On Thu, May 2, 2013 at 1:36 PM, Santosh Y <santoshsy@xxxxxxxxx> wrote: >> +/* >> + * drivers/scsi/ufs/ufs-attrs.h >> + * >> + * Copyright (C) 2013 Samsung Electronics Co., Ltd. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License as published by >> + * the Free Software Foundation; either version 2 of the License, or >> + * (at your option) any later version. >> + */ >> + >> +#ifndef _UFS_ATTRS_H_ >> +#define _UFS_ATTRS_H_ >> + >> +/* >> + * PHY Adpater attributes >> + */ >> +#define PA_ACTIVETXDATALANES 0x1560 >> +#define PA_ACTIVERXDATALANES 0x1580 >> +#define PA_TXTRAILINGCLOCKS 0x1564 >> +#define PA_PHY_TYPE 0x1500 >> +#define PA_AVAILTXDATALANES 0x1520 >> +#define PA_AVAILRXDATALANES 0x1540 >> +#define PA_MINRXTRAILINGCLOCKS 0x1543 >> +#define PA_TXPWRSTATUS 0x1567 >> +#define PA_RXPWRSTATUS 0x1582 >> +#define PA_TXFORCECLOCK 0x1562 >> +#define PA_TXPWRMODE 0x1563 >> +#define PA_LEGACYDPHYESCDL 0x1570 >> +#define PA_MAXTXSPEEDFAST 0x1521 >> +#define PA_MAXTXSPEEDSLOW 0x1522 >> +#define PA_MAXRXSPEEDFAST 0x1541 >> +#define PA_MAXRXSPEEDSLOW 0x1542 >> +#define PA_TXLINKSTARTUPHS 0x1544 >> +#define PA_TXSPEEDFAST 0x1565 >> +#define PA_TXSPEEDSLOW 0x1566 >> +#define PA_REMOTEVERINFO 0x15A0 >> +#define PA_TXGEAR 0x1568 >> +#define PA_TXTERMINATION 0x1569 >> +#define PA_HSSERIES 0x156A >> +#define PA_PWRMODE 0x1571 >> +#define PA_RXGEAR 0x1583 >> +#define PA_RXTERMINATION 0x1584 >> +#define PA_MAXRXPWMGEAR 0x1586 >> +#define PA_MAXRXHSGEAR 0x1587 >> +#define PA_RXHSUNTERMCAP 0x15A5 >> +#define PA_RXLSTERMCAP 0x15A6 >> +#define PA_PACPREQTIMEOUT 0x1590 >> +#define PA_PACPREQEOBTIMEOUT 0x1591 >> +#define PA_LOCALVERINFO 0x15A9 >> +#define PA_TACTIVATE 0x15A8 >> +#define PA_PACPFRAMECOUNT 0x15C0 >> +#define PA_PACPERRORCOUNT 0x15C1 >> +#define PA_PHYTESTCONTROL 0x15C2 >> +#define PA_PWRMODEUSERDATA0 0x15B0 >> +#define PA_PWRMODEUSERDATA1 0x15B1 >> +#define PA_PWRMODEUSERDATA2 0x15B2 >> +#define PA_PWRMODEUSERDATA3 0x15B3 >> +#define PA_PWRMODEUSERDATA4 0x15B4 >> +#define PA_PWRMODEUSERDATA5 0x15B5 >> +#define PA_PWRMODEUSERDATA6 0x15B6 >> +#define PA_PWRMODEUSERDATA7 0x15B7 >> +#define PA_PWRMODEUSERDATA8 0x15B8 >> +#define PA_PWRMODEUSERDATA9 0x15B9 >> +#define PA_PWRMODEUSERDATA10 0x15BA >> +#define PA_PWRMODEUSERDATA11 0x15BB >> +#define PA_CONNECTEDTXDATALANE 0x1561 >> +#define PA_CONNECTEDRXDATALANE 0x1581 >> +#define PA_LOGICALLANEMAP 0x15A1 >> +#define PA_SLEEPNOCONFIGTIME 0x15A2 >> +#define PA_STALLNOCONFIGTIME 0x15A3 >> +#define PA_SAVECONFIGTIME 0x15A4 >> + >> +/* >> + * Data Link Layer Attributes >> + */ >> +#define DL_TC0TXFCTHRESHOLD 0x2040 >> +#define DL_FC0PROTTIMEOUTVAL 0x2041 >> +#define DL_TC0REPLAYTIMEOUTVAL 0x2042 >> +#define DL_AFC0REQTIMEOUTVAL 0x2043 >> +#define DL_AFC0CREDITTHRESHOLD 0x2044 >> +#define DL_TC0OUTACKTHRESHOLD 0x2045 >> +#define DL_TC1TXFCTHRESHOLD 0x2060 >> +#define DL_FC1PROTTIMEOUTVAL 0x2061 >> +#define DL_TC1REPLAYTIMEOUTVAL 0x2062 >> +#define DL_AFC1REQTIMEOUTVAL 0x2063 >> +#define DL_AFC1CREDITTHRESHOLD 0x2064 >> +#define DL_TC1OUTACKTHRESHOLD 0x2065 >> +#define DL_TXPREEMPTIONCAP 0x2000 >> +#define DL_TC0TXMAXSDUSIZE 0x2001 >> +#define DL_TC0RXINITCREDITVAL 0x2002 >> +#define DL_TC0TXBUFFERSIZE 0x2005 >> +#define DL_PEERTC0PRESENT 0x2046 >> +#define DL_PEERTC0RXINITCREVAL 0x2047 >> +#define DL_TC1TXMAXSDUSIZE 0x2003 >> +#define DL_TC1RXINITCREDITVAL 0x2004 >> +#define DL_TC1TXBUFFERSIZE 0x2006 >> +#define DL_PEERTC1PRESENT 0x2066 >> +#define DL_PEERTC1RXINITCREVAL 0x2067 >> + >> +/* >> + * Network Layer Attributes >> + */ >> +#define N_DEVICEID 0x3000 >> +#define N_DEVICEID_VALID 0x3001 >> +#define N_TC0TXMAXSDUSIZE 0x3020 >> +#define N_TC1TXMAXSDUSIZE 0x3021 >> + >> +/* >> + * Transport Layer Attributes >> + */ >> +#define T_NUMCPORTS 0x4000 >> +#define T_NUMTESTFEATURES 0x4001 >> +#define T_CONNECTIONSTATE 0x4020 >> +#define T_PEERDEVICEID 0x4021 >> +#define T_PEERCPORTID 0x4022 >> +#define T_TRAFFICCLASS 0x4023 >> +#define T_PROTOCOLID 0x4024 >> +#define T_CPORTFLAGS 0x4025 >> +#define T_TXTOKENVALUE 0x4026 >> +#define T_RXTOKENVALUE 0x4027 >> +#define T_LOCALBUFFERSPACE 0x4028 >> +#define T_PEERBUFFERSPACE 0x4029 >> +#define T_CREDITSTOSEND 0x402A >> +#define T_CPORTMODE 0x402B >> +#define T_TC0TXMAXSDUSIZE 0x4060 >> +#define T_TC1TXMAXSDUSIZE 0x4061 >> + >> +#endif /* _UFS_ATTRS_H_ */ > > > These are Unipro. So change the name of the file to unipro.h > I meant Unipro attributes, So change the name accordingly. >> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c >> index 76ff332..55575ea 100644 >> --- a/drivers/scsi/ufs/ufshcd.c >> +++ b/drivers/scsi/ufs/ufshcd.c >> @@ -37,6 +37,7 @@ >> >> #define UFSHCD_ENABLE_INTRS (UTP_TRANSFER_REQ_COMPL |\ >> UTP_TASK_REQ_COMPL |\ >> + UFSHCD_HIBERNATE_MASK |\ >> UFSHCD_ERROR_MASK) >> #define UIC_CMD_TIMEOUT 100 >> >> @@ -188,6 +189,31 @@ static inline int ufshcd_get_uic_cmd_result(struct ufs_hba *hba) >> } >> > > > -- > ~Santosh -- ~Santosh -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
