also, I will also get rip of the clock interface. Don't need
this as it is handled directly by the driver. This will address for DT
as well as ACPI.
>
>> diff --git a/drivers/ata/sata_xgene.h b/drivers/ata/sata_xgene.h
>> new file mode 100644
>> index 0000000..51e73f6
>> --- /dev/null
>> +++ b/drivers/ata/sata_xgene.h
>
> This file should probably just be folded into the driver, since it contains no
> interfaces between modules, just internal definitions.
[Loc Ho]
I can get rip this header file now. But in the future I may need to
add this back as I intended this driver to also support running from
our co-processor (ARMv7 32-bit). For that, I will need anothe file and
other function that will need knowledge of the context structure and
etc.
-Loc
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
