The patch contains the usual assortment of driver updates (lpfc,
qla2xxx, qla4xxx, bfa, bnx2fc, bnx2i, isci, fcoe, hpsa) plus a huge
amount of infrastructure work in the SAS library and transport class as
well as an iSCSI update. There's also a new SCSI based virtio driver.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git scsi-misc
The short changelog is
Akinobu Mita (1):
hpsa: use find_first_zero_bit
Andrew Morton (1):
mpt2sas: spell "primitive" correctly in function prototype
Andrew Vasquez (6):
qla2xxx: Cache swl during fabric discovery.
qla2xxx: Reduce mbx-command timeout for Login/Logout requests.
qla2xxx: Prep zero-length BSG data-transfer requests.
qla2xxx: Perform implicit logout during rport tear-down.
qla2xxx: Use consistent DL mask for ELS/CT passthru requests.
qla2xxx: Use a valid enode-mac if none defined.
Andrzej Jakowski (1):
isci: improvements in driver unloading routine
Arun Easi (8):
qla2xxx: Avoid invalid request queue dereference for bad response packets.
qla2xxx: Stop iteration after first failure in *_id functions.
qla2xxx: Fix incorrect register access in qla2x00_start_iocbs().
qla2xxx: Handle device mapping changes due to device logout.
qla2xxx: Log messages to use correct vha.
qla2xxx: Add new message when a new loopid is assigned.
qla2xxx: Fix ql_dbg arguments.
qla2xxx: Handle change notifications based on switch scan results.
Bhanu Prakash Gollapudi (6):
libfc: Handle discovery failure during ctlr link down
libfc: Fix panic in fc_exch_recv
bnx2fc: Bumped version to 1.0.10
bnx2fc: NPIV ports go offline when interface is brought down & up
bnx2fc: Handle LOGO flooding from the target
bnx2fc: fix panic in bnx2fc_post_io_req
Chad Dupuis (8):
qla2xxx: Add ha->max_fibre_devices to keep track of the maximum number of targets.
qla2xxx: Update LICENSE.qla2xxx.
qla2xxx: Perform firmware dump procedure on mailbox command timeout.
qla2xxx: Use ql_log* #define's in ql_log() and ql_log_pci().
qla2xxx: Convert remaining printk's to ql_log format.
qla2xxx: Print mailbox command opcode and return code when a command times out.
qla2xxx: Handle failure cases during fabric_login
qla2xxx: Increase speed of flash access in ISP82xx adapters to improve firmware load speed.
Dan Carpenter (1):
qla2xxx: handle default case in qla2x00_request_firmware()
Dan Williams (54):
isci: improve phy event warnings
isci: debug, provide state-enum-to-string conversions
scsi_transport_sas: 'enable' phys on reset
libsas: don't recover end devices attached to disabled phys
libsas: fixup target_port_protocols for expanders that don't report sata
libsas: set attached device type and target protocols for local phys
libsas: revert ata srst
libsas: fix lifetime of SAS_HA_FROZEN
libsas: async ata scanning
libsas: restore scan order
libsas: delete device on sas address changed
libsas: let libata recover links that fail to transmit initial sig-fis
libsas: fix sas port naming
libsas: improve debug statements
libsas: fix sas_unregister_ports vs sas_drain_work
libsas: route local link resets through ata-eh
libsas: fix mixed topology recovery
libsas: close scsi_remove_target() vs libata-eh race
libsas: mark all domain devices gone if root port disappears
libsas: pre-clean commands that won the eh vs completion race
isci: remove IDEV_EH hack to disable "discovery-time" ata resets
isci: remove bus and reset handlers
isci: ->lldd_ata_check_ready handler
isci: stop interpreting ->lldd_lu_reset() as an ata soft-reset
isci: fix interpretation of "hard" reset
isci: kill isci_port->status
isci: kill iphy->isci_port lookups
libsas: don't recover 'gone' devices in sas_ata_hard_reset()
libsas: fix sas_find_local_phy(), take phy references
libsas: check for 'gone' expanders in smp_execute_task()
libsas: don't mark expanders as gone when a child device is removed
libsas: poll for ata device readiness after reset
libsas: async ata-eh
libsas: sas_phy_enable via transport_sas_phy_reset
libsas: execute transport link resets with libata-eh via host workqueue
libsas: perform sas-transport resets in shost->workq context
libsas: use libata-eh-reset for sata rediscovery fis transmit failures
libsas: defer SAS_TASK_NEED_DEV_RESET commands to libata
libsas: let libata handle command timeouts
libsas: fix timeout vs completion race
libsas: prevent double completion of scmds from eh
libsas: close error handling vs sas_ata_task_done() race
libsas: kill invocation of scsi_eh_finish_cmd from sas_ata_task_done
libsas: use ->set_dmamode to notify lldds of NCQ parameters
libsas: prevent domain rediscovery competing with ata error handling
libsas: convert dev->gone to flags
libsas: remove ata_port.lock management duties from lldds
libsas: introduce sas_drain_work()
libsas: convert ha->state to flags
libsas: replace event locks with atomic bitops
libsas: fix leak of dev->sata_dev.identify_[packet_]device
libsas: fix domain_device leak
libsas: kill sas_slave_destroy
libsas: remove unused ata_task_resp fields
Dave Jiang (1):
isci: T10 DIF support
Douglas Gilbert (1):
scsi_debug: GET LBA STATUS response length correction
Eddie Wai (1):
bnx2i: Fixed the override of the error_mask module param
Eric Dumazet (1):
bnx2i: use kthread_create_on_node()
Giridhar Malavali (4):
qla2xxx: Change the log message when previous dump is available to retrieve for ISP82xx.
qla2xxx: Consolidation of SRB processing.
qla2xxx: Enhancements to support ISP83xx.
qla2xxx: Enhanced the dump routines to capture multiple request and response queues.
James Smart (7):
lpfc 8.3.29: Update driver version to 8.3.29
lpfc 8.3.29: Remove GFP_KERNEL allocation while lock is held
lpfc 8.3.29: Locking fix and Memory leak Fixes
lpfc 8.3.29: FC Discovery state machine fixes
lpfc 8.3.29: T10 Diff fixes and enhancements
lpfc 8.3.29: SLI related fixes
lpfc 8.3.29: BSG and User interface fixes
Jeff Skirvin (2):
libsas: add mutex for SMP task execution
libsas: Remove redundant phy state notification calls.
Jesper Juhl (1):
bfa: don't leak mem in bfad_im_bsg_els_ct_request()
Jing Huang (1):
bfa: add readme file
Joe Carnuccio (3):
qla2xxx: Remove EDC sysfs interface.
qla2xxx: Return blank sysfs string on initial get thermal failure.
qla2xxx: Correct print format for edc ql_log() calls.
Lalit Chandivade (3):
qla4xxx: Remove un-necessary print statment
qla4xxx: Fix verify boot idx correctly
qla4xxx: Fix un-necessary delay on invalid DDB
Maciej Trela (1):
libsas: kill spurious sas_put_device
Mahesh Rajashekhara (1):
aacraid: Added Sync.mode to support series 7/8/9 controllers
Manish Rangankar (2):
qla4xxx: Add support for multiple session per host.
qla4xxx: Modified debug log messages for boot info.
Marcin Tomczak (1):
isci: enable clock gating
Mark Salyzyn (3):
pm8001: deficient responses to IO_XFER_ERROR_BREAK and IO_XFER_OPEN_RETRY_TIMEOUT
pm8001: Add FUNC_GET_EVENTS
pm8001: fix lockup on phy_control hard reset.
Martin K. Petersen (3):
Handle disk devices which can not process medium access commands
sd: Make sure provisioning mode is reported correctly
Ensure discard failure gets treated as a target problem
Mike Christie (5):
qla4xxx: Export CHAP index as sysfs attribute
scsi_transport: Export CHAP index as sysfs attribute
libiscsi: fix cmd timeout/completion race
libiscsi_tcp: fix max_r2t manipulation
iscsi: fix setting of pid from netlink skb
Mike Snitzer (1):
scsi_error: classify some ILLEGAL_REQUEST sense as a permanent TARGET_ERROR
Moger, Babu (2):
fix the new host byte settings (DID_TARGET_FAILURE and DID_NEXUS_FAILURE)
Correctly set the scsi host/msg/status bytes
Neerav Parikh (7):
fcoe: Allow exposing FDMI attributes via sysfs
fcoe: Allow exposing FDMI attributes via sysfs
fcoe: Add support for FDMI in fcoe
libfc: Add support for FDMI
libfc: Make the libfc Common Transport(CT) code generic
scsi_transport_fc: Getting FC Port Speed in sync with FC-GS
scsi_transport_fc: Add FDMI host attributes
Nilesh Javali (2):
qla4xxx: Add support to display CHAP list and delete CHAP entry
iscsi_transport: Add support to display CHAP list and delete CHAP entry
Oliver Neukum (1):
st: implement PM
Paolo Bonzini (1):
virtio-scsi: SCSI driver for QEMU based virtual machines
Robert Love (4):
fcoe: Remove reference counting on 'stuct fcoe_interface'
fcoe: Do not switch context in vport_delete callback
fcoe: Rename out_nomod label to out_putmod
libfcoe: Don't KERN_ERR on netdev notification
Santosh Nayak (3):
pm8001: fix endian issue with code optimization.
pm8001: Fix possible racing condition.
pm8001: Fix bogus interrupt state flag issue.
Sasha Levin (1):
iscsi: don't hang in endless loop if no targets present
Scott Teel (3):
hpsa: update device attributes when they change
hpsa: improve naming on external target device functions
hpsa: eliminate 8 external target limitation
Stephen M. Cameron (7):
hpsa: refactor hpsa_figure_bus_target_lun
hpsa: make target and lun match what SCSI REPORT LUNs returns
hpsa: Fix problem with MSA2xxx devices
hpsa: factor out driver name
hpsa: combine hpsa_scsi_detect and hpsa_register_scsi
hpsa: removed unneeded structure member max_sg_entries and fix badly named constant MAXSGENTRIES
hpsa: fix per device memory leak on driver unload
Tomas Henzl (2):
hpsa: add some older controllers to the kdump blacklist
mpt2sas: add missing allocation check
Vikas Chaudhary (15):
qla4xxx: Update driver version to 5.02.00-k15
qla4xxx: trivial cleanup
qla4xxx: Fix sparse warning
qla4xxx: Update driver version to 5.02.00-k14
qla4xxx: Added ping support
iscsi_transport: Added Ping support
qla4xxx: added support for host event
scsi_transport_iscsi: added support for host event
qla4xxx: Proper detection of firmware abort error code for ISP82xx
qla4xxx: Remove unused code
qla4xxx: Update driver version to 5.02.00-k13
qla4xxx: Added support to show port_state and port_speed in sysfs
scsi_transport_iscsi: Added support to show port_state and port_speed in sysfs
qla4xxx: Added support to show targetalias in sysfs
libiscsi: Added support to show targetalias in sysfs
Wayne Boyer (1):
ipr: update PCI ID definitions for new adapters
and the diffstat:
Documentation/scsi/LICENSE.qla2xxx | 41 +-
Documentation/scsi/bfa.txt | 82 +++
Documentation/scsi/libsas.txt | 15 -
drivers/ata/libata-core.c | 34 +-
drivers/ata/libata-eh.c | 1 +
drivers/ata/libata-scsi.c | 13 +
drivers/ata/libata.h | 2 +-
drivers/scsi/Kconfig | 8 +
drivers/scsi/Makefile | 1 +
drivers/scsi/aacraid/aachba.c | 4 +
drivers/scsi/aacraid/aacraid.h | 27 +-
drivers/scsi/aacraid/comminit.c | 21 +-
drivers/scsi/aacraid/commsup.c | 26 +
drivers/scsi/aacraid/linit.c | 28 +-
drivers/scsi/aacraid/rx.c | 1 +
drivers/scsi/aacraid/sa.c | 1 +
drivers/scsi/aacraid/src.c | 293 ++++++--
drivers/scsi/aic94xx/aic94xx.h | 2 +
drivers/scsi/aic94xx/aic94xx_dev.c | 38 +-
drivers/scsi/aic94xx/aic94xx_init.c | 6 +-
drivers/scsi/aic94xx/aic94xx_tmf.c | 11 +-
drivers/scsi/bfa/bfad_bsg.c | 4 +-
drivers/scsi/bnx2fc/bnx2fc.h | 8 +-
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 20 +-
drivers/scsi/bnx2i/bnx2i_hwi.c | 12 +-
drivers/scsi/bnx2i/bnx2i_init.c | 9 +-
drivers/scsi/cxgbi/libcxgbi.c | 13 +-
drivers/scsi/fcoe/fcoe.c | 167 +++--
drivers/scsi/fcoe/fcoe.h | 3 -
drivers/scsi/fcoe/fcoe_transport.c | 4 +-
drivers/scsi/hpsa.c | 344 ++++-----
drivers/scsi/hpsa.h | 3 +-
drivers/scsi/hpsa_cmd.h | 9 +-
drivers/scsi/ipr.c | 14 +-
drivers/scsi/ipr.h | 4 +-
drivers/scsi/isci/host.c | 17 +-
drivers/scsi/isci/host.h | 19 +-
drivers/scsi/isci/init.c | 24 +-
drivers/scsi/isci/phy.c | 171 +++--
drivers/scsi/isci/phy.h | 155 ++--
drivers/scsi/isci/port.c | 263 +++----
drivers/scsi/isci/port.h | 114 ++-
drivers/scsi/isci/registers.h | 27 +-
drivers/scsi/isci/remote_device.c | 82 +--
drivers/scsi/isci/remote_device.h | 212 +++---
drivers/scsi/isci/remote_node_context.c | 19 +-
drivers/scsi/isci/remote_node_context.h | 97 ++-
drivers/scsi/isci/request.c | 370 +++++-----
drivers/scsi/isci/request.h | 228 +++---
drivers/scsi/isci/scu_task_context.h | 55 +-
drivers/scsi/isci/task.c | 158 +----
drivers/scsi/isci/task.h | 40 --
drivers/scsi/iscsi_tcp.c | 13 +-
drivers/scsi/libfc/fc_disc.c | 7 +
drivers/scsi/libfc/fc_elsct.c | 3 +-
drivers/scsi/libfc/fc_exch.c | 7 +-
drivers/scsi/libfc/fc_lport.c | 227 +++++-
drivers/scsi/libiscsi.c | 28 +-
drivers/scsi/libiscsi_tcp.c | 18 +
drivers/scsi/libsas/sas_ata.c | 828 +++++++++++-----------
drivers/scsi/libsas/sas_discover.c | 246 +++++--
drivers/scsi/libsas/sas_event.c | 96 ++-
drivers/scsi/libsas/sas_expander.c | 342 ++++++---
drivers/scsi/libsas/sas_host_smp.c | 11 +-
drivers/scsi/libsas/sas_init.c | 214 +++++-
drivers/scsi/libsas/sas_internal.h | 97 ++-
drivers/scsi/libsas/sas_phy.c | 12 +-
drivers/scsi/libsas/sas_port.c | 32 +-
drivers/scsi/libsas/sas_scsi_host.c | 364 ++++------
drivers/scsi/lpfc/lpfc.h | 13 +-
drivers/scsi/lpfc/lpfc_attr.c | 12 +-
drivers/scsi/lpfc/lpfc_bsg.c | 18 +-
drivers/scsi/lpfc/lpfc_crtn.h | 1 +
drivers/scsi/lpfc/lpfc_ct.c | 4 +-
drivers/scsi/lpfc/lpfc_debugfs.c | 19 +
drivers/scsi/lpfc/lpfc_els.c | 5 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 12 +-
drivers/scsi/lpfc/lpfc_hw.h | 5 +-
drivers/scsi/lpfc/lpfc_hw4.h | 49 +-
drivers/scsi/lpfc/lpfc_init.c | 137 +++-
drivers/scsi/lpfc/lpfc_nportdisc.c | 77 +-
drivers/scsi/lpfc/lpfc_scsi.c | 1178 ++++++++++++++++++++++++++-----
drivers/scsi/lpfc/lpfc_sli.c | 240 ++++---
drivers/scsi/lpfc/lpfc_sli.h | 1 +
drivers/scsi/lpfc/lpfc_sli4.h | 3 +-
drivers/scsi/lpfc/lpfc_version.h | 2 +-
drivers/scsi/mpt2sas/mpt2sas_base.c | 5 +
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 6 +-
drivers/scsi/mvsas/mv_init.c | 2 -
drivers/scsi/mvsas/mv_sas.c | 11 +-
drivers/scsi/pm8001/pm8001_chips.h | 4 +-
drivers/scsi/pm8001/pm8001_hwi.c | 434 +++++++++---
drivers/scsi/pm8001/pm8001_hwi.h | 2 +-
