Re: Kernel coredump about kblockd deadlock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



hi

2012/1/16 Jun'ichi Nomura <j-nomura@xxxxxxxxxxxxx>:
> Hi,
>
> On 01/15/12 23:45, loody wrote:
>> hi all:
>> 2012/1/15 loody <miloody@xxxxxxxxx>:
>>> Dear all:
>>> I use kernel 2.6.35.13 and cpu for mips
>>> When I plug in/out usb stick for several times I got following warning
>>> messages as I append at the end of mail.
>>>
>>> is it possible correlate to below issue
>>> http://thread.gmane.org/gmane.linux.kernel/1177383/focus=69879
>> I want to reproduce the issue of the thread above in my platform.
>> But I have no idea about:
>> 1  dm-multipath
>> 2. dm-round-robin
>>
>> are they additional module I need to download or it already include
>> kernel source?
>> if the later, which config I shout select?
>
> They are in kernel source (in drivers/md).
> You have to select CONFIG_BLK_DEV_DM and CONFIG_DM_MULTIPATH
> to enable them.
>
> To try reproducer in the thread, you also need "dmsetup"
> command, which is part of device-mapper utility.
>
>
>> Appreciate your help,
>>
>>>
>>>
>>> INFO: task kblockd/0:10 blocked for more than 120 seconds.
>>> "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>>> kblockd/0        D [87016a78] 802d1e48     0    10 0x00100000      2
>>>          11       9      (kernel thread)
>>> Stack : 00000001 80107148 8562ed80 800e9098 00000001 00000001 7fffffff 00000000
>>>        00000000 7fffffff 87053d38 ffffffff 87053d38 87053d28 872ff00c 802d1e48
>>>        00000001 00000009 00000102 80071c80 00005965 0056addf 00005965 00000001
>>>        00000000 00000000 7fffffff 80020c64 00000000 00000002 00000000 00000000
>>>        7fffffff 802d1ca8 00000000 80024538 00000004 0000000a 00000001 87016a78
>>>        ...
>>> Call Trace:
>>> [<802d1764>] schedule+0x648/0x70c from[<802d1e48>] schedule_timeout+0x30/0x324
>>> [<802d1e48>] schedule_timeout+0x30/0x324 from[<802d1ca8>]
>>> wait_for_common+0xf8/0x1c0
>>> [<802d1ca8>] wait_for_common+0xf8/0x1c0 from[<80044400>]
>>> __cancel_work_timer+0x188/0x210
>>> [<80044400>] __cancel_work_timer+0x188/0x210 from[<801a48c4>]
>>> blk_cleanup_queue+0x18/0x6c
>>> [<801a48c4>] blk_cleanup_queue+0x18/0x6c from[<802098f4>]
>>> scsi_device_dev_release_usercontext+0x174/0x1e4
>>> [<802098f4>] scsi_device_dev_release_usercontext+0x174/0x1e4
>>> from[<80043aa8>] execute_in_process_context+0x30/0x5c
>>> [<80043aa8>] execute_in_process_context+0x30/0x5c from[<801eeda8>]
>>> device_release+0x54/0x90
>>> [<801eeda8>] device_release+0x54/0x90 from[<801b0180>] kobject_release+0x70/0xa8
>>> [<801b0180>] kobject_release+0x70/0xa8 from[<801b17bc>] kref_put+0x80/0x98
>>> [<801b17bc>] kref_put+0x80/0x98 from[<80203c04>] scsi_request_fn+0x51c/0x61c
>>> [<80203c04>] scsi_request_fn+0x51c/0x61c from[<801a482c>]
>>> generic_unplug_device+0x38/0x7c
>>> [<801a482c>] generic_unplug_device+0x38/0x7c from[<80043e90>]
>>> worker_thread+0x1ec/0x2d4
>>> [<80043e90>] worker_thread+0x1ec/0x2d4 from[<800482c4>] kthread+0x7c/0x84
>>> [<800482c4>] kthread+0x7c/0x84 from[<80007818>] kernel_thread_helper+0x10/0x18
>>>
>>> -------------------------------------------------------------------------------------
>>> hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
>>> hub 1-0:1.0: port 1, status 0000, change 0001, 12 Mb/s
>>> usb 1-1: USB disconnect, address 35
>>> usb 1-1: unregistering device
>>> usb 1-1: unregistering interface 1-1:1.0
>>> usb 1-1: usb_disable_device nuking all URBs
>>> hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x0
>>> hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
>>> ehci-ehci ehci-ehci.0: GetStatus port 1 status 000803 sig=j CSC CONNECT
>>> hub 1-0:1.0: port 1, status 0401, change 0001, 480 Mb/s
>>> hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x401
>>> ehci-ehci ehci-ehci.0: port 1 high speed
>>> ehci-ehci ehci-ehci.0: GetStatus port 1 status 00000d sig=se0 PEC PE CONNECT
>>> usb 1-1: new high speed USB device using ehci-ehci and address 36
>>> ehci-ehci ehci-ehci.0: port 1 high speed
>>> ehci-ehci ehci-ehci.0: GetStatus port 1 status 00000d sig=se0 PEC PE CONNECT
>>> usb 1-1: default language 0x0409
>>> usb 1-1: udev 36, busnum 1, minor = 35
>
> --
> Jun'ichi Nomura, NEC Corporation
Sorry for late expressing my appreciation.
I didn't see your mail until now.

-- 
Regards,
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux