Re: [patch 1/2]scsi: scsi_run_queue() doesn't use local list to handle starved sdev

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2012-01-09 at 15:31 +0800, Shaohua Li wrote:
> On Fri, 2011-12-23 at 09:53 +0800, Shaohua Li wrote:
> > On Thu, 2011-12-22 at 19:17 -0600, James Bottomley wrote:
> > > On Fri, 2011-12-23 at 08:40 +0800, Shaohua Li wrote:
> > > > On Thu, 2011-12-22 at 18:27 +0000, James Bottomley wrote:
> > > > > On Thu, 2011-12-22 at 11:10 +0800, Shaohua Li wrote:
> > > > > > scsi_run_queue() picks off all sdev from host starved_list to a local list,
> > > > > > then handle them. If there are multiple threads running scsi_run_queue(),
> > > > > > the starved_list will get messed. This is quite common, because request
> > > > > > rq_affinity is on by default.
> > > > > > 
> > > > > > Signed-off-by: Shaohua Li <shaohua.li@xxxxxxxxx>
> > > > > > ---
> > > > > >  drivers/scsi/scsi_lib.c |   21 ++++++++++++++-------
> > > > > >  1 file changed, 14 insertions(+), 7 deletions(-)
> > > > > > 
> > > > > > Index: linux/drivers/scsi/scsi_lib.c
> > > > > > ===================================================================
> > > > > > --- linux.orig/drivers/scsi/scsi_lib.c	2011-12-21 16:56:23.000000000 +0800
> > > > > > +++ linux/drivers/scsi/scsi_lib.c	2011-12-22 09:33:09.000000000 +0800
> > > > > > @@ -401,9 +401,8 @@ static inline int scsi_host_is_busy(stru
> > > > > >   */
> > > > > >  static void scsi_run_queue(struct request_queue *q)
> > > > > >  {
> > > > > > -	struct scsi_device *sdev = q->queuedata;
> > > > > > +	struct scsi_device *sdev = q->queuedata, *head_sdev = NULL;
> > > > > >  	struct Scsi_Host *shost;
> > > > > > -	LIST_HEAD(starved_list);
> > > > > >  	unsigned long flags;
> > > > > >  
> > > > > >  	/* if the device is dead, sdev will be NULL, so no queue to run */
> > > > > > @@ -415,9 +414,8 @@ static void scsi_run_queue(struct reques
> > > > > >  		scsi_single_lun_run(sdev);
> > > > > >  
> > > > > >  	spin_lock_irqsave(shost->host_lock, flags);
> > > > > > -	list_splice_init(&shost->starved_list, &starved_list);
> > > > > >  
> > > > > > -	while (!list_empty(&starved_list)) {
> > > > > > +	while (!list_empty(&shost->starved_list)) {
> > > > > 
> > > > > The original reason for working from a copy instead of the original list
> > > > > was that the device can end up back on the starved list because of a
> > > > > variety of conditions in the HBA and so this would cause the loop not to
> > > > > exit, so this piece of the patch doesn't look right to me.
> > > > +               /*
> > > > +                * the head sdev is no longer starved and removed from the
> > > > +                * starved list, select a new sdev as head.
> > > > +                */
> > > > +               if (head_sdev == sdev && list_empty(&sdev->starved_entry))
> > > > +                       head_sdev = NULL;
> > > > I had this in the loop, which is to guarantee the loop will exit if a
> > > > device is removed from the starved list.
> > > 
> > > And the non-head sdevs? which can also get put back onto the list
> > yes, it will be put back to the list tail. Note we always handle the
> > head sdev first. move the cursor of list iterating to next dev and next,
> > we will hit head_sdev == sdev eventually, then the loop exit. or the
> > cursor isn't moving, which means we have scsi_host_is_busy(). in both
> > cases, the loop will exit.
> > 
> > > What's the reason for not just traversing the list once using list
> > > splice?
> > > 
> > > Basically, the changelog doesn't seem to explain what you're doing and
> > > the logic looks flawed.
> > The main reason is we have multiple CPU trying to get the list to its
> > local list and then handle it, then putback unprocessed entries back. we
> > have multiple cpu handles blk softirq, because request rq_affinity is on
> > default. And the putback always happen, because scsi_run_queue is called
> > after every request finish. When it's called, scsi_host has just one
> > free slot. The in-coordination of multiple threads handle of the starved
> > list will mess the list. I observed dev which doesn't get chance to
> > dispatch request is put to starved list tail, while dev which dispatches
> > request is still at head. eg, this will cause unfairness. This means
> > some devices will get starved.
> James,
> can you take a look at it? the two patches give 12% improvement in a
> simple file creation workload. I updated the patch log.

The exit criteria still don't look right to me.

given two devices on the starved list, s1 and s2.  First loop around
head_sdev is s1, we run the queue and it gets put back.  Now we loop to
s2.  as we drop the lock to run the queue, a competing thread gets in,
runs the starved loop and s1 gets removed.  We run s2, it gets put back,
but we don't see s1 is gone (since the sdev we're processing is s2 and
the check head_sdev == sdev fails) and it remains our head_sdev.  The
result is a loop until s2 gets removed, which would be highly
undesirable.

The problem essentially is that you're using local variables to track
what you've made a global list, so any other list manipulation external
to your local variables is invisible to you.  You can fix this by
checking list_empty(&head_sdev->starved_list) instead, but this will
still lead to running the starved list up to twice as much as we would
have previously.

It strikes me that a far better (and certainly easier to follow logic)
is to split the queue up for CPU affinity.  So the first pass instead of
splicing everything, it just takes all the unaffine requests plus all
those affine to that CPU, but leaves all those whose affinities don't
match the CPU on the global list (for any competing thread, which must
necessarily be on a different CPU, to process).

James

> Thanks,
> Shaohua
> 
> Subject: scsi: scsi_run_queue() doesn't use local list to handle starved sdev
> 
> scsi_run_queue() picks off all sdev from host starved_list to a local list,
> then handle them, and putback unprocessed entries back. we have multiple cpu
> handles blk softirq, because request rq_affinity is on by default. And the
> putback always happen, because scsi_run_queue() is called after every request
> finish. When it's called, scsi_host has just one free slot. The in-coordination
> of multiple threads handle of the starved list will mess the list. I observed
> dev which doesn't get chance to dispatch request is put to starved list tail,
> while dev which dispatches request successfully is still at head. This will
> cause unfairness, which means some devices will get starved.
> 
> Signed-off-by: Shaohua Li <shaohua.li@xxxxxxxxx>
> ---
>  drivers/scsi/scsi_lib.c |   25 +++++++++++++++----------
>  1 file changed, 15 insertions(+), 10 deletions(-)
> 
> Index: linux/drivers/scsi/scsi_lib.c
> ===================================================================
> --- linux.orig/drivers/scsi/scsi_lib.c	2011-12-23 10:21:22.000000000 +0800
> +++ linux/drivers/scsi/scsi_lib.c	2012-01-09 15:14:53.000000000 +0800
> @@ -401,9 +401,8 @@ static inline int scsi_host_is_busy(stru
>   */
>  static void scsi_run_queue(struct request_queue *q)
>  {
> -	struct scsi_device *sdev = q->queuedata;
> +	struct scsi_device *sdev = q->queuedata, *head_sdev = NULL;
>  	struct Scsi_Host *shost;
> -	LIST_HEAD(starved_list);
>  	unsigned long flags;
>  
>  	/* if the device is dead, sdev will be NULL, so no queue to run */
> @@ -415,9 +414,8 @@ static void scsi_run_queue(struct reques
>  		scsi_single_lun_run(sdev);
>  
>  	spin_lock_irqsave(shost->host_lock, flags);
> -	list_splice_init(&shost->starved_list, &starved_list);
>  
> -	while (!list_empty(&starved_list)) {
> +	while (!list_empty(&shost->starved_list)) {
>  		/*
>  		 * As long as shost is accepting commands and we have
>  		 * starved queues, call blk_run_queue. scsi_request_fn
> @@ -431,8 +429,13 @@ static void scsi_run_queue(struct reques
>  		if (scsi_host_is_busy(shost))
>  			break;
>  
> -		sdev = list_entry(starved_list.next,
> +		sdev = list_entry(shost->starved_list.next,
>  				  struct scsi_device, starved_entry);
> +		if (sdev == head_sdev)
> +			break;
> +		if (!head_sdev)
> +			head_sdev = sdev;
> +
>  		list_del_init(&sdev->starved_entry);
>  		if (scsi_target_is_busy(scsi_target(sdev))) {
>  			list_move_tail(&sdev->starved_entry,
> @@ -445,9 +448,13 @@ static void scsi_run_queue(struct reques
>  		__blk_run_queue(sdev->request_queue);
>  		spin_unlock(sdev->request_queue->queue_lock);
>  		spin_lock(shost->host_lock);
> +		/*
> +		 * the head sdev is no longer starved and removed from the
> +		 * starved list, select a new sdev as head.
> +		 */
> +		if (head_sdev == sdev && list_empty(&sdev->starved_entry))
> +			head_sdev = NULL;
>  	}
> -	/* put any unprocessed entries back */
> -	list_splice(&starved_list, &shost->starved_list);
>  	spin_unlock_irqrestore(shost->host_lock, flags);
>  
>  	blk_run_queue(q);
> @@ -1316,9 +1323,7 @@ static inline int scsi_target_queue_read
>  	}
>  
>  	if (scsi_target_is_busy(starget)) {
> -		if (list_empty(&sdev->starved_entry))
> -			list_add_tail(&sdev->starved_entry,
> -				      &shost->starved_list);
> +		list_move_tail(&sdev->starved_entry, &shost->starved_list);
>  		return 0;
>  	}
>  
> 
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux