Re: Kernel coredump about kblockd deadlock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 01/15/12 23:45, loody wrote:
> hi all:
> 2012/1/15 loody <miloody@xxxxxxxxx>:
>> Dear all:
>> I use kernel 2.6.35.13 and cpu for mips
>> When I plug in/out usb stick for several times I got following warning
>> messages as I append at the end of mail.
>>
>> is it possible correlate to below issue
>> http://thread.gmane.org/gmane.linux.kernel/1177383/focus=69879
> I want to reproduce the issue of the thread above in my platform.
> But I have no idea about:
> 1  dm-multipath
> 2. dm-round-robin
> 
> are they additional module I need to download or it already include
> kernel source?
> if the later, which config I shout select?

They are in kernel source (in drivers/md).
You have to select CONFIG_BLK_DEV_DM and CONFIG_DM_MULTIPATH
to enable them.

To try reproducer in the thread, you also need "dmsetup"
command, which is part of device-mapper utility.


> Appreciate your help,
> 
>>
>>
>> INFO: task kblockd/0:10 blocked for more than 120 seconds.
>> "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>> kblockd/0        D [87016a78] 802d1e48     0    10 0x00100000      2
>>          11       9      (kernel thread)
>> Stack : 00000001 80107148 8562ed80 800e9098 00000001 00000001 7fffffff 00000000
>>        00000000 7fffffff 87053d38 ffffffff 87053d38 87053d28 872ff00c 802d1e48
>>        00000001 00000009 00000102 80071c80 00005965 0056addf 00005965 00000001
>>        00000000 00000000 7fffffff 80020c64 00000000 00000002 00000000 00000000
>>        7fffffff 802d1ca8 00000000 80024538 00000004 0000000a 00000001 87016a78
>>        ...
>> Call Trace:
>> [<802d1764>] schedule+0x648/0x70c from[<802d1e48>] schedule_timeout+0x30/0x324
>> [<802d1e48>] schedule_timeout+0x30/0x324 from[<802d1ca8>]
>> wait_for_common+0xf8/0x1c0
>> [<802d1ca8>] wait_for_common+0xf8/0x1c0 from[<80044400>]
>> __cancel_work_timer+0x188/0x210
>> [<80044400>] __cancel_work_timer+0x188/0x210 from[<801a48c4>]
>> blk_cleanup_queue+0x18/0x6c
>> [<801a48c4>] blk_cleanup_queue+0x18/0x6c from[<802098f4>]
>> scsi_device_dev_release_usercontext+0x174/0x1e4
>> [<802098f4>] scsi_device_dev_release_usercontext+0x174/0x1e4
>> from[<80043aa8>] execute_in_process_context+0x30/0x5c
>> [<80043aa8>] execute_in_process_context+0x30/0x5c from[<801eeda8>]
>> device_release+0x54/0x90
>> [<801eeda8>] device_release+0x54/0x90 from[<801b0180>] kobject_release+0x70/0xa8
>> [<801b0180>] kobject_release+0x70/0xa8 from[<801b17bc>] kref_put+0x80/0x98
>> [<801b17bc>] kref_put+0x80/0x98 from[<80203c04>] scsi_request_fn+0x51c/0x61c
>> [<80203c04>] scsi_request_fn+0x51c/0x61c from[<801a482c>]
>> generic_unplug_device+0x38/0x7c
>> [<801a482c>] generic_unplug_device+0x38/0x7c from[<80043e90>]
>> worker_thread+0x1ec/0x2d4
>> [<80043e90>] worker_thread+0x1ec/0x2d4 from[<800482c4>] kthread+0x7c/0x84
>> [<800482c4>] kthread+0x7c/0x84 from[<80007818>] kernel_thread_helper+0x10/0x18
>>
>> -------------------------------------------------------------------------------------
>> hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
>> hub 1-0:1.0: port 1, status 0000, change 0001, 12 Mb/s
>> usb 1-1: USB disconnect, address 35
>> usb 1-1: unregistering device
>> usb 1-1: unregistering interface 1-1:1.0
>> usb 1-1: usb_disable_device nuking all URBs
>> hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x0
>> hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
>> ehci-ehci ehci-ehci.0: GetStatus port 1 status 000803 sig=j CSC CONNECT
>> hub 1-0:1.0: port 1, status 0401, change 0001, 480 Mb/s
>> hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x401
>> ehci-ehci ehci-ehci.0: port 1 high speed
>> ehci-ehci ehci-ehci.0: GetStatus port 1 status 00000d sig=se0 PEC PE CONNECT
>> usb 1-1: new high speed USB device using ehci-ehci and address 36
>> ehci-ehci ehci-ehci.0: port 1 high speed
>> ehci-ehci ehci-ehci.0: GetStatus port 1 status 00000d sig=se0 PEC PE CONNECT
>> usb 1-1: default language 0x0409
>> usb 1-1: udev 36, busnum 1, minor = 35

-- 
Jun'ichi Nomura, NEC Corporation
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux