From: Santosh Yaraganavi <santoshsy@xxxxxxxxx> UTP Transfer request list base registers UTRLBA and UTRLBAU must be assigned, lower-32 and upper-32 bits of UTRLD list physical base addresses respectively. Currently UTRLBAU is being assigned lower-32 bits of UTRLD physical base address. This will cause an issue with controllers that can support 64-bit addressing. This patch correctly assigns upper-32 bits of UTRLD physical base address to UTRLBAU. Reported-by: Rene De Jong <rene.dejong@xxxxxxx> Signed-off-by: Santosh Yaraganavi <santoshsy@xxxxxxxxx> Reviewed-by: Vinayak Holikatti <vinholikatti@xxxxxxxxx> --- drivers/scsi/ufs/ufshcd.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 52b96e8..ea32ade 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -1032,11 +1032,11 @@ static int ufshcd_initialize_hba(struct ufs_hba *hba) return -EIO; /* Configure UTRL and UTMRL base address registers */ - writel(hba->utrdl_dma_addr, - (hba->mmio_base + REG_UTP_TRANSFER_REQ_LIST_BASE_L)); writel(lower_32_bits(hba->utrdl_dma_addr), + (hba->mmio_base + REG_UTP_TRANSFER_REQ_LIST_BASE_L)); + writel(upper_32_bits(hba->utrdl_dma_addr), (hba->mmio_base + REG_UTP_TRANSFER_REQ_LIST_BASE_H)); - writel(hba->utmrdl_dma_addr, + writel(lower_32_bits(hba->utmrdl_dma_addr), (hba->mmio_base + REG_UTP_TASK_REQ_LIST_BASE_L)); writel(upper_32_bits(hba->utmrdl_dma_addr), (hba->mmio_base + REG_UTP_TASK_REQ_LIST_BASE_H)); -- 1.7.5.4 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html