Re: 2.6.39-rc3-git3 problem etc , reset-resistent problem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2011-04-16 06:22, werner wrote:
> 
> 
> Pls see the enclosed screen foto.
> 
> After the crashs of 2.6.39-rcX , which I already 
> reclaimed, and after -rc3-git4 and the patch suggested me 
> to try out, the computer in vesa grafic mode crashs 
> quickly, in fbdev only after longer time.     After this 
> crash, on re-booting, happens early during  the boot 
> process a next kind of  crash.   This don't go away on 
> reset nor on power off, i.e. booting 
> 2.6.39-rc3-git4-patchs  again, it repeats.    Only after 
> rebooting with 2.6.38.2 or another working kernel, one can 
> booting again with 2.6.39-rc3-git4-patchs -- until after 
> its next crash, when the same happens again.
> 
> Some of these secondary crashs show a message:   ata1: 
>  nv: stopping hardreset on occupied port,    and after 
> this the system attempts wrongly to understand the nv 
> grafic card as a hard disc, and claims about read errors, 
> until it crash.
> 
> Some of these secondary crashs, instead, look like the 
> enclosed foto, also understanding something wrongly as an 
> ata1 device.

Any chance you can setup a network console or serial console and capture
all of those messages?

-- 
Jens Axboe

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux