On resume, the SD driver currently waits until the block driver finishes executing a disk start command with blk_execute_rq. This patch changes the sd_resume callback to use blk_execute_rq_nowait instead, which allows it to return immediately, thus allowing the next device in the pm queue to resume. The return value of blk_execute_rq_nowait is handled in the background by sd_resume_complete. Any commands issued to the scsi disk during the startup will be queued up and executed once the disk is online. Thus no information is lost, and although the wait time itself isn't removed, it doesn't hold up the rest of the system.
In combination with the ata_port_resume patch, this patch greatly reduces S3 system resume time on systems with SATA drives. This is accomplished by removing the drive spinup time from the system resume delay. Applying these two patches allows SATA disks to resume asynchronously without holding up system resume; thus allowing the UI to come online sooner. There may be a short period after resume where the disks are still spinning up in the background, but the user shouldn't notice since the OS can function with the data left in RAM.
This patch applies to all three resume callbacks: resume, restore, and runtime-resume. There is only a performance benefit for resume, but for simplicity both restore and runtime-resume use the same code path.
Signed-off-by: Todd Brandt <todd.e.brandt@xxxxxxxxx>
Signed-off-by: Arjan van de Ven <arjan@xxxxxxxxxxxxxxx>
drivers/scsi/sd.c | 70 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 67 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index e62d17d..bd8411f 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -3117,18 +3117,82 @@ done:
return ret;
}
+static void sd_resume_complete(struct request *rq, int error)
+{
+ struct scsi_sense_hdr sshdr;
+ struct scsi_disk *sdkp = rq->end_io_data;
+ char *sense = rq->sense;
+
+ if (error) {
+ sd_printk(KERN_WARNING, sdkp, "START FAILED\n");
+ sd_print_result(sdkp, error);
+ if (sense && (driver_byte(error) & DRIVER_SENSE)) {
+ scsi_normalize_sense(sense,
+ SCSI_SENSE_BUFFERSIZE, &sshdr);
+ sd_print_sense_hdr(sdkp, &sshdr);
+ }
+ } else {
+ sd_printk(KERN_NOTICE, sdkp, "START SUCCESS\n");
+ }
+
+ kfree(sense);
+ rq->sense = NULL;
+ rq->end_io_data = NULL;
+ __blk_put_request(rq->q, rq);
+ scsi_disk_put(sdkp);
+}
+
static int sd_resume(struct device *dev)
{
+ unsigned char cmd[6] = { START_STOP };
struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
+ struct request *req;
+ char *sense = NULL;
int ret = 0;
if (!sdkp->device->manage_start_stop)
- goto done;
+ goto error;
sd_printk(KERN_NOTICE, sdkp, "Starting disk\n");
- ret = sd_start_stop_device(sdkp, 1);
-done:
+ cmd[4] |= 1;
+
+ if (sdkp->device->start_stop_pwr_cond)
+ cmd[4] |= 1 << 4; /* Active or Standby */
+
+ if (!scsi_device_online(sdkp->device)) {
+ ret = -ENODEV;
+ goto error;
+ }
+
+ req = blk_get_request(sdkp->device->request_queue, 0, __GFP_WAIT);
+ if (!req) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ sense = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO);
+ if (!sense) {
+ ret = -ENOMEM;
+ goto error_sense;
+ }
+
+ req->cmd_len = COMMAND_SIZE(cmd[0]);
+ memcpy(req->cmd, cmd, req->cmd_len);
+ req->sense = sense;
+ req->sense_len = 0;
+ req->retries = SD_MAX_RETRIES;
+ req->timeout = SD_TIMEOUT;
+ req->cmd_type = REQ_TYPE_BLOCK_PC;
+ req->cmd_flags |= REQ_PM | REQ_QUIET | REQ_PREEMPT;
+
+ req->end_io_data = sdkp;
+ blk_execute_rq_nowait(req->q, NULL, req, 1, sd_resume_complete);
+ return 0;
+
+ error_sense:
+ __blk_put_request(req->q, req);
+ error:
scsi_disk_put(sdkp);
return ret;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
