Re: [PATCH 1/1] scsi: ufs: Add support for sending NOP OUT UPIU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 5/2/2013 12:57 PM, Santosh Y wrote:
+
+/**
+ * ufshcd_validate_dev_connection() - Check device connection status
+ * @hba: per-adapter instance
+ *
+ * Send NOP OUT UPIU and wait for NOP IN response to check whether the
+ * device Transport Protocol (UTP) layer is ready after a reset.
+ * If the UTP layer at the device side is not initialized, it may
+ * not respond with NOP IN UPIU within timeout of %NOP_OUT_TIMEOUT
+ * and we retry sending NOP OUT for %NOP_OUT_RETRIES iterations.
+ */
+static int ufshcd_validate_dev_connection(struct ufs_hba *hba)
+{
+       int err;
+       struct ufshcd_lrb *lrbp;
+       unsigned long timeout;
+       unsigned long flags;
+       struct completion wait;
+       int retries = NOP_OUT_RETRIES;
+
+retry:
+       spin_lock_irqsave(hba->host->host_lock, flags);
+       lrbp = &hba->lrb[INTERNAL_CMD_TAG];
+       init_completion(&wait);
+
+       err = ufshcd_compose_nop_out_upiu(hba, lrbp);
+       if (err)
+               goto may_retry;
+
+       lrbp->completion = &wait;
+       ufshcd_send_command(hba, INTERNAL_CMD_TAG);
+       spin_unlock_irqrestore(hba->host->host_lock, flags);
+
+       timeout = wait_for_completion_timeout(
+                       &wait, msecs_to_jiffies(NOP_OUT_TIMEOUT));
+
+       spin_lock_irqsave(hba->host->host_lock, flags);
+       if (timeout > 0) {
+               int ocs;
+
+               ocs = ufshcd_get_tr_ocs(lrbp);
+               switch (ocs) {
+               case OCS_SUCCESS:
+                       goto out;
+               default:
+                       dev_dbg(hba->dev, "%s: OCS error %d\n", __func__, ocs);
+                       err = -EIO;
+                       goto may_retry;
+               }
+       } else {
+               u32 reg;
+
+               err = -ETIMEDOUT;
+
+               /* clear outstanding transaction before retry */
+               ufshcd_utrl_clear(hba, INTERNAL_CMD_TAG);
+               __clear_bit(INTERNAL_CMD_TAG, &hba->outstanding_reqs);
+
+               /* poll for max. 1 sec to clear door bell register by h/w */
+               spin_unlock_irqrestore(hba->host->host_lock, flags);
+               if (readl_poll_timeout(
+                               hba->mmio_base + REG_UTP_TRANSFER_REQ_DOOR_BELL,
+                               reg, !(reg & INTERNAL_CMD_TAG), 1000, 1000))

Condition is always true here, change it to !(reg & (1 << INTERNAL_CMD_TAG)).

Good catch. I will update.


+                       retries = 0;
+               spin_lock_irqsave(hba->host->host_lock, flags);
+               goto may_retry;
+       }
+




--
Regards,
Sujit
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux