Fix driver issues with SCSI Host reset
Signed-off-by: James Smart <james.smart@xxxxxxxxxx>
---
lpfc_attr.c | 7 ++++++-
lpfc_hw4.h | 2 +-
lpfc_init.c | 7 ++++++-
3 files changed, 13 insertions(+), 3 deletions(-)
diff -upNr a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
--- a/drivers/scsi/lpfc/lpfc_attr.c 2013-04-15 18:26:32.478041017 -0400
+++ b/drivers/scsi/lpfc/lpfc_attr.c 2013-04-15 18:26:36.982041119 -0400
@@ -674,6 +674,9 @@ lpfc_do_offline(struct lpfc_hba *phba, u
int i;
int rc;
+ if (phba->pport->fc_flag & FC_OFFLINE_MODE)
+ return 0;
+
init_completion(&online_compl);
rc = lpfc_workq_post_event(phba, &status, &online_compl,
LPFC_EVT_OFFLINE_PREP);
@@ -741,7 +744,8 @@ lpfc_selective_reset(struct lpfc_hba *ph
int status = 0;
int rc;
- if (!phba->cfg_enable_hba_reset)
+ if ((!phba->cfg_enable_hba_reset) ||
+ (phba->pport->fc_flag & FC_OFFLINE_MODE))
return -EACCES;
status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
@@ -895,6 +899,7 @@ lpfc_sli4_pdev_reg_request(struct lpfc_h
pci_disable_sriov(pdev);
phba->cfg_sriov_nr_virtfn = 0;
}
+
status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
if (status != 0)
diff -upNr a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
--- a/drivers/scsi/lpfc/lpfc_hw4.h 2013-04-10 16:46:40.000000000 -0400
+++ b/drivers/scsi/lpfc/lpfc_hw4.h 2013-04-15 18:26:36.984041120 -0400
@@ -621,7 +621,7 @@ struct lpfc_register {
#define lpfc_sliport_status_rdy_SHIFT 23
#define lpfc_sliport_status_rdy_MASK 0x1
#define lpfc_sliport_status_rdy_WORD word0
-#define MAX_IF_TYPE_2_RESETS 1000
+#define MAX_IF_TYPE_2_RESETS 6
#define LPFC_CTL_PORT_CTL_OFFSET 0x408
#define lpfc_sliport_ctrl_end_SHIFT 30
diff -upNr a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
--- a/drivers/scsi/lpfc/lpfc_init.c 2013-04-15 18:26:32.483041017 -0400
+++ b/drivers/scsi/lpfc/lpfc_init.c 2013-04-15 18:26:36.988041120 -0400
@@ -7817,8 +7817,13 @@ lpfc_pci_function_reset(struct lpfc_hba
out:
/* Catch the not-ready port failure after a port reset. */
- if (num_resets >= MAX_IF_TYPE_2_RESETS)
+ if (num_resets >= MAX_IF_TYPE_2_RESETS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3317 HBA not functional: IP Reset Failed "
+ "after (%d) retries, try: "
+ "echo fw_reset > board_mode\n", num_resets);
rc = -ENODEV;
+ }
return rc;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
