Hi Hans, Thanks for addressing the comment. Acked-by: AnandKumar.Santhanam@xxxxxxxx Regards Anand -----Original Message----- From: Hans Verkuil [mailto:hverkuil@xxxxxxxxx] Sent: Friday, July 26, 2013 10:14 PM To: linux-scsi@xxxxxxxxxxxxxxx Cc: Anand Kumar Santhanam; lindar_liu@xxxxxxxxx; Sangeetha Gnanasekaran; xjtuwjp@xxxxxxxxx Subject: [PATCHv2] pm80xx: fix Adaptec 71605H hang The IO command size is 128 bytes for these new controllers as opposed to 64 for the old 8001 controller. The Adaptec out-of-tree driver did this correctly. After comparing the two this turned out to be the crucial difference. So don't hardcode the IO command size, instead use pm8001_ha->iomb_size as that is the correct value for both old and new controllers. Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx # for v3.10 and up --- drivers/scsi/pm8001/pm8001_hwi.c | 4 ++-- drivers/scsi/pm8001/pm80xx_hwi.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 69dd49c..ce3f129d 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -221,7 +221,7 @@ static void init_default_table_values(struct pm8001_hba_info *pm8001_ha) pm8001_ha->main_cfg_tbl.pm8001_tbl.fatal_err_interrupt = 0x01; for (i = 0; i < PM8001_MAX_INB_NUM; i++) { pm8001_ha->inbnd_q_tbl[i].element_pri_size_cnt = - PM8001_MPI_QUEUE | (64 << 16) | (0x00<<30); + PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x00<<30); pm8001_ha->inbnd_q_tbl[i].upper_base_addr = pm8001_ha->memoryMap.region[IB + i].phys_addr_hi; pm8001_ha->inbnd_q_tbl[i].lower_base_addr = @@ -247,7 +247,7 @@ static void init_default_table_values(struct pm8001_hba_info *pm8001_ha) } for (i = 0; i < PM8001_MAX_OUTB_NUM; i++) { pm8001_ha->outbnd_q_tbl[i].element_size_cnt = - PM8001_MPI_QUEUE | (64 << 16) | (0x01<<30); + PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x01<<30); pm8001_ha->outbnd_q_tbl[i].upper_base_addr = pm8001_ha->memoryMap.region[OB + i].phys_addr_hi; pm8001_ha->outbnd_q_tbl[i].lower_base_addr = diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 302514d..e1c4896 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -275,7 +275,7 @@ static void init_default_table_values(struct pm8001_hba_info *pm8001_ha) for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) { pm8001_ha->inbnd_q_tbl[i].element_pri_size_cnt = - PM8001_MPI_QUEUE | (64 << 16) | (0x00<<30); + PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x00<<30); pm8001_ha->inbnd_q_tbl[i].upper_base_addr = pm8001_ha->memoryMap.region[IB + i].phys_addr_hi; pm8001_ha->inbnd_q_tbl[i].lower_base_addr = @@ -301,7 +301,7 @@ static void init_default_table_values(struct pm8001_hba_info *pm8001_ha) } for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) { pm8001_ha->outbnd_q_tbl[i].element_size_cnt = - PM8001_MPI_QUEUE | (64 << 16) | (0x01<<30); + PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x01<<30); pm8001_ha->outbnd_q_tbl[i].upper_base_addr = pm8001_ha->memoryMap.region[OB + i].phys_addr_hi; pm8001_ha->outbnd_q_tbl[i].lower_base_addr = -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