drivers/scsi/pm8001/pm8001_init.c | 2 -
drivers/scsi/pm8001/pm8001_sas.c | 127 +++-
drivers/scsi/pm8001/pm8001_sas.h | 6 +
drivers/scsi/qla2xxx/qla_attr.c | 177 +----
drivers/scsi/qla2xxx/qla_bsg.c | 120 ++--
drivers/scsi/qla2xxx/qla_dbg.c | 630 ++++++++++++++++-
drivers/scsi/qla2xxx/qla_dbg.h | 63 ++
drivers/scsi/qla2xxx/qla_def.h | 117 +--
drivers/scsi/qla2xxx/qla_dfs.c | 2 +-
drivers/scsi/qla2xxx/qla_fw.h | 13 +
drivers/scsi/qla2xxx/qla_gbl.h | 22 +-
drivers/scsi/qla2xxx/qla_gs.c | 86 ++-
drivers/scsi/qla2xxx/qla_init.c | 540 ++++++--------
drivers/scsi/qla2xxx/qla_inline.h | 51 +-
drivers/scsi/qla2xxx/qla_iocb.c | 167 +++--
drivers/scsi/qla2xxx/qla_isr.c | 445 +++++-------
drivers/scsi/qla2xxx/qla_mbx.c | 410 ++++++++---
drivers/scsi/qla2xxx/qla_mid.c | 2 +-
drivers/scsi/qla2xxx/qla_nx.c | 90 +--
drivers/scsi/qla2xxx/qla_nx.h | 3 +-
drivers/scsi/qla2xxx/qla_os.c | 435 ++++++++----
drivers/scsi/qla2xxx/qla_sup.c | 148 +++-
drivers/scsi/qla4xxx/ql4_def.h | 45 +-
drivers/scsi/qla4xxx/ql4_fw.h | 24 +
drivers/scsi/qla4xxx/ql4_glbl.h | 9 +
drivers/scsi/qla4xxx/ql4_init.c | 5 +
drivers/scsi/qla4xxx/ql4_iocb.c | 92 +++
drivers/scsi/qla4xxx/ql4_isr.c | 78 ++
drivers/scsi/qla4xxx/ql4_mbx.c | 23 +-
drivers/scsi/qla4xxx/ql4_nx.c | 17 +-
drivers/scsi/qla4xxx/ql4_nx.h | 1 +
drivers/scsi/qla4xxx/ql4_os.c | 563 ++++++++++++++-
drivers/scsi/qla4xxx/ql4_version.h | 2 +-
drivers/scsi/scsi.c | 6 -
drivers/scsi/scsi_debug.c | 6 +-
drivers/scsi/scsi_error.c | 24 +-
drivers/scsi/scsi_lib.c | 5 +-
drivers/scsi/scsi_transport_fc.c | 30 +-
drivers/scsi/scsi_transport_iscsi.c | 268 ++++++-
drivers/scsi/scsi_transport_sas.c | 60 +-
drivers/scsi/sd.c | 86 ++-
drivers/scsi/sd.h | 35 +
drivers/scsi/st.c | 11 +
drivers/scsi/virtio_scsi.c | 594 ++++++++++++++++
include/linux/libata.h | 2 +
include/linux/virtio_ids.h | 1 +
include/linux/virtio_scsi.h | 114 +++
include/scsi/fc/fc_ms.h | 213 ++++++
include/scsi/fc_encode.h | 363 +++++++++-
include/scsi/iscsi_if.h | 79 +++
include/scsi/libfc.h | 11 +
include/scsi/libiscsi.h | 3 +-
include/scsi/libiscsi_tcp.h | 2 +-
include/scsi/libsas.h | 71 +-
include/scsi/sas.h | 4 +-
include/scsi/sas_ata.h | 44 +-
include/scsi/scsi_cmnd.h | 12 +-
include/scsi/scsi_driver.h | 1 +
include/scsi/scsi_transport_fc.h | 32 +-
include/scsi/scsi_transport_iscsi.h | 22 +
include/scsi/scsi_transport_sas.h | 12 +-
154 files changed, 10314 insertions(+), 4417 deletions(-)
create mode 100644 Documentation/scsi/bfa.txt
create mode 100644 drivers/scsi/virtio_scsi.c
create mode 100644 include/linux/virtio_scsi.h
create mode 100644 include/scsi/fc/fc_ms.h
James
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
