>From ffe82b1efc42510239046909a7ac0aff10bb4162 Mon Sep 17 00:00:00 2001
From: Sakthivel K <Sakthivel.SaravananKamalRaju@xxxxxxxx>
Date: Tue, 19 Mar 2013 18:08:40 +0530
Subject: [PATCH V4 12/12] pm80xx: thermal, sas controller config and error handling update
Modified thermal configuration to happen after interrupt registration
Added SAS controller configuration during initialization
Added error handling logic to handle I_T_Nexus errors and variants
Signed-off-by: Anand Kumar S <AnandKumar.Santhanam@xxxxxxxx>
Ack-by: Jack Wang <jack_wang@xxxxxxxxx>
Ack-by: Hannes Reinecke <hare@xxxxxxx>
---
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/scsi/pm8001/pm8001_init.c | 2 +
drivers/scsi/pm8001/pm8001_sas.c | 66 ++++++++++++++++
drivers/scsi/pm8001/pm8001_sas.h | 2 +
drivers/scsi/pm8001/pm80xx_hwi.c | 150 +++++++++++++++++++++++++++++++++----
drivers/scsi/pm8001/pm80xx_hwi.h | 44 +++++++++++-
6 files changed, 249 insertions(+), 17 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index a90c002..d18f421 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1670,7 +1670,7 @@ void pm8001_work_fn(struct work_struct *work)
} break;
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
dev = pm8001_dev->sas_device;
- pm8001_I_T_nexus_reset(dev);
+ pm8001_I_T_nexus_event_handler(dev);
break;
case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
dev = pm8001_dev->sas_device;
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 055f7d0..1c71852 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -838,6 +838,8 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
if (pm8001_ha->chip_id != chip_8001) {
for (i = 1; i < pm8001_ha->number_of_intr; i++)
PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
+ /* setup thermal configuration. */
+ pm80xx_set_thermal_config(pm8001_ha);
}
pm8001_init_sas_add(pm8001_ha);
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index c720917..9af9585 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -1018,6 +1018,72 @@ int pm8001_I_T_nexus_reset(struct domain_device *dev)
return rc;
}
+/*
+* This function handle the IT_NEXUS_XXX event or completion
+* status code for SSP/SATA/SMP I/O request.
+*/
+int pm8001_I_T_nexus_event_handler(struct domain_device *dev)
+{
+ int rc = TMF_RESP_FUNC_FAILED;
+ struct pm8001_device *pm8001_dev;
+ struct pm8001_hba_info *pm8001_ha;
+ struct sas_phy *phy;
+ u32 device_id = 0;
+
+ if (!dev || !dev->lldd_dev)
+ return -1;
+
+ pm8001_dev = dev->lldd_dev;
+ device_id = pm8001_dev->device_id;
+ pm8001_ha = pm8001_find_ha_by_dev(dev);
+
+ PM8001_EH_DBG(pm8001_ha,
+ pm8001_printk("I_T_Nexus handler invoked !!"));
+
+ phy = sas_get_local_phy(dev);
+
+ if (dev_is_sata(dev)) {
+ DECLARE_COMPLETION_ONSTACK(completion_setstate);
+ if (scsi_is_sas_phy_local(phy)) {
+ rc = 0;
+ goto out;
+ }
+ /* send internal ssp/sata/smp abort command to FW */
+ rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
+ dev, 1, 0);
+ msleep(100);
+
+ /* deregister the target device */
+ pm8001_dev_gone_notify(dev);
+ msleep(200);
+
+ /*send phy reset to hard reset target */
+ rc = sas_phy_reset(phy, 1);
+ msleep(2000);
+ pm8001_dev->setds_completion = &completion_setstate;
+
+ wait_for_completion(&completion_setstate);
+ } else {
+ /* send internal ssp/sata/smp abort command to FW */
+ rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
+ dev, 1, 0);
+ msleep(100);
+
+ /* deregister the target device */
+ pm8001_dev_gone_notify(dev);
+ msleep(200);
+
+ /*send phy reset to hard reset target */
+ rc = sas_phy_reset(phy, 1);
+ msleep(2000);
+ }
+ PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n",
+ pm8001_dev->device_id, rc));
+out:
+ sas_put_local_phy(phy);
+
+ return rc;
+}
/* mandatory SAM-3, the task reset the specified LUN*/
int pm8001_lu_reset(struct domain_device *dev, u8 *lun)
{
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index ab30193..72d46ea 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -563,6 +563,7 @@ int pm8001_dev_found(struct domain_device *dev);
void pm8001_dev_gone(struct domain_device *dev);
int pm8001_lu_reset(struct domain_device *dev, u8 *lun);
int pm8001_I_T_nexus_reset(struct domain_device *dev);
+int pm8001_I_T_nexus_event_handler(struct domain_device *dev);
int pm8001_query_task(struct sas_task *task);
void pm8001_open_reject_retry(
struct pm8001_hba_info *pm8001_ha,
@@ -625,6 +626,7 @@ void pm8001_free_task(struct sas_task *task);
void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag);
struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha,
u32 device_id);
+int pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha);
int pm8001_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue);
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 3ac22e4..71954e8 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -613,7 +613,7 @@ static void init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
* pm80xx_set_thermal_config - support the thermal configuration
* @pm8001_ha: our hba card information.
*/
-static int
+int
pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha)
{
struct set_ctrl_cfg_req payload;
@@ -639,6 +639,86 @@ pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha)
}
/**
+* pm80xx_set_sas_protocol_timer_config - support the SAS Protocol
+* Timer configuration page
+* @pm8001_ha: our hba card information.
+*/
+static int
+pm80xx_set_sas_protocol_timer_config(struct pm8001_hba_info *pm8001_ha)
+{
+ struct set_ctrl_cfg_req payload;
+ struct inbound_queue_table *circularQ;
+ SASProtocolTimerConfig_t SASConfigPage;
+ int rc;
+ u32 tag;
+ u32 opc = OPC_INB_SET_CONTROLLER_CONFIG;
+
+ memset(&payload, 0, sizeof(struct set_ctrl_cfg_req));
+ memset(&SASConfigPage, 0, sizeof(SASProtocolTimerConfig_t));
+
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+
+ if (rc)
+ return -1;
+
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ payload.tag = cpu_to_le32(tag);
+
+ SASConfigPage.pageCode = SAS_PROTOCOL_TIMER_CONFIG_PAGE;
+ SASConfigPage.MST_MSI = 3 << 15;
+ SASConfigPage.STP_SSP_MCT_TMO = (STP_MCT_TMO << 16) | SSP_MCT_TMO;
+ SASConfigPage.STP_FRM_TMO = (SAS_MAX_OPEN_TIME << 24) |
+ (SMP_MAX_CONN_TIMER << 16) | STP_FRM_TIMER;
+ SASConfigPage.STP_IDLE_TMO = STP_IDLE_TIME;
+
+ if (SASConfigPage.STP_IDLE_TMO > 0x3FFFFFF)
+ SASConfigPage.STP_IDLE_TMO = 0x3FFFFFF;
+
+
+ SASConfigPage.OPNRJT_RTRY_INTVL = (SAS_MFD << 16) |
+ SAS_OPNRJT_RTRY_INTVL;
+ SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO = (SAS_DOPNRJT_RTRY_TMO << 16)
+ | SAS_COPNRJT_RTRY_TMO;
+ SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR = (SAS_DOPNRJT_RTRY_THR << 16)
+ | SAS_COPNRJT_RTRY_THR;
+ SASConfigPage.MAX_AIP = SAS_MAX_AIP;
+
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SASConfigPage.pageCode "
+ "0x%08x\n", SASConfigPage.pageCode));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SASConfigPage.MST_MSI "
+ " 0x%08x\n", SASConfigPage.MST_MSI));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SASConfigPage.STP_SSP_MCT_TMO "
+ " 0x%08x\n", SASConfigPage.STP_SSP_MCT_TMO));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SASConfigPage.STP_FRM_TMO "
+ " 0x%08x\n", SASConfigPage.STP_FRM_TMO));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SASConfigPage.STP_IDLE_TMO "
+ " 0x%08x\n", SASConfigPage.STP_IDLE_TMO));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SASConfigPage.OPNRJT_RTRY_INTVL "
+ " 0x%08x\n", SASConfigPage.OPNRJT_RTRY_INTVL));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO "
+ " 0x%08x\n", SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR "
+ " 0x%08x\n", SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR));
+ PM8001_INIT_DBG(pm8001_ha, pm8001_printk("SASConfigPage.MAX_AIP "
+ " 0x%08x\n", SASConfigPage.MAX_AIP));
+
+ memcpy(&payload.cfg_pg, &SASConfigPage,
+ sizeof(SASProtocolTimerConfig_t));
+
+ rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+
+ return rc;
+}
+
+/**
* pm80xx_get_encrypt_info - Check for encryption
* @pm8001_ha: our hba card information.
