Currently pci_enable_msi_block() and pci_enable_msix() interfaces
return a error code in case of failure, 0 in case of success and a
positive value which indicates the number of MSI-X/MSI interrupts
that could have been allocated. The latter value should be passed
to a repeated call to the interfaces until a failure or success.
This technique proved to be confusing and error-prone. Vast share
of device drivers simply fail to follow the described guidelines.
This update converts pci_enable_msix() and pci_enable_msi_block()
interfaces to canonical kernel functions and makes them return a
error code in case of failure or 0 in case of success.
As result, device drivers will cease to use the overcomplicated
repeated fallbacks technique and resort to a straightforward
pattern - determine the number of MSI/MSI-X interrupts required
before calling pci_enable_msix() and pci_enable_msi_block()
interfaces.
Device drivers will use their knowledge of underlying hardware
to determine the number of MSI/MSI-X interrupts required.
The simplest case would be requesting all available interrupts -
to obtain that value device drivers will use pci_get_msi_cap()
interface for MSI and pci_msix_table_size() for MSI-X.
More complex cases would entail matching device capabilities
with the system environment, i.e. limiting number of hardware
queues (and hence associated MSI/MSI-X interrupts) to the number
of online CPUs.
Suggested-by: Tejun Heo <tj@xxxxxxxxxx>
Signed-off-by: Alexander Gordeev <agordeev@xxxxxxxxxx>
---
Documentation/PCI/MSI-HOWTO.txt | 71 ++++++++++++++++++---------------
arch/mips/pci/msi-octeon.c | 2 +-
arch/powerpc/kernel/msi.c | 2 +-
arch/powerpc/platforms/pseries/msi.c | 2 +-
arch/s390/pci/pci.c | 2 +-
arch/x86/kernel/apic/io_apic.c | 2 +-
drivers/pci/msi.c | 52 +++++++------------------
7 files changed, 58 insertions(+), 75 deletions(-)
diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt
index 1f37ce2..40abcfb 100644
--- a/Documentation/PCI/MSI-HOWTO.txt
+++ b/Documentation/PCI/MSI-HOWTO.txt
@@ -111,21 +111,27 @@ the device are in the range dev->irq to dev->irq + count - 1.
If this function returns a negative number, it indicates an error and
the driver should not attempt to request any more MSI interrupts for
-this device. If this function returns a positive number, it is
-less than 'count' and indicates the number of interrupts that could have
-been allocated. In neither case is the irq value updated or the device
-switched into MSI mode.
-
-The device driver must decide what action to take if
-pci_enable_msi_block() returns a value less than the number requested.
-For instance, the driver could still make use of fewer interrupts;
-in this case the driver should call pci_enable_msi_block()
-again. Note that it is not guaranteed to succeed, even when the
-'count' has been reduced to the value returned from a previous call to
-pci_enable_msi_block(). This is because there are multiple constraints
-on the number of vectors that can be allocated; pci_enable_msi_block()
-returns as soon as it finds any constraint that doesn't allow the
-call to succeed.
+this device.
+
+Device drivers should normally call pci_get_msi_cap() function before
+calling this function to determine maximum number of MSI interrupts
+a device can send.
+
+A sequence to achieve that might look like:
+
+static int foo_driver_enable_msi(struct foo_adapter *adapter, int nvec)
+{
+ rc = pci_get_msi_cap(adapter->pdev);
+ if (rc < 0)
+ return rc;
+
+ nvec = min(nvec, rc);
+ if (nvec < FOO_DRIVER_MINIMUM_NVEC) {
+ return -ENOSPC;
+
+ rc = pci_enable_msi_block(adapter->pdev, nvec);
+ return rc;
+}
4.2.3 pci_enable_msi_block_auto
@@ -218,9 +224,7 @@ interrupts assigned to the MSI-X vectors so it can free them again later.
If this function returns a negative number, it indicates an error and
the driver should not attempt to allocate any more MSI-X interrupts for
-this device. If it returns a positive number, it indicates the maximum
-number of interrupt vectors that could have been allocated. See example
-below.
+this device.
This function, in contrast with pci_enable_msi(), does not adjust
dev->irq. The device will not generate interrupts for this interrupt
@@ -229,24 +233,27 @@ number once MSI-X is enabled.
Device drivers should normally call this function once per device
during the initialization phase.
-It is ideal if drivers can cope with a variable number of MSI-X interrupts;
-there are many reasons why the platform may not be able to provide the
-exact number that a driver asks for.
+Device drivers should normally call pci_msix_table_size() function before
+calling this function to determine maximum number of MSI-X interrupts
+a device can send.
-A request loop to achieve that might look like:
+A sequence to achieve that might look like:
static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
{
- while (nvec >= FOO_DRIVER_MINIMUM_NVEC) {
- rc = pci_enable_msix(adapter->pdev,
- adapter->msix_entries, nvec);
- if (rc > 0)
- nvec = rc;
- else
- return rc;
- }
-
- return -ENOSPC;
+ rc = pci_msix_table_size(adapter->pdev);
+ if (rc < 0)
+ return rc;
+
+ nvec = min(nvec, rc);
+ if (nvec < FOO_DRIVER_MINIMUM_NVEC) {
+ return -ENOSPC;
+
+ for (i = 0; i < nvec; i++)
+ adapter->msix_entries[i].entry = i;
+
+ rc = pci_enable_msix(adapter->pdev, adapter->msix_entries, nvec);
+ return rc;
}
4.3.2 pci_disable_msix
diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
index d37be36..0ee5f4d 100644
--- a/arch/mips/pci/msi-octeon.c
+++ b/arch/mips/pci/msi-octeon.c
@@ -193,7 +193,7 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
* override arch_setup_msi_irqs()
*/
if (type == PCI_CAP_ID_MSI && nvec > 1)
- return 1;
+ return -EINVAL;
list_for_each_entry(entry, &dev->msi_list, list) {
ret = arch_setup_msi_irq(dev, entry);
diff --git a/arch/powerpc/kernel/msi.c b/arch/powerpc/kernel/msi.c
index 8bbc12d..36d70b9 100644
--- a/arch/powerpc/kernel/msi.c
+++ b/arch/powerpc/kernel/msi.c
@@ -22,7 +22,7 @@ int arch_msi_check_device(struct pci_dev* dev, int nvec, int type)
/* PowerPC doesn't support multiple MSI yet */
if (type == PCI_CAP_ID_MSI && nvec > 1)
- return 1;
+ return -EINVAL;
if (ppc_md.msi_check_device) {
pr_debug("msi: Using platform check routine.\n");
diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c
index 009ec73..89648c1 100644
--- a/arch/powerpc/platforms/pseries/msi.c
+++ b/arch/powerpc/platforms/pseries/msi.c
@@ -348,7 +348,7 @@ static int rtas_msi_check_device(struct pci_dev *pdev, int nvec, int type)
quota = msi_quota_for_device(pdev, nvec);
if (quota && quota < nvec)
- return quota;
+ return -ENOSPC;
return 0;
}
diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 61a3c2c..45a1875 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -426,7 +426,7 @@ int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
pr_debug("%s: requesting %d MSI-X interrupts...", __func__, nvec);
if (type == PCI_CAP_ID_MSI && nvec > 1)
- return 1;
+ return -EINVAL;
msi_vecs = min(nvec, ZPCI_MSI_VEC_MAX);
msi_vecs = min_t(unsigned int, msi_vecs, CONFIG_PCI_NR_MSI);
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index e63a5bd..6126eaf 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3145,7 +3145,7 @@ int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
/* Multiple MSI vectors only supported with interrupt remapping */
if (type == PCI_CAP_ID_MSI && nvec > 1)
- return 1;
+ return -EINVAL;
node = dev_to_node(&dev->dev);
irq_want = nr_irqs_gsi;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index ca59bfc..583ace1 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -719,7 +719,7 @@ static int msix_capability_init(struct pci_dev *dev,
ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX);
if (ret)
- goto out_avail;
+ goto error;
/*
* Some devices require MSI-X to be enabled before we can touch the
@@ -733,7 +733,7 @@ static int msix_capability_init(struct pci_dev *dev,
ret = populate_msi_sysfs(dev);
if (ret)
- goto out_free;
+ goto error;
/* Set MSI-X enabled bits and unmask the function */
pci_intx_for_msi(dev, 0);
@@ -744,24 +744,7 @@ static int msix_capability_init(struct pci_dev *dev,
return 0;
-out_avail:
- if (ret < 0) {
- /*
- * If we had some success, report the number of irqs
- * we succeeded in setting up.
- */
- struct msi_desc *entry;
- int avail = 0;
-
- list_for_each_entry(entry, &dev->msi_list, list) {
- if (entry->irq != 0)
- avail++;
- }
- if (avail != 0)
- ret = avail;
- }
-
-out_free:
+error:
free_msi_irqs(dev);
return ret;
@@ -832,13 +815,11 @@ EXPORT_SYMBOL(pci_get_msi_cap);
* @dev: device to configure
* @nvec: number of interrupts to configure
*
- * Allocate IRQs for a device with the MSI capability.
- * This function returns a negative errno if an error occurs. If it
- * is unable to allocate the number of interrupts requested, it returns
- * the number of interrupts it might be able to allocate. If it successfully
- * allocates at least the number of interrupts requested, it returns 0 and
- * updates the @dev's irq member to the lowest new interrupt number; the
- * other interrupt numbers allocated to this device are consecutive.
+ * Allocate IRQs for a device with the MSI capability. This function returns
+ * a negative errno if an error occurs. If it successfully allocates at least
+ * the number of interrupts requested, it returns 0 and updates the @dev's
+ * irq member to the lowest new interrupt number; the other interrupt numbers
+ * allocated to this device are consecutive.
*/
int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec)
{
@@ -848,7 +829,7 @@ int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec)
if (maxvec < 0)
return maxvec;
if (nvec > maxvec)
- return maxvec;
+ return -EINVAL;
status = pci_msi_check_device(dev, nvec, PCI_CAP_ID_MSI);
if (status)
@@ -879,13 +860,11 @@ int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *maxvec)
if (maxvec)
*maxvec = ret;
- do {
- nvec = ret;
- ret = pci_enable_msi_block(dev, nvec);
- } while (ret > 0);
-
- if (ret < 0)
+ nvec = ret;
+ ret = pci_enable_msi_block(dev, nvec);
+ if (ret)
return ret;
+
return nvec;
}
EXPORT_SYMBOL(pci_enable_msi_block_auto);
@@ -955,9 +934,6 @@ EXPORT_SYMBOL(pci_msix_table_size);
* MSI-X mode enabled on its hardware device function. A return of zero
* indicates the successful configuration of MSI-X capability structure
* with new allocated MSI-X irqs. A return of < 0 indicates a failure.
- * Or a return of > 0 indicates that driver request is exceeding the number
- * of irqs or MSI-X vectors available. Driver should use the returned value to
- * re-send its request.
**/
int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec)
{
@@ -975,7 +951,7 @@ int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec)
if (nr_entries < 0)
return nr_entries;
if (nvec > nr_entries)
- return nr_entries;
+ return -EINVAL;
/* Check for any invalid entries */
for (i = 0; i < nvec; i++) {
--
1.7.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
