sg_ses -j shows Transport protocol: Oxc not decoded

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

I have 3 boxes, each with an LSI 9211-8i and a mix of LSI expanders (Supermicro
SAS-846EL2, SAS-826EL2). For some of my expanders, 'sg_ses -j' (originally
sg3_utils 1.33, now 1.35) is showing:

Slot 24 [0,23]  Element type: Array device slot
  ...
  Additional Element Status:
    Transport protocol: Oxc not decoded

...where the slot contains a SATA device. It's always Slot 24, and other
slots show up fine. E.g. on one of the expanders with SATA drives in
both Slot 23 and 24:

h3# sg_ses -j /dev/sg81
  LSI       SAS2X36           0e0b
  Primary enclosure logical identifier (hex): 500304800013453f
...
Slot 23 [0,22]  Element type: Array device slot
  Enclosure Status:
    Predicted failure=0, Disabled=0, Swap=0, status: OK
    OK=0, Reserved device=0, Hot spare=0, Cons check=0
    In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0
    App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0
    Ready to insert=0, RMV=0, Ident=0, Report=0
    App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0
    Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0
  Additional Element Status:
    Transport protocol: SAS
    number of phys: 1, not all phys: 0, device slot number: 22
    phy index: 0
      device type: no device attached
      initiator port for:
      target port for: SATA_device
      attached SAS address: 0x500304800013453f
      SAS address: 0x5003048000134522
      phy identifier: 0x0
Slot 24 [0,23]  Element type: Array device slot
  Enclosure Status:
    Predicted failure=0, Disabled=0, Swap=0, status: OK
    OK=0, Reserved device=0, Hot spare=0, Cons check=0
    In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0
    App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0
    Ready to insert=0, RMV=0, Ident=0, Report=0
    App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0
    Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0
  Additional Element Status:
    Transport protocol: Oxc not decoded
...

This may be unrelated, but 'sg_ses -j' is also coming up with the
following error on 3 of the 6 expanders identified as "LSI SAS2X36 0e0b"
(this doesn't include any of the expanders with the Slot 24 problem):

join_work: oi=6, ei=255 (broken_ei=0) not in join_arr


The expander types are:

----------------------------------------------------------------------
$ for h in h1 h2 h3; do echo "=== $h ==="
  ssh $h 'lsscsi | grep enclosu'
done
=== h1 ===
[0:0:24:0]   enclosu LSI CORP SAS2X36          0717  -
[0:0:27:0]   enclosu LSI      SAS2X36          0e0b  -
[0:0:38:0]   enclosu LSI CORP SAS2X28          0717  -
[0:0:62:0]   enclosu LSI      SAS2X36          0e0b  -
[0:0:85:0]   enclosu LSI      SAS2X36          0e0b  -
=== h2 ===
[0:0:25:0]   enclosu LSI CORP SAS2X36          0717  -
[0:0:29:0]   enclosu LSI CORP SAS2X28          0717  -
=== h3 ===
[0:0:23:0]   enclosu LSI CORP SAS2X36          0717  -
[0:0:45:0]   enclosu LSI      SAS2X36          0e0b  -
[0:0:57:0]   enclosu LSI CORP SAS2X28          0717  -
[0:0:81:0]   enclosu LSI      SAS2X36          0e0b  -
[0:0:88:0]   enclosu LSI      SAS2X36          0e0b  -
----------------------------------------------------------------------

...and they're daisy-chained like this:

----------------------------------------------------------------------
for h in b2 b4 b5; do echo "=== $h ==="
  ssh $h 'find /sys/bus/scsi/devices/host0/ -name expander\* | egrep -v "bsg|sas_(expander|device)"' 
done
=== h1 ===
/sys/bus/scsi/devices/host0/port-0:0/expander-0:0
/sys/bus/scsi/devices/host0/port-0:0/expander-0:0/port-0:0:0/expander-0:1
/sys/bus/scsi/devices/host0/port-0:0/expander-0:0/port-0:0:0/expander-0:1/port-0:1:25/expander-0:4
/sys/bus/scsi/devices/host0/port-0:1/expander-0:2
/sys/bus/scsi/devices/host0/port-0:1/expander-0:2/port-0:2:0/expander-0:3
=== h2 ===
/sys/bus/scsi/devices/host0/port-0:0/expander-0:0
/sys/bus/scsi/devices/host0/port-0:1/expander-0:1
=== h3 ===
/sys/bus/scsi/devices/host0/port-0:0/expander-0:0
/sys/bus/scsi/devices/host0/port-0:0/expander-0:0/port-0:0:0/expander-0:1
/sys/bus/scsi/devices/host0/port-0:1/expander-0:2
/sys/bus/scsi/devices/host0/port-0:1/expander-0:2/port-0:2:0/expander-0:3
/sys/bus/scsi/devices/host0/port-0:1/expander-0:2/port-0:2:0/expander-0:3/port-0:3:0/expander-0:4
----------------------------------------------------------------------

(Sorry, I don't know how to relate the /sys/bus/scsi stuff to the scsi ids or
/dev/sgXX.)

The errors are showing up like:

----------------------------------------------------------------------
$ for h in h1 h2 h3; do
  ssh $h '
    for d in $(lsscsi -tg | awk "\$2 == \"enclosu\" { print \$5 }"); do
      echo "=== $(hostname):$d ==="
      sg_ses -j $d 2>&1 
    done
  '
done | egrep 'LSI|^=|^Slot 24|join_work|not decoded' | sed -r 's/^=/\n=/'

=== h1:/dev/sg24 ===
  LSI CORP  SAS2X36           0717
Slot 24 [0,23]  Element type: Array device slot

=== h1:/dev/sg27 ===
  LSI       SAS2X36           0e0b
Slot 24 [0,23]  Element type: Array device slot
    Transport protocol: Oxc not decoded

=== h1:/dev/sg38 ===
  LSI CORP  SAS2X28           0717

=== h1:/dev/sg62 ===
  LSI       SAS2X36           0e0b
Slot 24 [0,23]  Element type: Array device slot
    Transport protocol: Oxc not decoded

=== h1:/dev/sg81 ===
join_work: oi=6, ei=255 (broken_ei=0) not in join_arr
  LSI       SAS2X36           0e0b

=== h2:/dev/sg25 ===
  LSI CORP  SAS2X36           0717
Slot 24 [0,23]  Element type: Array device slot

=== h2:/dev/sg29 ===
  LSI CORP  SAS2X28           0717

=== h3:/dev/sg23 ===
  LSI CORP  SAS2X36           0717
Slot 24 [0,23]  Element type: Array device slot

=== h3:/dev/sg45 ===
join_work: oi=6, ei=255 (broken_ei=0) not in join_arr
  LSI       SAS2X36           0e0b

=== h3:/dev/sg57 ===
  LSI CORP  SAS2X28           0717

=== h3:/dev/sg81 ===
  LSI       SAS2X36           0e0b
Slot 24 [0,23]  Element type: Array device slot
    Transport protocol: Oxc not decoded

=== h3:/dev/sg88 ===
join_work: oi=6, ei=255 (broken_ei=0) not in join_arr
  LSI       SAS2X36           0e0b

----------------------------------------------------------------------

What should I be looking at, or what info I can provide to help track down
these issues?

Cheers,

Chris.
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux