The following problem, with 2.6.38.3 gives the error
messages, and with 2.6.39-rc3-git6 let crash the laptop.
With 2.6.26.2 the same sistem boots normally.
(copy of dmesg, with error messages)
W.Landgraf
====================================
-0x007f]
pnp 00:08: disabling [io 0x0038-0x0039 disabled] because
it overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f]
pnp 00:08: disabling [io 0x003c-0x003d disabled] because
it overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f]
pnp 00:08: disabling [io 0x0050-0x0053 disabled] because
it overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f]
pnp 00:08: disabling [io 0x0063 disabled] because it
overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f]
pnp 00:08: disabling [io 0x0065 disabled] because it
overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f]
pnp 00:08: disabling [io 0x0072-0x0077 disabled] because
it overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f]
system 00:08: [io 0x01e0-0x01ef] has been reserved
system 00:08: [io 0x0480-0x048f] has been reserved
system 00:08: [io 0x0680-0x06ff] has been reserved
system 00:08: [io 0xd800-0xd87f] has been reserved
system 00:08: [io 0xd880-0xd89f] has been reserved
system 00:08: [io 0xe000-0xe07f] has been reserved
system 00:08: [io 0xe080-0xe0ff] has been reserved
system 00:08: [io 0xe400-0xe47f] has been reserved
system 00:08: [io 0xe480-0xe4ff] has been reserved
system 00:08: [io 0xe800-0xe87f] has been reserved
system 00:08: [io 0xe880-0xe8ff] has been reserved
system 00:08: [io 0xec00-0xec7f] has been reserved
system 00:08: [io 0xec80-0xecff] has been reserved
system 00:08: [io 0xeeb0-0xeebf] has been reserved
system 00:08: [io 0xeec0-0xeeff] has been reserved
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02
(active)
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
mdacon: MDA with 8K of memory detected.
Console: switching consoles 13-16 to MDA-2
Switching to clocksource acpi_pm
pci 0000:00:1e.0: BAR 15: assigned [mem
0x20000000-0x27ffffff pref]
pci 0000:00:1d.7: BAR 0: assigned [mem
0x28000000-0x280003ff]
pci 0000:00:1d.7: BAR 0: set to [mem
0x28000000-0x280003ff] (PCI address
[0x28000000-0x280003ff])
pci 0000:00:1f.5: BAR 2: assigned [mem
0x28000800-0x280009ff]
pci 0000:00:1f.5: BAR 2: set to [mem
0x28000800-0x280009ff] (PCI address
[0x28000800-0x280009ff])
pci 0000:00:1f.5: BAR 0: assigned [io 0x1000-0x10ff]
pci 0000:00:1f.5: BAR 0: set to [io 0x1000-0x10ff] (PCI
address [0x1000-0x10ff])
pci 0000:00:1f.5: BAR 3: assigned [mem
0x28000a00-0x28000aff]
pci 0000:00:1f.5: BAR 3: set to [mem
0x28000a00-0x28000aff] (PCI address
[0x28000a00-0x28000aff])
pci 0000:00:1f.6: BAR 0: assigned [io 0x1400-0x14ff]
pci 0000:00:1f.6: BAR 0: set to [io 0x1400-0x14ff] (PCI
address [0x1400-0x14ff])
pci 0000:00:1f.6: BAR 1: assigned [io 0x1800-0x187f]
pci 0000:00:1f.6: BAR 1: set to [io 0x1800-0x187f] (PCI
address [0x1800-0x187f])
pci 0000:00:1f.5: BAR 1: assigned [io 0x1880-0x18bf]
pci 0000:00:1f.5: BAR 1: set to [io 0x1880-0x18bf] (PCI
address [0x1880-0x18bf])
pci 0000:00:1d.0: BAR 4: assigned [io 0x18c0-0x18df]
pci 0000:00:1d.0: BAR 4: set to [io 0x18c0-0x18df] (PCI
address [0x18c0-0x18df])
pci 0000:00:1d.1: BAR 4: assigned [io 0x18e0-0x18ff]
pci 0000:00:1d.1: BAR 4: set to [io 0x18e0-0x18ff] (PCI
address [0x18e0-0x18ff])
pci 0000:00:1d.2: BAR 4: assigned [io 0x1c00-0x1c1f]
pci 0000:00:1d.2: BAR 4: set to [io 0x1c00-0x1c1f] (PCI
address [0x1c00-0x1c1f])
pci 0000:01:00.0: BAR 6: can't assign mem pref (size
0x20000)
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem
0xcf000000-0xcfffffff]
pci 0000:00:01.0: bridge window [mem
0xa0000000-0xafffffff pref]
pci 0000:02:09.0: BAR 0: assigned [mem
0x20000000-0x23ffffff pref]
pci 0000:02:09.0: BAR 0: set to [mem 0x20000000-0x23ffffff
pref] (PCI address [0x20000000-0x23ffffff])
pci 0000:02:0b.0: BAR 15: assigned [mem
0x24000000-0x27ffffff pref]
pci 0000:02:0b.0: BAR 16: assigned [mem
0x2c000000-0x2fffffff]
pci 0000:02:0b.2: BAR 1: assigned [mem
0xcee00000-0xcee03fff]
pci 0000:02:0b.2: BAR 1: set to [mem
0xcee00000-0xcee03fff] (PCI address
[0xcee00000-0xcee03fff])
pci 0000:02:0b.3: BAR 0: assigned [mem
0xcee04000-0xcee05fff]
pci 0000:02:0b.3: BAR 0: set to [mem
0xcee04000-0xcee05fff] (PCI address
[0xcee04000-0xcee05fff])
pci 0000:02:0b.0: BAR 0: assigned [mem
0xcee06000-0xcee06fff]
pci 0000:02:0b.0: BAR 0: set to [mem
0xcee06000-0xcee06fff] (PCI address
[0xcee06000-0xcee06fff])
pci 0000:02:0b.2: BAR 0: assigned [mem
0xcee07000-0xcee077ff]
pci 0000:02:0b.2: BAR 0: set to [mem
0xcee07000-0xcee077ff] (PCI address
[0xcee07000-0xcee077ff])
pci 0000:02:0b.0: BAR 13: assigned [io 0xc000-0xc0ff]
pci 0000:02:0b.0: BAR 14: assigned [io 0xc400-0xc4ff]
pci 0000:02:0b.4: BAR 0: assigned [mem
0xcee07800-0xcee078ff]
pci 0000:02:0b.4: BAR 0: set to [mem
0xcee07800-0xcee078ff] (PCI address
[0xcee07800-0xcee078ff])
pci 0000:02:0b.4: BAR 1: assigned [mem
0xcee07900-0xcee079ff]
pci 0000:02:0b.4: BAR 1: set to [mem
0xcee07900-0xcee079ff] (PCI address
[0xcee07900-0xcee079ff])
pci 0000:02:0b.4: BAR 2: assigned [mem
0xcee07a00-0xcee07aff]
pci 0000:02:0b.4: BAR 2: set to [mem
0xcee07a00-0xcee07aff] (PCI address
[0xcee07a00-0xcee07aff])
pci 0000:02:0b.0: CardBus bridge to [bus 03-03]
pci 0000:02:0b.0: bridge window [io 0xc000-0xc0ff]
pci 0000:02:0b.0: bridge window [io 0xc400-0xc4ff]
pci 0000:02:0b.0: bridge window [mem
0x24000000-0x27ffffff pref]
pci 0000:02:0b.0: bridge window [mem
0x2c000000-0x2fffffff]
pci 0000:00:1e.0: PCI bridge to [bus 02-04]
pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1e.0: bridge window [mem
0xcee00000-0xceefffff]
pci 0000:00:1e.0: bridge window [mem
0x20000000-0x27ffffff pref]
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:02:0b.0: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:02:0b.0: PCI INT A -> Link[LNKA] -> GSI 11
(level, low) -> IRQ 11
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0xcf000000-0xcfffffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff
pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xcee00000-0xceefffff]
pci_bus 0000:02: resource 2 [mem 0x20000000-0x27ffffff
pref]
pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:03: resource 0 [io 0xc000-0xc0ff]
pci_bus 0000:03: resource 1 [io 0xc400-0xc4ff]
pci_bus 0000:03: resource 2 [mem 0x24000000-0x27ffffff
pref]
pci_bus 0000:03: resource 3 [mem 0x2c000000-0x2fffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
TCP established hash table entries: 16384 (order: 5,
131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072
bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:01:00.0: Boot video device
pci 0000:02:08.0: Firmware left e100 interrupts enabled;
disabling
PCI: CLS 32 bytes, default 64
Simple Boot Flag at 0x7c set to 0x1
Machine check injector initialized
elanfreq: error: no Elan processor found!
cpufreq-nforce2: No nForce2 chipset.
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
apm: overridden by ACPI.
microcode: CPU0 sig=0x6d6, pf=0x20, revision=0x17
microcode: Microcode Update Driver: v2.00
<tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
scx200: NatSemi SCx200 Driver
audit: initializing netlink socket (disabled)
type=2000 audit(1302979948.433:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
DLM (built Apr 15 2011 02:33:33) installed
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering the id_resolver key type
FS-Cache: Netfs 'nfs' registered for caching
nfs4filelayout_init: NFSv4 File Layout Driver
Registering...
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
FS-Cache: Netfs 'cifs' registered for caching
NTFS driver 2.1.30 [Flags: R/W].
EFS: 1.0a - http://aeschi.ch.eu.org/efs/
JFFS2 version 2.2. (NAND) (SUMMARY) ÃÂ 2001-2006 Red Hat,
Inc.
ROMFS MTD (C) 2007 Red Hat, Inc.
QNX4 filesystem 0.2.3 registered.
fuse init (API version 7.16)
JFS: nTxBlock = 3874, nTxLock = 30994
SGI XFS with ACLs, security attributes, realtime, large
block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
NILFS version 2 loaded
BeFS version: 0.9.3
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
ocfs2: Registered cluster interface user
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
Btrfs loaded
GFS2 (built Apr 15 2011 02:35:04) installed
ceph: loaded (mds proto 32)
msgmni has been set to 968
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
cpqphp: Compaq Hot Plug PCI Controller Driver version:
0.9.8
ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6
pciehp: PCI Express Hot Plug Controller Driver version:
0.4
cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version:
0.2
cpcihp_generic: Generic port I/O CompactPCI Hot Plug
Driver version: 0.1
cpcihp_generic: not configured, disabling.
shpchp: Standard Hot Plug PCI Controller Driver version:
0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
Console: switching consoles 13-16 to MDA-2
nvidiafb 0000:01:00.0: power state changed by ACPI to D0
nvidiafb 0000:01:00.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
nvidiafb 0000:01:00.0: PCI INT A -> Link[LNKG] -> GSI 10
(level, low) -> IRQ 10
nvidiafb: Device ID: 10de0324
nvidiafb: CRTC0 analog not found
nvidiafb: CRTC1 analog not found
i2c i2c-0: unable to read EDID block.
i2c i2c-0: unable to read EDID block.
i2c i2c-0: unable to read EDID block.
i2c i2c-1: unable to read EDID block.
i2c i2c-1: unable to read EDID block.
i2c i2c-1: unable to read EDID block.
nvidiafb: CRTC 0 is currently programmed for DFP
nvidiafb: Using DFP on CRTC 0
nvidiafb: Panel size is 1024 x 768
nvidiafb: Panel is LVDS
nvidiafb: MTRR set to ON
fbcvt: 1024x768@60: CVT Name - .786M3-R
fbcon: NV32 (fb0) is primary device
nvidiafb: Flat panel dithering disabled
Console: switching to colour frame buffer device 128x48
nvidiafb: PCI nVidia NV32 framebuffer (64MB @ 0xA0000000)
VIA Graphics Intergration Chipset framebuffer 2.4
initializing
vmlfb: initializing
Could not find Carillo Ranch MCH device.
no IO addresses supplied
hgafb: HGA card not detected.
hgafb: probe of hgafb.0 failed with error -22
uvesafb: failed to execute /sbin/v86d
uvesafb: make sure that the v86d helper is installed and
executable
uvesafb: Getting VBE info block failed (eax=0x4f00,
err=-2)
uvesafb: vbe_init() failed with -22
uvesafb: probe of uvesafb.0 failed with error -22
vesafb: cannot reserve video memory at 0xa0000000
vesafb: framebuffer at 0xa0000000, mapped to 0xe5c00000,
using 3072k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:c240
vesafb: pmi: set display start = c00cc276, set palette =
c00cc2e0
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7
3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
fb1: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
checking generic (a0000000 4000000) vs hw (a0000 10000)
fb2: VGA16 VGA frame buffer device
ACPI: Deprecated procfs I/F for AC is loaded, please retry
with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ADP1] (on-line)
input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
[Firmware Bug]: ACPI: No _BQC method, cannot determine
initial brightness
acpi device:1a: registered as cooling_device0
input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:19/LNXVIDEO:00/input/input3
ACPI: Video Device [VGA] (multi-head: yes rom: yes post:
no)
ACPI: acpi_idle registered with cpuidle
Marking TSC unstable due to TSC halts in idle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (80 C)
ACPI: Deprecated procfs I/F for battery is loaded, please
retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT1] (battery present)
ERST: Table is not found!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial 0000:00:1f.6: power state changed by ACPI to D0
serial 0000:00:1f.6: power state changed by ACPI to D0
serial 0000:00:1f.6: enabling device (0000 -> 0001)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11
(level, low) -> IRQ 11
serial 0000:00:1f.6: PCI INT B disabled
Non-volatile memory driver v1.3
Toshiba System Management Mode driver v1.11 26/9/2001
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 855PM Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 256M @
0xb0000000
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to userspace modesetting.
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.26)
MM: desc_per_page = 128
nbd: registered device at major 43
usbcore: registered new interface driver ub
drbd: initialized. Version: 8.3.9 (api:88/proto:86-95)
drbd: built-in
drbd: registered as block device major 147
drbd: minor_table @ 0xdf601f80
rbd: loaded rbd (rados block device)
ibmasm: IBM ASM Service Processor Driver version 1.0
loaded
tifm_7xx1 0000:02:0b.3: enabling device (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
tifm_7xx1 0000:02:0b.3: PCI INT D -> Link[LNKD] -> GSI 11
(level, low) -> IRQ 11
Phantom Linux Driver, version n0.9.8, init OK
i2c-core: driver [isl29003] using legacy suspend method
i2c-core: driver [isl29003] using legacy resume method
Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo
Giometti
c2port c2port0: C2 port uc added
c2port c2port0: uc flash has 30 blocks x 512 bytes (15360
bytes total)
Driver for timberdale has been successfully registered.
i2c-core: driver [adp5520] using legacy suspend method
i2c-core: driver [adp5520] using legacy resume method
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x24ca rev 0x03)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PIIX_IDE 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11
(level, low) -> IRQ 11
piix 0000:00:1f.1: not 100% native mode: will probe irqs
later
ide0: BM-DMA at 0xbfa0-0xbfa7
ide1: BM-DMA at 0xbfa8-0xbfaf
Probing IDE interface ide0...
hda: TOSHIBA MK8032GAX, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
hdc: MATSHITADVD-RAM UJ-830S, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter
for probing all legacy ISA IDE ports
ide-gd driver 1.18
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB), CHS=16383/255/63
hda: cache flushes supported
hda: hda1
ide-cd driver 5.00
ide-cd: hdc: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive,
2048kB Cache
cdrom: Uniform CD-ROM driver Revision: 3.20
Loading iSCSI transport class v2.0-870.
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
fnic: Cisco FCoE HBA Driver, ver 1.4.0.145
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[26400]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3
loaded
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address
and IRQ using iobase= and irq= options
QLogic Fibre Channel HBA Driver: 8.03.05-k0
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.20
Copyright(c) 2004-2009 Emulex. All rights reserved.
Brocade BFA FC/FCOE SCSI driver - version: 2.3.2.3
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get
problems load
with "disable_clustering=1" and report to
maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03
EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST
2006)
megasas: 00.00.05.29-rc1 Tue. Dec. 7 17:00:00 PDT 2010
mpt2sas version 07.100.00.00 loaded
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux
v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux
v2.26.02.014.
ppa: Version 2.07 (for Linux 2.4.x)
imm: Version 2.05 (for Linux 2.4.0)
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.5.1
(August 10, 2010)
RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
stex: Promise SuperTrak EX Driver version: 4.6.0000.4
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits,
age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp
idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.6.2.2 (Nov 23,
2010)
iscsi: registered transport (bnx2i)
iscsi: registered transport (be2iscsi)
st: Version 20101219, fixed bufsize 32768, s/g segs 256
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp
$
SCSI Media Changer driver v0.25
osd: LOADED open-osd 0.2.0
Error: Driver 'pata_platform' is already registered,
aborting...
SSFDC read-only Flash Translation layer
mtdoops: mtd device (mtddev=name/number) must be supplied
L440GX flash mapping: failed to find PIIX4 ISA bridge,
cannot continue
device id = 2440
device id = 2480
device id = 24c0
device id = 24d0
device id = 25a1
device id = 2670
physmap-flash.0: failed to claim resource 0
SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff
NetSc520 flash device: 0x100000 at 0x200000
Failed to ioremap_nocache
Failed to ioremap_nocache
scx200_docflash: NatSemi SCx200 DOCCS Flash Driver
SNAPGEAR: failed to ioremap() ROMCS1
Generic platform RAM MTD, (c) 2004 Simtec Electronics
Possible DiskOnChip with unknown ChipID 50 found at
0xfffe0000
No recognised DiskOnChip devices found
slram: not enough parameters.
Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000
Nortel Networks.
pmc551: not detected
ftl_cs: FTL header not found.
Spectra MTD driver built on Apr 15 2011 @ 03:05:21
No valid DiskOnChip devices found
[nandsim] warning: read_byte: unexpected data output
cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output
cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output
cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output
cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output
cycle, state is STATE_READY return 0x0
[nandsim] warning: read_byte: unexpected data output
cycle, state is STATE_READY return 0x0
NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba
NAND 8MiB 1,8V 8-bit)
flash size: 8 MiB
page size: 512 bytes
OOB area size: 16 bytes
sector size: 8 KiB
pages number: 16384
pages per sector: 16
bus width: 8
bits in sector size: 13
bits in page size: 9
bits in OOB size: 4
flash size with OOB: 8448 KiB
page address bytes: 3
sector address bytes: 2
options: 0x62
Scanning device for bad blocks
Creating 1 MTD partitions on "NAND 8MiB 1,8V 8-bit":
0x000000000000-0x000000800000 : "NAND simulator partition
0"
ftl_cs: FTL header not found.
usbcore: registered new interface driver alauda
onenand_wait: timeout! ctrl=0x0000 intr=0x0000
OneNAND Manufacturer: Samsung (0xec)
OneNAND 16MB 1.8V 16-bit (0x04)
OneNAND version = 0x001e
Lock scheme is Continuous Lock
Scanning device for bad blocks
Creating 1 MTD partitions on "OneNAND simulator":
0x000000000000-0x000001000000 : "OneNAND simulator
partition"
ftl_cs: FTL header not found.
Fixed MDIO Bus: probed
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11
(level, low) -> IRQ 11
e100 0000:02:08.0: PME# disabled
e100 0000:02:08.0: eth0: addr 0xceefe000, irq 11, MAC addr
00:0e:7b:6b:67:0c
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.12 (Jan
03, 2011)
D-Link DE-620 pocket adapter not identified in the printer
port
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels,
max=256) (6 bit encapsulation enabled).
CSLIP: code copyright 1989 Regents of the University of
California.
SLIP linefill/keepalive option.
eth%d: D-Link DE-600 pocket adapter: not at I/O 0x378.
atp.c:v1.09=ac 2002/10/01 Donald Becker <becker@xxxxxxxxx>
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.18
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.18
Fusion MPT FC Host driver 3.04.18
Fusion MPT SAS Host driver 3.04.18
Fusion MPT misc device (ioctl) driver 3.04.18
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT LAN driver 3.04.18
firewire_ohci 0000:02:0b.2: enabling device (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
firewire_ohci 0000:02:0b.2: PCI INT C -> Link[LNKF] -> GSI
11 (level, low) -> IRQ 11
firewire_ohci: Added fw-ohci device 0000:02:0b.2, OHCI
v1.10, 4 IR + 8 IT contexts, quirks 0x2
yenta_cardbus 0000:02:0b.0: CardBus bridge found
[1179:0001]
yenta_cardbus 0000:02:0b.0: Using CSCINT to route CSC
interrupts to PCI
yenta_cardbus 0000:02:0b.0: Routing CardBus interrupts to
PCI
yenta_cardbus 0000:02:0b.0: TI: mfunc 0x01aa1b02, devctl
0x64
yenta_cardbus 0000:02:0b.0: ISA IRQ mask 0x00f8, PCI irq
11
yenta_cardbus 0000:02:0b.0: Socket status: 30000086
yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge
window: [io 0xc000-0xcfff]
pcmcia_socket pcmcia_socket0: cs: IO port probe
0xc000-0xcfff: excluding 0xc000-0xc0ff 0xc400-0xc4ff
0xcf00-0xcf3f
yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge
window: [mem 0xcee00000-0xceefffff]
pcmcia_socket pcmcia_socket0: cs: memory probe
0xcee00000-0xceefffff: excluding 0xcee00000-0xcee0ffff
0xceef0000-0xceefffff
yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge
window: [mem 0x20000000-0x27ffffff pref]
pcmcia_socket pcmcia_socket0: cs: memory probe
0x20000000-0x27ffffff: excluding 0x20000000-0x27ffffff
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
aoe: AoE v47 initialised.
paride: aten registered as protocol 0
paride: bpck registered as protocol 1
paride: comm registered as protocol 2
paride: dstr registered as protocol 3
paride: k951 registered as protocol 4
paride: k971 registered as protocol 5
paride: epat registered as protocol 6
paride: epia registered as protocol 7
paride: frpw registered as protocol 8
paride: friq registered as protocol 9
paride: fit2 registered as protocol 10
paride: fit3 registered as protocol 11
paride: on20 registered as protocol 12
paride: on26 registered as protocol 13
paride: ktti registered as protocol 14
bpck6: BACKPACK Protocol Driver V2.0.2
bpck6: Copyright 2001 by Micro Solutions, Inc., DeKalb IL.
USA
paride: bpck6 registered as protocol 15
pd: pd version 1.05, major 45, cluster 64, nice 0
pda: Autoprobe failed
pd: no valid drive found
pcd: pcd version 1.07, major 46, nice 0
pcd0: Autoprobe failed
pcd: No CD-ROM drive found
pf: pf version 1.04, major 47, cluster 64, nice 0
pf: No ATAPI disk detected
pt: pt version 1.04, major 96
pt0: Autoprobe failed
pt: No ATAPI tape drive detected
pg: pg version 1.02, major 97
pga: Autoprobe failed
pg: No ATAPI device detected
usbcore: registered new interface driver hwa-rc
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11
(level, low) -> IRQ 11
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not
supported
ehci_hcd 0000:00:1d.7: irq 11, io mem 0x28000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.38.3 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
driver isp1362-hcd, 2005-04-04
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11
(level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x000018c0
usb usb2: New USB device found, idVendor=1d6b,
idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.38.3 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11
(level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x000018e0
usb usb3: New USB device found, idVendor=1d6b,
idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.38.3 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11
(level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 4
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001c00
usb usb4: New USB device found, idVendor=1d6b,
idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.38.3 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
usbcore: registered new interface driver hwa-hc
usbcore: registered new interface driver wusb-cbaf
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB
modems and ISDN adapters
usbcore: registered new interface driver usblp
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver uas
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
parkbd: no such parport
mousedev: PS/2 mouse device common for all mice
i2c-core: driver [lm8323] using legacy suspend method
i2c-core: driver [lm8323] using legacy resume method
i2c-core: driver [max7359] using legacy suspend method
i2c-core: driver [max7359] using legacy resume method
usbcore: registered new interface driver appletouch
usbcore: registered new interface driver bcm5974
inport.c: Didn't find InPort mouse at 0x23c
logibm.c: Didn't find Logitech busmouse at 0x23c
i2c-core: driver [synaptics_i2c] using legacy suspend
method
i2c-core: driver [synaptics_i2c] using legacy resume
method
usbcore: registered new interface driver usb_acecad
acecad: v3.2:USB Acecad Flair tablet driver
usbcore: registered new interface driver aiptek
aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet
Driver (Linux 2.6.x)
aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene
van Paassen
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input4
usbcore: registered new interface driver gtco
GTCO usb driver version: 2.00.0006
usbcore: registered new interface driver hanwang
usbcore: registered new interface driver kbtab
kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
usbcore: registered new interface driver wacom
wacom: v1.52:USB Wacom tablet driver
mk712: device not present
usbcore: registered new interface driver usbtouchscreen
i2c-core: driver [ad714x_captouch] using legacy suspend
method
i2c-core: driver [ad714x_captouch] using legacy resume
method
i2c-core: driver [adxl34x] using legacy suspend method
i2c-core: driver [adxl34x] using legacy resume method
apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
usbcore: registered new interface driver ati_remote
ati_remote: 2.2.1:ATI/X10 RF USB Remote Control
usbcore: registered new interface driver ati_remote2
ati_remote2: ATI/Philips USB RF remote driver 0.3
cm109: Keymap for Komunikate KIP1000 phone loaded
usbcore: registered new interface driver cm109
cm109: CM109 phone driver: 20080805 (C) Alfred E.
Heggestad
usbcore: registered new interface driver keyspan_remote
input: PC Speaker as /devices/platform/pcspkr/input/input5
usbcore: registered new interface driver powermate
wistron_btns: System unknown
usbcore: registered new interface driver yealink
yealink: yld-20051230:Yealink phone driver
i2c /dev entries driver
lirc_dev: IR Remote Control driver registered, major 242
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR LIRC bridge handler initialized
Linux video capture interface: v2.00
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07)
initialised: dm-devel@xxxxxxxxxx
device-mapper: multipath: version 1.2.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
EDAC MC: Ver: 2.1.0 Apr 15 2011
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
EISA: Detected 0 cards.
cpuidle: using governor ladder
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:02:0b.4: SDHCI controller found [104c:8034]
(rev 0)
sdhci-pci 0000:02:0b.4: enabling device (0000 -> 0002)
sdhci-pci 0000:02:0b.4: PCI INT D -> Link[LNKD] -> GSI 11
(level, low) -> IRQ 11
_regulator_get: 0000:02:0b.4 supply vmmc not found, using
dummy regulator
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:02:0b.4] using DMA
_regulator_get: 0000:02:0b.4 supply vmmc not found, using
dummy regulator
------------[ cut here ]------------
WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0x83/0x95()
Hardware name: Qosmio E10
sysfs: cannot create duplicate filename
'/devices/pci0000:00/0000:00:1e.0/0000:02:0b.4/microamps_requested_vmmc'
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.38.3 #1
Call Trace:
[<c111ff03>] ? sysfs_add_one+0x83/0x95
[<c103cfc7>] ? warn_slowpath_common+0x7a/0x8f
[<c111ff03>] ? sysfs_add_one+0x83/0x95
[<c103d067>] ? warn_slowpath_fmt+0x33/0x35
[<c111ff03>] ? sysfs_add_one+0x83/0x95
[<c111f903>] ? sysfs_add_file_mode+0x4a/0x72
[<c111f943>] ? sysfs_add_file+0x18/0x1c
[<c111f9de>] ? sysfs_create_file+0x25/0x27
[<c1753adb>] ? device_create_file+0x18/0x1a
[<c165b957>] ? _regulator_get+0x224/0x3b7
[<c107a02f>] ? request_threaded_irq+0xb9/0xe5
[<c165bb0d>] ? regulator_get+0xf/0x11
[<c1c39b53>] ? sdhci_add_host+0x580/0x6cb
[<c156d3ec>] ? pci_ioremap_bar+0x5b/0x5f
[<c1da4754>] ? sdhci_pci_probe+0x339/0x3e2
[<c156d609>] ? local_pci_probe+0x41/0x85
[<c156e17e>] ? pci_device_probe+0x48/0x6b
[<c1755c6c>] ? driver_probe_device+0x9c/0x145
[<c156d5a3>] ? pci_match_device+0x96/0x9c
[<c1dbab2a>] ? _cond_resched+0x8/0x47
[<c1755d5d>] ? __driver_attach+0x48/0x64
[<c17555ad>] ? bus_for_each_dev+0x42/0x6c
[<c1755af5>] ? driver_attach+0x1e/0x20
[<c1755d15>] ? __driver_attach+0x0/0x64
[<c1754fc2>] ? bus_add_driver+0xc6/0x20a
[<c1755fef>] ? driver_register+0x98/0xf8
[<c1755fef>] ? driver_register+0x98/0xf8
[<c165d19a>] ? tty_register_driver+0x15e/0x1e2
[<c156e36b>] ? __pci_register_driver+0x3d/0x96
[<c1dba0d5>] ? printk+0x1d/0x1f
[<c23255b7>] ? sdhci_drv_init+0x14/0x16
[<c100117e>] ? do_one_initcall+0x8c/0x142
[<c1079038>] ? irq_to_desc+0x8/0x1e
[<c23255a3>] ? sdhci_drv_init+0x0/0x16
[<c22c4380>] ? kernel_init+0x101/0x19a
[<c22c427f>] ? kernel_init+0x0/0x19a
[<c1003b46>] ? kernel_thread_helper+0x6/0x10
---[ end trace 120ecbe82d809816 ]---
create_regulator: dummy: could not add regulator_dev
requested microamps sysfs entry
mmc1: no vmmc regulator found
firewire_core: created device fw0: GUID 000039000061e892,
S400
Registered led device: mmc1::
mmc1: SDHCI controller on PCI [0000:02:0b.4] using DMA
_regulator_get: 0000:02:0b.4 supply vmmc not found, using
dummy regulator
------------[ cut here ]------------
WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0x83/0x95()
Hardware name: Qosmio E10
sysfs: cannot create duplicate filename
'/devices/pci0000:00/0000:00:1e.0/0000:02:0b.4/microamps_requested_vmmc'
Modules linked in:
Pid: 1, comm: swapper Tainted: G W 2.6.38.3 #1
Call Trace:
[<c111ff03>] ? sysfs_add_one+0x83/0x95
[<c103cfc7>] ? warn_slowpath_common+0x7a/0x8f
[<c111ff03>] ? sysfs_add_one+0x83/0x95
[<c103d067>] ? warn_slowpath_fmt+0x33/0x35
[<c111ff03>] ? sysfs_add_one+0x83/0x95
[<c111f903>] ? sysfs_add_file_mode+0x4a/0x72
[<c111f943>] ? sysfs_add_file+0x18/0x1c
[<c111f9de>] ? sysfs_create_file+0x25/0x27
[<c1753adb>] ? device_create_file+0x18/0x1a
[<c165b957>] ? _regulator_get+0x224/0x3b7
[<c107a02f>] ? request_threaded_irq+0xb9/0xe5
[<c165bb0d>] ? regulator_get+0xf/0x11
[<c1c39b53>] ? sdhci_add_host+0x580/0x6cb
[<c156d3ec>] ? pci_ioremap_bar+0x5b/0x5f
[<c1da4754>] ? sdhci_pci_probe+0x339/0x3e2
[<c156d609>] ? local_pci_probe+0x41/0x85
[<c156e17e>] ? pci_device_probe+0x48/0x6b
[<c1755c6c>] ? driver_probe_device+0x9c/0x145
[<c156d5a3>] ? pci_match_device+0x96/0x9c
[<c1dbab2a>] ? _cond_resched+0x8/0x47
[<c1755d5d>] ? __driver_attach+0x48/0x64
[<c17555ad>] ? bus_for_each_dev+0x42/0x6c
[<c1755af5>] ? driver_attach+0x1e/0x20
[<c1755d15>] ? __driver_attach+0x0/0x64
[<c1754fc2>] ? bus_add_driver+0xc6/0x20a
[<c1755fef>] ? driver_register+0x98/0xf8
[<c1755fef>] ? driver_register+0x98/0xf8
[<c165d19a>] ? tty_register_driver+0x15e/0x1e2
[<c156e36b>] ? __pci_register_driver+0x3d/0x96
[<c1dba0d5>] ? printk+0x1d/0x1f
[<c23255b7>] ? sdhci_drv_init+0x14/0x16
[<c100117e>] ? do_one_initcall+0x8c/0x142
[<c1079038>] ? irq_to_desc+0x8/0x1e
[<c23255a3>] ? sdhci_drv_init+0x0/0x16
[<c22c4380>] ? kernel_init+0x101/0x19a
[<c22c427f>] ? kernel_init+0x0/0x19a
[<c1003b46>] ? kernel_thread_helper+0x6/0x10
---[ end trace 120ecbe82d809817 ]---
create_regulator: dummy: could not add regulator_dev
requested microamps sysfs entry
mmc2: no vmmc regulator found
Registered led device: mmc2::
mmc2: SDHCI controller on PCI [0000:02:0b.4] using DMA
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
via_sdmmc: VIA SD/MMC Card Reader driver (C) 2008 VIA
Technologies, Inc.
No iBFT detected.
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
XGIfb: Options (null)
dell-wmi: No known WMI GUID found
This machine doesn't have MSI-hotkeys through WMI
Topstar Laptop ACPI extras driver loaded
Detected Toshiba ACPI Bluetooth device - installing RFKill
handler
toshiba_bluetooth: Re-enabling Toshiba Bluetooth
oprofile: using NMI timer interrupt.
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 33
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
lib80211_crypt: registered algorithm 'WEP'
lib80211_crypt: registered algorithm 'CCMP'
lib80211_crypt: registered algorithm 'TKIP'
Registering the dns_resolver key type
libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5)
Using IPI No-Shortcut mode
psmouse serio1: ID: 73 02 14
usb 3-1: new low speed USB device using uhci_hcd and
address 2
usb 3-1: New USB device found, idVendor=04d9,
idProduct=1603
usb 3-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
usb 3-1: Product: USB Keyboard
usb 3-1: Manufacturer:
input: USB Keyboard as
/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input6
generic-usb 0003:04D9:1603.0001: input,hidraw0: USB HID
v1.10 Keyboard [ USB Keyboard] on
usb-0000:00:1d.1-1/input0
input: USB Keyboard as
/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input7
generic-usb 0003:04D9:1603.0002: input,hidraw1: USB HID
v1.10 Device [ USB Keyboard] on usb-0000:00:1d.1-1/input1
usb 3-2: new low speed USB device using uhci_hcd and
address 3
usb 3-2: New USB device found, idVendor=05e3,
idProduct=1205
usb 3-2: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
usb 3-2: Product: USB Mouse
input: USB Mouse as
/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input8
generic-usb 0003:05E3:1205.0003: input,hidraw2: USB HID
v1.10 Mouse [USB Mouse ] on
usb-0000:00:1d.1-2/input0
input: PS/2 Generic Mouse as
/devices/platform/i8042/serio1/input/input9
kAFS: Red Hat AFS client v0.1 registering.
FS-Cache: Netfs 'afs' registered for caching
raid6test: testing the 4-disk case...
raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D)
OK
raid6test: test_disks(0, 2): faila= 0(D) failb= 2(P)
OK
raid6test: test_disks(0, 3): faila= 0(D) failb= 3(Q)
OK
raid6test: test_disks(1, 2): faila= 1(D) failb= 2(P)
OK
raid6test: test_disks(1, 3): faila= 1(D) failb= 3(Q)
OK
raid6test: test_disks(2, 3): faila= 2(P) failb= 3(Q)
OK
raid6test: testing the 5-disk case...
raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D)
OK
raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D)
OK
raid6test: test_disks(0, 3): faila= 0(D) failb= 3(P)
OK
raid6test: test_disks(0, 4): faila= 0(D) failb= 4(Q)
OK
raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D)
OK
raid6test: test_disks(1, 3): faila= 1(D) failb= 3(P)
OK
raid6test: test_disks(1, 4): faila= 1(D) failb= 4(Q)
OK
raid6test: test_disks(2, 3): faila= 2(D) failb= 3(P)
OK
raid6test: test_disks(2, 4): faila= 2(D) failb= 4(Q)
OK
raid6test: test_disks(3, 4): faila= 3(P) failb= 4(Q)
OK
raid6test: testing the 11-disk case...
raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D)
OK
raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D)
OK
raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D)
OK
raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D)
OK
raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D)
OK
raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D)
OK
raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D)
OK
raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D)
OK
raid6test: test_disks(0, 9): faila= 0(D) failb= 9(P)
OK
raid6test: test_disks(0, 10): faila= 0(D) failb= 10(Q)
OK
raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D)
OK
raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D)
OK
raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D)
OK
raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D)
OK
raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D)
OK
raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D)
OK
raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D)
OK
raid6test: test_disks(1, 9): faila= 1(D) failb= 9(P)
OK
raid6test: test_disks(1, 10): faila= 1(D) failb= 10(Q)
OK
raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D)
OK
raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D)
OK
raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D)
OK
raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D)
OK
raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D)
OK
raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D)
OK
raid6test: test_disks(2, 9): faila= 2(D) failb= 9(P)
OK
raid6test: test_disks(2, 10): faila= 2(D) failb= 10(Q)
OK
raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D)
OK
raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D)
OK
raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D)
OK
raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D)
OK
raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D)
OK
raid6test: test_disks(3, 9): faila= 3(D) failb= 9(P)
OK
raid6test: test_disks(3, 10): faila= 3(D) failb= 10(Q)
OK
raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D)
OK
raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D)
OK
raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D)
OK
raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D)
OK
raid6test: test_disks(4, 9): faila= 4(D) failb= 9(P)
OK
raid6test: test_disks(4, 10): faila= 4(D) failb= 10(Q)
OK
raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D)
OK
raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D)
OK
raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D)
OK
raid6test: test_disks(5, 9): faila= 5(D) failb= 9(P)
OK
raid6test: test_disks(5, 10): faila= 5(D) failb= 10(Q)
OK
raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D)
OK
raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D)
OK
raid6test: test_disks(6, 9): faila= 6(D) failb= 9(P)
OK
raid6test: test_disks(6, 10): faila= 6(D) failb= 10(Q)
OK
raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D)
OK
raid6test: test_disks(7, 9): faila= 7(D) failb= 9(P)
OK
raid6test: test_disks(7, 10): faila= 7(D) failb= 10(Q)
OK
raid6test: test_disks(8, 9): faila= 8(D) failb= 9(P)
OK
raid6test: test_disks(8, 10): faila= 8(D) failb= 10(Q)
OK
raid6test: test_disks(9, 10): faila= 9(P) failb= 10(Q)
OK
raid6test: testing the 12-disk case...
raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D)
OK
raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D)
OK
raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D)
OK
raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D)
OK
raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D)
OK
raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D)
OK
raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D)
OK
raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D)
OK
raid6test: test_disks(0, 9): faila= 0(D) failb= 9(D)
OK
raid6test: test_disks(0, 10): faila= 0(D) failb= 10(P)
OK
raid6test: test_disks(0, 11): faila= 0(D) failb= 11(Q)
OK
raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D)
OK
raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D)
OK
raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D)
OK
raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D)
OK
raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D)
OK
raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D)
OK
raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D)
OK
raid6test: test_disks(1, 9): faila= 1(D) failb= 9(D)
OK
raid6test: test_disks(1, 10): faila= 1(D) failb= 10(P)
OK
raid6test: test_disks(1, 11): faila= 1(D) failb= 11(Q)
OK
raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D)
OK
raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D)
OK
raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D)
OK
raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D)
OK
raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D)
OK
raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D)
OK
raid6test: test_disks(2, 9): faila= 2(D) failb= 9(D)
OK
raid6test: test_disks(2, 10): faila= 2(D) failb= 10(P)
OK
raid6test: test_disks(2, 11): faila= 2(D) failb= 11(Q)
OK
raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D)
OK
raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D)
OK
raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D)
OK
raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D)
OK
raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D)
OK
raid6test: test_disks(3, 9): faila= 3(D) failb= 9(D)
OK
raid6test: test_disks(3, 10): faila= 3(D) failb= 10(P)
OK
raid6test: test_disks(3, 11): faila= 3(D) failb= 11(Q)
OK
raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D)
OK
raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D)
OK
raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D)
OK
raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D)
OK
raid6test: test_disks(4, 9): faila= 4(D) failb= 9(D)
OK
raid6test: test_disks(4, 10): faila= 4(D) failb= 10(P)
OK
raid6test: test_disks(4, 11): faila= 4(D) failb= 11(Q)
OK
raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D)
OK
raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D)
OK
raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D)
OK
raid6test: test_disks(5, 9): faila= 5(D) failb= 9(D)
OK
raid6test: test_disks(5, 10): faila= 5(D) failb= 10(P)
OK
raid6test: test_disks(5, 11): faila= 5(D) failb= 11(Q)
OK
raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D)
OK
raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D)
OK
raid6test: test_disks(6, 9): faila= 6(D) failb= 9(D)
OK
raid6test: test_disks(6, 10): faila= 6(D) failb= 10(P)
OK
raid6test: test_disks(6, 11): faila= 6(D) failb= 11(Q)
OK
raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D)
OK
raid6test: test_disks(7, 9): faila= 7(D) failb= 9(D)
OK
raid6test: test_disks(7, 10): faila= 7(D) failb= 10(P)
OK
raid6test: test_disks(7, 11): faila= 7(D) failb= 11(Q)
OK
raid6test: test_disks(8, 9): faila= 8(D) failb= 9(D)
OK
raid6test: test_disks(8, 10): faila= 8(D) failb= 10(P)
OK
raid6test: test_disks(8, 11): faila= 8(D) failb= 11(Q)
OK
raid6test: test_disks(9, 10): faila= 9(D) failb= 10(P)
OK
raid6test: test_disks(9, 11): faila= 9(D) failb= 11(Q)
OK
raid6test: test_disks(10, 11): faila= 10(P) failb= 11(Q)
OK
raid6test: testing the 16-disk case...
raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D)
OK
raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D)
OK
raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D)
OK
raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D)
OK
raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D)
OK
raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D)
OK
raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D)
OK
raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D)
OK
raid6test: test_disks(0, 9): faila= 0(D) failb= 9(D)
OK
raid6test: test_disks(0, 10): faila= 0(D) failb= 10(D)
OK
raid6test: test_disks(0, 11): faila= 0(D) failb= 11(D)
OK
raid6test: test_disks(0, 12): faila= 0(D) failb= 12(D)
OK
raid6test: test_disks(0, 13): faila= 0(D) failb= 13(D)
OK
raid6test: test_disks(0, 14): faila= 0(D) failb= 14(P)
OK
raid6test: test_disks(0, 15): faila= 0(D) failb= 15(Q)
OK
raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D)
OK
raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D)
OK
raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D)
OK
raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D)
OK
raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D)
OK
raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D)
OK
raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D)
OK
raid6test: test_disks(1, 9): faila= 1(D) failb= 9(D)
OK
raid6test: test_disks(1, 10): faila= 1(D) failb= 10(D)
OK
raid6test: test_disks(1, 11): faila= 1(D) failb= 11(D)
OK
raid6test: test_disks(1, 12): faila= 1(D) failb= 12(D)
OK
raid6test: test_disks(1, 13): faila= 1(D) failb= 13(D)
OK
raid6test: test_disks(1, 14): faila= 1(D) failb= 14(P)
OK
raid6test: test_disks(1, 15): faila= 1(D) failb= 15(Q)
OK
raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D)
OK
raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D)
OK
raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D)
OK
raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D)
OK
raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D)
OK
raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D)
OK
raid6test: test_disks(2, 9): faila= 2(D) failb= 9(D)
OK
raid6test: test_disks(2, 10): faila= 2(D) failb= 10(D)
OK
raid6test: test_disks(2, 11): faila= 2(D) failb= 11(D)
OK
raid6test: test_disks(2, 12): faila= 2(D) failb= 12(D)
OK
raid6test: test_disks(2, 13): faila= 2(D) failb= 13(D)
OK
raid6test: test_disks(2, 14): faila= 2(D) failb= 14(P)
OK
raid6test: test_disks(2, 15): faila= 2(D) failb= 15(Q)
OK
raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D)
OK
raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D)
OK
raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D)
OK
raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D)
OK
raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D)
OK
raid6test: test_disks(3, 9): faila= 3(D) failb= 9(D)
OK
raid6test: test_disks(3, 10): faila= 3(D) failb= 10(D)
OK
raid6test: test_disks(3, 11): faila= 3(D) failb= 11(D)
OK
raid6test: test_disks(3, 12): faila= 3(D) failb= 12(D)
OK
raid6test: test_disks(3, 13): faila= 3(D) failb= 13(D)
OK
raid6test: test_disks(3, 14): faila= 3(D) failb= 14(P)
OK
raid6test: test_disks(3, 15): faila= 3(D) failb= 15(Q)
OK
raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D)
OK
raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D)
OK
raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D)
OK
raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D)
OK
raid6test: test_disks(4, 9): faila= 4(D) failb= 9(D)
OK
raid6test: test_disks(4, 10): faila= 4(D) failb= 10(D)
OK
raid6test: test_disks(4, 11): faila= 4(D) failb= 11(D)
OK
raid6test: test_disks(4, 12): faila= 4(D) failb= 12(D)
OK
raid6test: test_disks(4, 13): faila= 4(D) failb= 13(D)
OK
raid6test: test_disks(4, 14): faila= 4(D) failb= 14(P)
OK
raid6test: test_disks(4, 15): faila= 4(D) failb= 15(Q)
OK
raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D)
OK
raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D)
OK
raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D)
OK
raid6test: test_disks(5, 9): faila= 5(D) failb= 9(D)
OK
raid6test: test_disks(5, 10): faila= 5(D) failb= 10(D)
OK
raid6test: test_disks(5, 11): faila= 5(D) failb= 11(D)
OK
raid6test: test_disks(5, 12): faila= 5(D) failb= 12(D)
OK
raid6test: test_disks(5, 13): faila= 5(D) failb= 13(D)
OK
raid6test: test_disks(5, 14): faila= 5(D) failb= 14(P)
OK
raid6test: test_disks(5, 15): faila= 5(D) failb= 15(Q)
OK
raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D)
OK
raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D)
OK
raid6test: test_disks(6, 9): faila= 6(D) failb= 9(D)
OK
raid6test: test_disks(6, 10): faila= 6(D) failb= 10(D)
OK
raid6test: test_disks(6, 11): faila= 6(D) failb= 11(D)
OK
raid6test: test_disks(6, 12): faila= 6(D) failb= 12(D)
OK
raid6test: test_disks(6, 13): faila= 6(D) failb= 13(D)
OK
raid6test: test_disks(6, 14): faila= 6(D) failb= 14(P)
OK
raid6test: test_disks(6, 15): faila= 6(D) failb= 15(Q)
OK
raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D)
OK
raid6test: test_disks(7, 9): faila= 7(D) failb= 9(D)
OK
raid6test: test_disks(7, 10): faila= 7(D) failb= 10(D)
OK
raid6test: test_disks(7, 11): faila= 7(D) failb= 11(D)
OK
raid6test: test_disks(7, 12): faila= 7(D) failb= 12(D)
OK
raid6test: test_disks(7, 13): faila= 7(D) failb= 13(D)
OK
raid6test: test_disks(7, 14): faila= 7(D) failb= 14(P)
OK
raid6test: test_disks(7, 15): faila= 7(D) failb= 15(Q)
OK
raid6test: test_disks(8, 9): faila= 8(D) failb= 9(D)
OK
raid6test: test_disks(8, 10): faila= 8(D) failb= 10(D)
OK
raid6test: test_disks(8, 11): faila= 8(D) failb= 11(D)
OK
raid6test: test_disks(8, 12): faila= 8(D) failb= 12(D)
OK
raid6test: test_disks(8, 13): faila= 8(D) failb= 13(D)
OK
raid6test: test_disks(8, 14): faila= 8(D) failb= 14(P)
OK
raid6test: test_disks(8, 15): faila= 8(D) failb= 15(Q)
OK
raid6test: test_disks(9, 10): faila= 9(D) failb= 10(D)
OK
raid6test: test_disks(9, 11): faila= 9(D) failb= 11(D)
OK
raid6test: test_disks(9, 12): faila= 9(D) failb= 12(D)
OK
raid6test: test_disks(9, 13): faila= 9(D) failb= 13(D)
OK
raid6test: test_disks(9, 14): faila= 9(D) failb= 14(P)
OK
raid6test: test_disks(9, 15): faila= 9(D) failb= 15(Q)
OK
raid6test: test_disks(10, 11): faila= 10(D) failb= 11(D)
OK
raid6test: test_disks(10, 12): faila= 10(D) failb= 12(D)
OK
raid6test: test_disks(10, 13): faila= 10(D) failb= 13(D)
OK
raid6test: test_disks(10, 14): faila= 10(D) failb= 14(P)
OK
raid6test: test_disks(10, 15): faila= 10(D) failb= 15(Q)
OK
raid6test: test_disks(11, 12): faila= 11(D) failb= 12(D)
OK
raid6test: test_disks(11, 13): faila= 11(D) failb= 13(D)
OK
raid6test: test_disks(11, 14): faila= 11(D) failb= 14(P)
OK
raid6test: test_disks(11, 15): faila= 11(D) failb= 15(Q)
OK
raid6test: test_disks(12, 13): faila= 12(D) failb= 13(D)
OK
raid6test: test_disks(12, 14): faila= 12(D) failb= 14(P)
OK
raid6test: test_disks(12, 15): faila= 12(D) failb= 15(Q)
OK
raid6test: test_disks(13, 14): faila= 13(D) failb= 14(P)
OK
raid6test: test_disks(13, 15): faila= 13(D) failb= 15(Q)
OK
raid6test: test_disks(14, 15): faila= 14(P) failb= 15(Q)
OK
raid6test:
raid6test: complete (257 tests, 0 failures)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
md: Waiting for all devices to be available before
autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (hda1): mounted filesystem with ordered data mode
VFS: Mounted root (ext3 filesystem) readonly on device
3:1.
devtmpfs: mounted
Freeing unused kernel memory: 916k freed
firewire_net: firewire0: IPv4 over FireWire on device
000039000061e892
firewire_core: refreshed device fw0
udevd (3479): /proc/3479/oom_adj is deprecated, please use
/proc/3479/oom_score_adj instead.
intel_rng: FWH not detected
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH4-M TCO device (Version=1,
TCOBASE=0xd860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
input: Toshiba input device as
/devices/virtual/input/input10
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
toshiba_acpi: HCI method: \_SB_.VALZ.GHCI
Registered led device: toshiba::illumination
usb 4-2: new full speed USB device using uhci_hcd and
address 2
Intel ICH 0000:00:1f.5: power state changed by ACPI to D0
Intel ICH 0000:00:1f.5: power state changed by ACPI to D0
Intel ICH 0000:00:1f.5: enabling device (0000 -> 0003)
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11
(level, low) -> IRQ 11
Intel ICH 0000:00:1f.5: setting latency timer to 64
rtc0: alarms up to one year, 114 bytes nvram
usb 4-2: New USB device found, idVendor=0930,
idProduct=0505
usb 4-2: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
ivtv: Start initialization, version 1.4.2
ivtv0: Initializing card 0
ivtv0: Unknown card: vendor/device: [4444:0016]
ivtv0: subsystem vendor/device: [1179:0001]
ivtv0: cx23416 based
ivtv0: Defaulting to Hauppauge WinTV PVR-150 card
ivtv0: Please mail the vendor/device and subsystem
vendor/device IDs and what kind of
ivtv0: card you have to the ivtv-devel mailinglist
(www.ivtvdriver.org)
ivtv0: Prefix your subject line with [UNKNOWN IVTV CARD].
cfg80211: Calling CRDA to update world regulatory domain
ivtv 0000:02:09.0: enabling device (0000 -> 0002)
ivtv 0000:02:09.0: PCI INT A -> Link[LNKD] -> GSI 11
(level, low) -> IRQ 11
intel8x0_measure_ac97_clock: measured 50539 usecs (2436
samples)
intel8x0: clocking to 48000
tveeprom 3-0050: Huh, no eeprom present (err=-6)?
tveeprom 3-0050: Encountered bad packet header [c8].
Corrupt or not a Hauppauge eeprom.
ivtv0: Invalid EEPROM
libipw: 802.11 data/management/control stack, git-1.1.13
libipw: Copyright (C) 2004-2005 Intel Corporation
<jketreno@xxxxxxxxxxxxxxx>
pcmcia_socket pcmcia_socket0: cs: IO port probe
0xc00-0xcff: excluding 0xcf8-0xcff
pcmcia_socket pcmcia_socket0: cs: IO port probe
0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe
0x800-0x80f: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe
0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x480-0x48f 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe
0x100-0x3af: excluding 0x170-0x177 0x1e0-0x1f7 0x320-0x327
0x350-0x357 0x370-0x377
pcmcia_socket pcmcia_socket0: cs: memory probe
0x0c0000-0x0fffff: excluding 0xc0000-0xcffff
0xe0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe
0x60000000-0x60ffffff: clean.
pcmcia_socket pcmcia_socket0: cs: memory probe
0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
pcmcia_socket pcmcia_socket0: cs: IO port probe
0xa00-0xaff: clean.
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver,
1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
cx25840 3-0044: Unable to detect h/w, assuming cx23887
cx25840 3-0044: cx23887 A/V decoder found @ 0x88 (ivtv i2c
driver #0)
i2c-core: driver [tuner] using legacy suspend method
i2c-core: driver [tuner] using legacy resume method
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
Chip ID is not zero. It is not a TEA5767
tuner 3-0060: chip found @ 0xc0 (ivtv i2c driver #0)
wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #0)
wm8775 3-001b: I2C: cannot write 000 to register R23
wm8775 3-001b: I2C: cannot write 000 to register R7
wm8775 3-001b: I2C: cannot write 021 to register R11
wm8775 3-001b: I2C: cannot write 102 to register R12
wm8775 3-001b: I2C: cannot write 000 to register R13
wm8775 3-001b: I2C: cannot write 1d4 to register R14
wm8775 3-001b: I2C: cannot write 1d4 to register R15
wm8775 3-001b: I2C: cannot write 1bf to register R16
wm8775 3-001b: I2C: cannot write 185 to register R17
wm8775 3-001b: I2C: cannot write 0a2 to register R18
wm8775 3-001b: I2C: cannot write 005 to register R19
wm8775 3-001b: I2C: cannot write 07a to register R20
wm8775 3-001b: I2C: cannot write 102 to register R21
ivtv0: Registered device video0 for encoder MPG (4096 kB)
ivtv0: Registered device video32 for encoder YUV (2048 kB)
ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
ivtv0: Registered device video24 for encoder PCM (320 kB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Initialized card: Hauppauge WinTV PVR-150
ipw2200 0000:02:05.0: PCI INT A -> Link[LNKA] -> GSI 11
(level, low) -> IRQ 11
ivtv: End initialization
ipw2200: Detected Intel PRO/Wireless 2200BG Network
Connection
ipw2200: Detected geography ZZM (11 802.11bg channels, 0
802.11a channels)
EXT3-fs (hda1): using internal journal
lp: driver loaded but no devices found
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
usbcore: registered new interface driver snd-usb-audio
Broadcom 43xx driver loaded [ Features: PMNLS,
Firmware-ID: FW13 ]
Broadcom 43xx-legacy driver loaded [ Features: PLID,
Firmware-ID: FW10 ]
rt2860sta: module is from the staging directory, the
quality is unknown, you have been warned.
---
Professional hosting for everyone - http://www.host.ru
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
