[PATCH 7/7] sd: Use sd_ prefix for flush and discard functions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>

The commands to set up flush and discard operations used a scsi_ prefix
despite being local to the sd driver. Use an sd_ prefix instead.

Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Acked-by: Mike Snitzer <snitzer@xxxxxxxxxx>
---
 drivers/scsi/sd.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 26c33db..0c5c4b2 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -575,14 +575,14 @@ static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode)
 }
 
 /**
- * scsi_setup_discard_cmnd - unmap blocks on thinly provisioned device
+ * sd_setup_discard_cmnd - unmap blocks on thinly provisioned device
  * @sdp: scsi device to operate one
  * @rq: Request to prepare
  *
  * Will issue either UNMAP or WRITE SAME(16) depending on preference
  * indicated by target device.
  **/
-static int scsi_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq)
+static int sd_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq)
 {
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 	struct bio *bio = rq->bio;
@@ -733,7 +733,7 @@ static int sd_setup_write_same_cmnd(struct scsi_device *sdp, struct request *rq)
 	return scsi_setup_blk_pc_cmnd(sdp, rq);
 }
 
-static int scsi_setup_flush_cmnd(struct scsi_device *sdp, struct request *rq)
+static int sd_setup_flush_cmnd(struct scsi_device *sdp, struct request *rq)
 {
 	rq->timeout = SD_FLUSH_TIMEOUT;
 	rq->retries = SD_MAX_RETRIES;
@@ -776,13 +776,13 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 	 * block PC requests to make life easier.
 	 */
 	if (rq->cmd_flags & REQ_DISCARD) {
-		ret = scsi_setup_discard_cmnd(sdp, rq);
+		ret = sd_setup_discard_cmnd(sdp, rq);
 		goto out;
 	} else if (rq->cmd_flags & REQ_WRITE_SAME) {
 		ret = sd_setup_write_same_cmnd(sdp, rq);
 		goto out;
 	} else if (rq->cmd_flags & REQ_FLUSH) {
-		ret = scsi_setup_flush_cmnd(sdp, rq);
+		ret = sd_setup_flush_cmnd(sdp, rq);
 		goto out;
 	} else if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
 		ret = scsi_setup_blk_pc_cmnd(sdp, rq);
-- 
1.7.7.6

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux