Signed-off-by: Loc Ho <lho@xxxxxxx>
Signed-off-by: Tuan Phan <tphan@xxxxxxx>
Signed-off-by: Suman Tripathi <stripathi@xxxxxxx>
---
.../devicetree/bindings/ata/apm-xgene.txt | 84 ++++++++++++++++++++
1 files changed, 84 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ata/apm-xgene.txt
diff --git a/Documentation/devicetree/bindings/ata/apm-xgene.txt b/Documentation/devicetree/bindings/ata/apm-xgene.txt
new file mode 100644
index 0000000..cd52864
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/apm-xgene.txt
@@ -0,0 +1,84 @@
+* APM X-Gene 6.0 Gb/s SATA nodes
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+Each SATA controller (pair of ports) have its own node.
+
+Required properties:
+- compatible : Shall be "apm,xgene-ahci"
+- reg : First memory resource shall be the AHCI memory resource
+ Second memory resource shall be the Serdes memory resource
+ Third memory resource shall be the optional Serdes
+ memory resource if mux'ed with another IP
+- interrupt-parent : Interrupt controller
+- interrupts : Interrupt mapping for SATA IRQ
+- #clock-cells : Shall be value of 1
+- clocks : Reference to the clock entry
+- clock-names : Shall be "eth01clk", "eth23clk", or "eth45clk".
+
+Optional properties:
+- status : Shall be "ok" if enabled or "na" if disabled. Default
+ is "ok".
+- serdes-diff-clk : Shall be 0 for external, 1 internal differential,
+ or 2 internal single ended clock. Default is 0.
+- gen-sel : Shall be 1 (force Gen1), 2 (Force Gen2, or 3 Gen3).
+ Default is 3.
+- EQA1 : Serdes EQ parameter for A1 chip. Default is 9.
+- EQ : Serdes EQ parameter for non-A1 chip. Default is 2.
+- GENAVG : Enable averaging Serdes calculation. Default is 0 for
+ A1 chip and 1 for non-A1 chip.
+- LBA1 : Serdes loopback buffer for A1 chip. Default is 1;
+- LB : Serdes loopback buffer for non-A1 chip. Default is 0;
+- LCA1 : Serdes loopback enable control for A1 chip. Default
+ is 1;
+- LC : Serdes loopback enable control for non-A1 chip.
+ Default is 0;
+- CDRA1 : Serdes SPD select CDR for A1 chip. Default is 5.
+- CDR : Serdes SPD select CDR for non-A1 chip. Default is 5.
+- PQA1 : Serdes PQ for A1 chip. Default is 8.
+- PQ : Serdes PQ for non-A1 chip. Default is 0xA.
+- coherent : Enable coherent (1 = enable, 0 = disable).
+ Default is 1.
+
+Example:
+ sata0: sata@1a000000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a000000 0x0 0x100000
+ 0x0 0x1f210000 0x0 0x10000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0x0 0x86 0x4>;
+ #clock-cells = <1>;
+ clocks = <ð01clk 0>;
+ clock-names = "eth01clk";
+ status = "na";
+ serdes-diff-clk = <0>;
+ gen-sel = <3>;
+ };
+
+ sata1: sata@1a400000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a400000 0x0 0x100000
+ 0x0 0x1f220000 0x0 0x10000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0x0 0x87 0x4>;
+ #clock-cells = <1>;
+ clocks = <ð23clk 0>;
+ clock-names = "eth23clk";
+ status = "na";
+ serdes-diff-clk = <0>;
+ gen-sel = <3>;
+ };
+
+ sata2: sata@1a800000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a800000 0x0 0x100000
+ 0x0 0x1f230000 0x0 0x10000
+ 0x0 0x1f2d0000 0x0 0x10000 >;
+ interrupt-parent = <&gic>;
+ interrupts = <0x0 0x88 0x4>;
+ #clock-cells = <1>;
+ clocks = <&sata45clk 0>;
+ clock-names = "sata45clk";
+ status = "ok";
+ serdes-diff-clk = <0>;
+ gen-sel = <3>;
+ };
--
1.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