*/
@@ -800,11 +880,8 @@ static int pm80xx_chip_init(struct pm8001_hba_info *pm8001_ha)
} else
return -EBUSY;
- /* configure thermal */
- pm80xx_set_thermal_config(pm8001_ha);
-
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("Thermal configuration successful!\n"));
+ /* send SAS protocol timer configuration page to FW */
+ ret = pm80xx_set_sas_protocol_timer_config(pm8001_ha);
/* Check for encryption */
if (pm8001_ha->chip->encrypt) {
@@ -1269,6 +1346,11 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
ts->resp = SAS_TASK_COMPLETE;
@@ -1472,6 +1554,11 @@ static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
ts->resp = SAS_TASK_COMPLETE;
@@ -1557,6 +1644,13 @@ static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_OVERRUN;
break;
+ case IO_XFER_ERROR_INTERNAL_CRC_ERROR:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFR_ERROR_INTERNAL_CRC_ERROR\n"));
+ /* TBC: used default set values */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
case IO_XFER_CMD_FRAME_ISSUED:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_XFER_CMD_FRAME_ISSUED\n"));
@@ -1761,6 +1855,11 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
break;
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
ts->resp = SAS_TASK_COMPLETE;
@@ -2051,7 +2150,12 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
break;
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
- PM8001_IO_DBG(pm8001_ha,
+ case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
+ PM8001_FAIL_DBG(pm8001_ha,
pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_DEV_NO_RESPONSE;
@@ -2154,6 +2258,20 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_TO;
break;
+ case IO_XFER_ERROR_INTERNAL_CRC_ERROR:
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("IO_XFR_ERROR_INTERNAL_CRC_ERROR\n"));
+ /* TBC: used default set values */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_DMA_ACTIVATE_TIMEOUT:
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("IO_XFR_DMA_ACTIVATE_TIMEOUT\n"));
+ /* TBC: used default set values */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
default:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("Unknown status 0x%x\n", event));
@@ -2305,6 +2423,11 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
break;
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
ts->resp = SAS_TASK_COMPLETE;
@@ -2862,6 +2985,9 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
case HW_EVENT_PORT_RECOVERY_TIMER_TMO:
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("HW_EVENT_PORT_RECOVERY_TIMER_TMO\n"));
+ pm80xx_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_PORT_RECOVERY_TIMER_TMO,
+ port_id, phy_id, 0, 0);
sas_phy_disconnected(sas_phy);
phy->phy_attached = 0;
sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
@@ -3499,10 +3625,7 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_prio << 3);
ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_attr & 7);
memcpy(ssp_cmd.ssp_iu.cdb, task->ssp_task.cdb, 16);
- circularQ = &pm8001_ha->inbnd_q_tbl[inb++];
-
- /* rotate the inb queue */
- inb = inb%PM8001_MAX_SPCV_INB_NUM;
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
/* Check if encryption is set */
if (pm8001_ha->chip->encrypt &&
@@ -3603,10 +3726,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
unsigned long flags;
u32 opc = OPC_INB_SATA_HOST_OPSTART;
memset(&sata_cmd, 0, sizeof(sata_cmd));
- circularQ = &pm8001_ha->inbnd_q_tbl[inb++];
-
- /* rotate the inb queue */
- inb = inb%PM8001_MAX_SPCV_INB_NUM;
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
if (task->data_dir == PCI_DMA_NONE) {
ATAP = 0x04; /* no data*/
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
index 0c15627..ea127b6 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.h
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -197,6 +197,30 @@
#define CIPHER_MODE_XTS 0x00000002
#define KEK_MGMT_SUBOP_KEYCARDUPDATE 0x4
+/* SAS protocol timer configuration page */
+#define SAS_PROTOCOL_TIMER_CONFIG_PAGE 0x04
+#define STP_MCT_TMO 32
+#define SSP_MCT_TMO 32
+#define SAS_MAX_OPEN_TIME 5
+#define SMP_MAX_CONN_TIMER 0xFF
+#define STP_FRM_TIMER 0
+#define STP_IDLE_TIME 5 /* 5 us; controller default */
+#define SAS_MFD 0
+#define SAS_OPNRJT_RTRY_INTVL 2
+#define SAS_DOPNRJT_RTRY_TMO 128
+#define SAS_COPNRJT_RTRY_TMO 128
+
+/*
+ Making ORR bigger than IT NEXUS LOSS which is 2000000us = 2 second.
+ Assuming a bigger value 3 second, 3000000/128 = 23437.5 where 128
+ is DOPNRJT_RTRY_TMO
+*/
+#define SAS_DOPNRJT_RTRY_THR 23438
+#define SAS_COPNRJT_RTRY_THR 23438
+#define SAS_MAX_AIP 0x200000
+#define IT_NEXUS_TIMEOUT 0x7D0
+#define PORT_RECOVERY_TIMEOUT ((IT_NEXUS_TIMEOUT/100) + 30)
+
struct mpi_msg_hdr {
__le32 header; /* Bits [11:0] - Message operation code */
/* Bits [15:12] - Message Category */
@@ -996,6 +1020,23 @@ struct ssp_coalesced_comp_resp {
/* new outbound structure for spcv - ends */
+/* brief data structure for SAS protocol timer configuration page.
+ *
+ */
+struct SASProtocolTimerConfig{
+ __le32 pageCode; /* 0 */
+ __le32 MST_MSI; /* 1 */
+ __le32 STP_SSP_MCT_TMO; /* 2 */
+ __le32 STP_FRM_TMO; /* 3 */
+ __le32 STP_IDLE_TMO; /* 4 */
+ __le32 OPNRJT_RTRY_INTVL; /* 5 */
+ __le32 Data_Cmd_OPNRJT_RTRY_TMO; /* 6 */
+ __le32 Data_Cmd_OPNRJT_RTRY_THR; /* 7 */
+ __le32 MAX_AIP; /* 8 */
+} __attribute__((packed, aligned(4)));
+
+typedef struct SASProtocolTimerConfig SASProtocolTimerConfig_t;
+
#define NDS_BITS 0x0F
#define PDS_BITS 0xF0
@@ -1122,7 +1163,8 @@ struct ssp_coalesced_comp_resp {
#define IO_DS_INVALID 0x49
/* WARNING: the value is not contiguous from here */
#define IO_XFER_ERR_LAST_PIO_DATAIN_CRC_ERR 0x52
-#define IO_XFR_ERROR_INTERNAL_CRC_ERROR 0x54
+#define IO_XFER_DMA_ACTIVATE_TIMEOUT 0x53
+#define IO_XFER_ERROR_INTERNAL_CRC_ERROR 0x54
#define MPI_IO_RQE_BUSY_FULL 0x55
#define IO_XFER_ERR_EOB_DATA_OVERRUN 0x56
#define IO_XFR_ERROR_INVALID_SSP_RSP_FRAME 0x57
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
